Weekend Special Limited Time 70% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code = simple70

Pass the A10 Networks System Administration 4 A10-System-Administration Questions and answers with ExamsMirror

Practice at least 50% of the questions to maximize your chances of passing.
Exam A10-System-Administration Premium Access

View all detail and faqs for the A10-System-Administration exam

Go to Exam

436 Students Passed

89% Average Score

94% Same Questions
Viewing page 1 out of 1 pages
Viewing questions 1-10 out of questions
Questions # 1:

In the following configuration:

Question # 1

Where network 3.0.0.x on each device is on a VE interface dedicated to aVCS traffic, what must you do to ensure that command “device-context x” always succeeds?

Options:

A.

Verify the interface is untagged on each device.

B.

Enable management service ssh on that interface for each device.

C.

Configure vcs floating-ip on network 3.0.0.0 /24.

D.

Apply acl ”permit 3.0.0.0 /24” on that interface for each device.

Questions # 2:

When private partitions are created on a device where VRRP-A is enabled, which statement is true?

Options:

A.

No VRIDs are configured on a private partition until explicitly configured.

B.

VRID 0 is configured with settings identical to VRID 0 on the shared partition.

C.

All VRIDs on the shared partition are replicated on the private partitions.

D.

VRID 0 is configured with its default settings.

E.

VRRP-A is not available on private partitions.

Questions # 3:

When VRRP-A is enabled on a device with multiple partitions, which statement about VRID 0 is correct?

Options:

A.

Each partition has its own distinct VRID 0.

B.

VRID 0 only exists in the shared partition; private partitions can only contain VRIDs numbered higher than 0.

C.

VRID 0 is initially enabled only in the shared partition; partition administrators can enable VRID 0 in their partitions.

D.

When using VRRP-A on a device with multiple partitions, VRID 0 is automatically disabled.

Questions # 4:

You are planning an Active-Active-Active VRRP-A three-device deployment that, upon failover of any device, distributes the load from a single device to both standby devices simultaneously. How many VRIDs are required?

Options:

A.

2

B.

VRID Default is enough

C.

6

D.

5

E.

3

F.

4

Questions # 5:

Which statement correctly describes the result of the following commands?

ACOS(config)#logging host 192.168.216.45

ACOs(config)#end

ACOS#active-partition p1

Currently active partition: p1

ACOS[p1](config)#logging host 2.2.2.2

ACOS[p1](config)#logging host partition shared

Options:

A.

System logs generated from partition “p1” will be sent to logging server “2.2.2.2”, and only warning severity log messages are sent to the shared logging server’s “192.168.216.45”.

B.

System logs generated from partition “p1” will be sent to logging server “2.2.2.2”, as well as to the shared logging server’s “192.168.216.45”.

C.

System logs generated from partition “p1” will be sent to logging server “2.2.2.2”.

D.

System logs generated from partition “p1” will be sent to the shared logging server’s “192.168.216.45”.

Questions # 6:

ACOS can log the following accounting records for administrative sessions:

Options:

A.

device access attempts only

B.

syslog errors of a specified severity level

C.

device access and command entry attempts

D.

command entry attempts only

E.

syslog errors of severity greater than a specified level

Questions # 7:

In a VRRP-A topology that contains four devices, select the number of devices on which a single VRID can be simultaneously active?

Options:

A.

1

B.

2

C.

3

D.

4

Questions # 8:

When vBlade A issues a “vcs vmaster-take-over 200” command, which statement is true?

Options:

A.

The command is ignored when the current vMaster is in vMaster maintenance mode.

B.

Any subsequent vmaster-take-over command within the chassis with a parameter smaller than 201 is ignored.

C.

The 200 priority is compared to the current vmaster’s default vrid priority to determine which device controls the chassis.

D.

If an administrator on vBlade B were to simultaneously issue command vcs vmaster-take-over 210, vBlade B would become the vMaster.

Questions # 9:

Given the following VRID 2 configuration, which device will host the VRID after the three devices at the same time?

Question # 9

Options:

A.

Device 2

B.

Device 1

C.

VCS will randomly assign the VRID to a device based on the uptime of the device.

D.

Device 3

E.

The VRID will be hosted on all three devices at the same time.

Viewing page 1 out of 1 pages
Viewing questions 1-10 out of questions
TOP CODES

TOP CODES

Top selling exam codes in the certification world, popular, in demand and updated to help you pass on the first try.

2V0-11.25
ADM-201
Agentforce-Specialist
CMMC-CCP
Data-Cloud-Consultant
PCNSE
PDI
PSE-Strata-Pro-24
Secure-Software-Design
Sharing-and-Visibility-Architect
Workday-Pro-Integrations
ZDTA