Certified Wireless Specialist (CWS-100) Practice Test

Questions # 1:

What 802.11 fast roaming solution allows a client to authenticate to a different AP than that to which it is

connected through the AP to which it is connected?

Options:

Role-Based Access Control (RBAC)

Preauthentication

Captive Portal

Virtual Private Network (VPN)

Questions # 2:

When a WLAN must support only authorized users and no client device constraints exist, what security

solution should be used?

Options:

Shared Key Authentication

WPA

WPA2

WEP

Questions # 3:

What statement best defines a staggered channel plan or multiple channel architecture (MCA)?

Options:

Alternating overlapping channels for APs without concern for physical space between APs

Using one channel for all APs and controlling which APs communicate with a centralized controller

Using one channel for all APs and reducing the output power on every other AP

Alternating non-overlapping channels for APs with sufficient physical space provided before reusing a

channel

Questions # 4:

What is defined as the strength of an RF wave?

Options:

Phase

Wavelength

Amplitude

Frequency

Questions # 5:

What becomes shorter as the RF wave frequency rises?

Options:

Phase

Wavelength

Amplitude

Signal Strength

Questions # 6:

Why is it considered a mistake to use 160 MHz channels in most 5 GHz frequency band enterprise

deployments?

Options:

The available frequency space is insufficient for such an implementation

The data rates will be too high

The communication retry rates will decrease

The throughput will be too high

Questions # 7:

You must ensure Power over Ethernet (PoE) is available for new AP installations. What device can provide PoE power to the APs assuming it includes PoE support?

Options:

Link tester

Router

Switch

Ethernet coupler

Questions # 8:

What must be defined in order to properly determine capacity requirements?

Options:

Number of devices alone

Number of devices and application characteristics

Firmware version on neighboring network APs

Application characteristics alone

Questions # 9:

When planning for a bridge link between locations, in addition to the link distance, what requirement should be known in order to determine the antennas, settings and bridges to use?

Options:

Required color

Required power sourcing method

Required throughput

Required cable length

Questions # 10:

Why would you use external antennas for an AP mounted indoors?

Options:

To decrease the radio output power in a specific direction

To increase the maximum possible data rate of the AP

To accomplish a specific coverage objective

To decrease the cost of the AP

Viewing page 1 out of 2 pages

Viewing questions 1-10 out of questions

Weekend Special Limited Time 70% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code = simple70

Pass the CWNP CWS-Certified Wireless Specialist CWS-100 Questions and answers with ExamsMirror

Exam CWS-100 Premium Access

Options:

Options:

Options:

Options:

Options:

Options:

Options:

Options:

Options:

Options:

TOP CODES