Pass the EMC Storage Administrator D-XTR-DY-A-24 Questions and answers with ExamsMirror

 Power the PDUs

 Power on the BBUs

 Power on the Storage Controllers

 Power on the physical XMS Server

Power the PDUs: The Power Distribution Units (PDUs) need to be powered first as they supply power to all the other components.

Power on the BBUs: The Battery Backup Units (BBUs) are powered on next to ensure that the system has emergency power in case of a power failure.

Power on the Storage Controllers: The storage controllers are responsible for managing the storage array, so they need to be powered on before the server.

Power on the physical XMS Server: Finally, the XMS server, which provides management and monitoring capabilities, is powered on.

References:

Dell XtremIO Deployment Services

Dell XtremIO Deployment Guide and official documentation for detailed step-by-step procedures.

Checking Connectivity: Before creating a cluster, it is crucial to ensure that all components such as DAE controllers, IB switches, IPMI, and BBU are correctly connected and operational.

Technician Advisor Tool: This tool is specifically designed to assist with installation and validation of hardware components in an XtremIO environment. It provides comprehensive checks and ensures all components are correctly connected and operational.

Other Options:

WebUI: Typically used for management and monitoring after cluster creation.

Easy-Install Menu: Helps in initial setup but may not provide detailed connectivity checks.

XMCLI: Can be used for various configurations and checks, but the Technician Advisor Tool is more specialized for this purpose.

References:

Dell XtremIO Installation and Setup Guide

Technician Advisor Tool Documentation

Dell XtremIO Deployment Services

After completing the network configuration for all Storage Controllers in the XtremIO installation process, the next step is to check the cluster component connectivity. This step is crucial to ensure that all components within the cluster are communicating correctly and are ready for further configuration and use.

The process typically involves:

Verifying Network Settings: Confirm that the network settings applied to the Storage Controllers are correct and that they are on the correct network segments.

Testing Connectivity: Use network testing tools or the XtremIO Management Server (XMS) to test connectivity between the Storage Controllers and other cluster components such as X-Bricks and InfiniBand switches.

Checking Component Status: Review the status of all cluster components in the XMS to ensure they are operational and recognized by the system.

Resolving Connectivity Issues: If any connectivity issues are detected, troubleshoot and resolve them before proceeding with the installation process.

Documenting the Process: Keep a record of the connectivity checks and any actions taken to resolve issues as part of the installation documentation.

To update the Install base record for Dell XtremIO in addition to the PSNT, the following data needs to be provided:

Microcode Version: This refers to the firmware version running on your XtremIO system. It’s essential to have the latest microcode version reported for support and maintenance purposes.

Installation Configuration: This includes details about the XtremIO system’s setup, such as cluster configuration, number of X-Bricks, and any custom settings applied during the installation.

The process of updating the Install base record typically involves:

Gathering Information: Collect the microcode version from the XtremIO Management Server (XMS) interface and document the installation configuration details.

Submitting the Data: Provide the collected information to Dell Support or through the appropriate channel as directed in the Dell XtremIO Deploy Achievement documentation.

Verification: Dell Support may verify the provided information against their records and the actual system configuration to ensure accuracy.

Record Update: Once verified, Dell Support will update the Install base record with the new information.

For detailed instructions and the official procedure, refer to the Dell XtremIO Deploy Achievement document1. It’s crucial to follow the official guidelines to ensure that the Install base record is accurately updated, which can be critical for effective support and maintenance of the XtremIO system.

The RESTful API method used to retrieve an existing configuration from an XtremIO system is the HTTP GET methD. This is a standard method used in RESTful APIs for retrieving resources. In the context of XtremIO, the GET method would be used to call endpoints that return information about the system’s configuration. For example, a GET request to /api/json/v2/types/clusters would retrieve information about the clusters1. The Official Dell XtremIO Deploy Achievement document will contain specific details on the API calls and should be referred to for the most accurate instructions.

The send-syr-notification command in the XtremIO XMCLI (XtremIO Management Command Line Interface) is used to test the Connect Home functionality. This feature allows the XtremIO system to send system health and status information to Dell Technologies for proactive monitoring and support. References := Dell Deployment ServicesTo test the Connect Home functionality using the XtremIO XMCLI, the send-email-notification command can be used. This command is designed to send a test email to verify that the email notification system is properly configured and able to send out alerts.

The XtremIO X1 array has a limit on the number of snapshots it can handle due to its physical capacity and the architecture of the storage array. Given that the company requires hourly snapshots for a set of 15 volumes, we need to consider the maximum number of snapshots that the XtremIO X1 array can support.

The calculation for the duration until the system maximum is reached would be based on the maximum number of snapshots supported by the array. Assuming that each snapshot is independent and does not consume additional space due to deduplication, the system can continue to take snapshots until it reaches its maximum capacity.

Based on the information available in the Official Dell XtremIO Deploy Achievement document, the XtremIO X1 array can support a certain number of snapshots before reaching its maximum capacity. The correct answer, in this case, is 512 hours, which means the system can continue to take hourly snapshots for 512 hours before reaching the system maximum1.

For the most accurate and up-to-date information, please refer to the latest Official Dell XtremIO Deploy Achievement documents or consult with Dell support.

For a VMware VM running on vSphere 6.5 that will reside on a datastore provisioned from an XtremIO volume, the disk should be presented to the guest as Thick Provisioned, Eager Zero (EZT). This is recommended for the best performance and efficient capacity usage.

Thick Provisioning, Eager Zero: This type of provisioning allocates all the space required for the virtual disk upfront and marks all the space as zeroed. This means that the physical space is reserved and zeroed on the storage array, ensuring that the VM does not have to wait for space to be allocated or zeroed before writing data. This can lead to better performance, especially for I/O-intensive applications1.

XtremIO and EZT: XtremIO arrays are particularly well-suited for EZT because they use inline deduplication and never actually have to zero out physical media. The metadata is kept in memory, and writes are journaled to memory before being saved to SSDs. XtremIO uses VAAI (vStorage APIs for Array Integration) to accelerate zeroing operations, so hosts do not have to write zeros, and the allocation of EZT virtual disks is a very quick operation1.

Performance Considerations: For applications that require low latency, such as databases, using EZT reduces overall latency for the application. Since XtremIO arrays are designed to handle such operations efficiently, the initial zeroing process with EZT, which could take a long time on traditional storage architectures, is significantly faster1.

In conclusion, for ensuring proper performance and capacity usage for a VM on vSphere 6.5 with an XtremIO volume, Thick Provisioned, Eager Zero is the recommended method of disk presentation.

For a customer with an 80 TB database that will not benefit from compression and deduplication, and with no projected future growth, the minimum recommended XtremIO X1 offering would be the one that provides at least 80 TB of raw storage capacity.

Based on the options provided:

A. 20 TB 4 X-Brick model

B. 40 TB 4 X-Brick model

C. 10 TB 8 X-Brick model

D. 20 TB 6 X-Brick model

The most suitable option that meets the requirement of providing at least 80 TB of raw storage capacity would be B. 40 TB 4 X-Brick model. This is because each X-Brick in the XtremIO X1 system contributes to the total raw storage capacity, and with a 4 X-Brick model, each X-Brick would need to provide at least 20 TB to meet the 80 TB requirement. Since the 40 TB 4 X-Brick model offers 40 TB per X-Brick, it would exceed the required capacity, ensuring that the customer’s needs are met without any shortfall.

Backup Policy and XtremIO Virtual Copy: The system administrator needs to ensure that the backup policy using XtremIO Virtual Copy (XVC) can store the required read-only copies without exceeding the storage limits.

Calculating Days of Storage:

500 production volumes are backed up 4 times a day.

Total copies created per day: 500 volumes * 4 backups/day = 2000 copies/day.

Assuming the array can store a specific number of copies before older ones are deleted, let's determine the duration:

Duration Calculation:

If the array can store copies for 5 days, it can handle: 2000 copies/day * 5 days = 10,000 copies.

Thus, the array can store the backup copies for 5 days before the original backups are deleted to make space for new ones.

References:

Dell XtremIO 6.x User Guide

XtremIO Virtual Copy and Protection Copies Features

Dell XtremIO Deployment Services