Pass the HP Hybrid Cloud HPE0-V26 Questions and answers with ExamsMirror

This is because the HPE ProLiant DL360 Gen10 server is a rack server that delivers security, agility and flexibility without compromise. It supports the Intel Xeon Scalable processor with up to a 60% performance gain and 27% increase in cores, along with 2933 MT/s HPE DDR4 SmartMemory supporting up to 3.0 TB with an increase in performance of up to 82%.1 It also has a small footprint and can fit in a limited space.

HPE MSA2062 -> Provides storage for two HPE ProLiant DL380 Gen10 servers in a branch office1 HPE SimpliVity -> Enterprise HCI with integrated compute storage and data protection2 HPE StoreEver LTO 9 Ultruim 45000 External Tape Drive -> Secures backup data with an air-gap separation3 HPE StoreOnce 3660 -> Provides a disk-based backup functionality with efficient deduplication

According to IBM, a SAN is a dedicated network that provides access to consolidated, block-level data storage1. A SAN allows multiple servers to access shared pools of storage devices, such as disk arrays or tape libraries1. A SAN can help your customer consolidate data and add additional block-based storage to their main document management application.

According to HPE, the TCO/ROI Calculator is a tool that helps you compare the total cost of ownership (TCO) and return on investment (ROI) of different server solutions1. It can help you demonstrate how a server refresh can reduce costs, improve performance, and increase efficiency for your customer.

 one of the topics covered in the module 4 of the Implementing HPE MSA Storage Solutions course is “Explain the firmware update process on MSA”. This suggests that the firmware update is a maintenance task that can be performed with the Storage Management utility v4.

F10 Save

To set the email notification option, you need to go to the “Administration” tab and select the “Management” option. Then you need to enter the email address and SMTP server information in the “AlertMail” section and enable the “AlertMail” feature. You can also specify which events you want to receive emails for by selecting the appropriate severity level.

This is because HPE Remote Support is a service that provides proactive and reactive support for HPE servers, storage, and networking products. It enables automatic fault detection and diagnosis, remote troubleshooting, and case creation and management. To use this service, the server must be connected to an HPE Remote Support Host Server, which is a server that runs the HPE Remote Support software and communicates with the HPE Support Center

According to the HPE website, HPE InfoSight supports automatic case creation for HPE ProLiant servers that are connected to HPE InfoSight through HPE Integrated Lights-Out (iLO) Amplifier Pack1. The ProLiant DL560 Gen10 is one of the supported servers that can benefit from this feature1.

HPE MSA Health Check Tool is a web-based tool that provides a comprehensive health check of an HPE MSA 1060/2060/2062 storage array. The tool analyzes the array configuration, performance, and logs and provides a detailed report with recommendations based on HPE best practices. The tool can also generate a support ticket if any issues are detected.

The HPE MSA Health Check Tool is available for download from the HPE Support Center website1. The tool requires an active warranty or support contract for the array.