Weekend Special Limited Time 70% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code = simple70

Pass the HP ACMX HPE6-A79 Questions and answers with ExamsMirror

Practice at least 50% of the questions to maximize your chances of passing.
Exam HPE6-A79 Premium Access

View all detail and faqs for the HPE6-A79 exam


398 Students Passed

94% Average Score

93% Same Questions
Viewing page 1 out of 2 pages
Viewing questions 1-10 out of questions
Questions # 1:

A fully functional WLAN is deployed in a campus network using the following script.

Question # 1

Which part of the script can a network administrator re-use to assign a different default role to users when they connect to the same SSID in a second building?

Options:

A.

server group and ssid profile

B.

server group and VAP profile

C.

server group, aaa profile, and ssid profile

D.

server group and VAP

Questions # 2:

Refer to the exhibit.

Question # 2

A network administrator has recently enabled WMM on the VAP’s SSID profile and enabled UCC Skype4B ALG at the Mobility Master level. During testing, some voice and video conference calls were made, and it was concluded that the call quality has dramatically improved. However, end to end information isn’t displayed in the call’s details. Also, Skype4B app-sharing’s performance is poor at times.

What must the administrator do next in order to enable end to end call visibility and QoS correction to app-sharing service?

Options:

A.

Deploy the SDN API Software in the Skype4B Solution and point to the MM.

B.

Increase the app-sharing DSCP value in the Skype4B ALG profile.

C.

Enable UCC monitoring on the "default-controller' mgmt.-server profile.

D.

Enable the App-sharing ALG profile at both MM and MD hierarchy levels.

Questions # 3:

Refer to the exhibits.

Exhibit 1

Question # 3

Exhibit 2

Question # 3

Exhibit 3

Question # 3

A network administrator wants to allow contractors to access the corporate WLAN named EmployeesNet with the contractor role in VLAN 40. When users connect, they do not seem to get an IP address. After some verification checks, the network administrator confirms the DHCP server (10.254.1.21) is reachable from the Mobility Controller (MC) and obtains the outputs shown in the exhibits.

What should the network administrator do next to troubleshoot this problem?

Options:

A.

Permit UDP67 to the contractor role.

B.

Remove the IP address in VLAN 40.

C.

Configure the DHCP helper address.

D.

Confirm there is an IP pool for VLAN 40.

Questions # 4:

Refer to the exhibit.

Question # 4

The network administrator must ensure that the configuration will force users to authenticate periodically every eight hours. Which configuration is required to effect this change?

Options:

A.

Set the reauth-period to 28800 enable reauthentication in the dotlx profile.

B.

Set the reauth-period to 28800 enable reauthentication in the AAA profile.

C.

Set the reauth-period to 28800 enable reauthentication in both dotlx and AAA profile.

D.

Set the reauth-period to 28800 in the dotlx profile and enable reauthentication in the AAA profile.

Questions # 5:

Refer to the exhibit

Question # 5

A network administrator deploys a standalone Mobility Controller (MC) and configures some VAPs within the CAMPUS AP group. The network administrator realizes that none of the VAPs are being broadcasted.

Based on the output shown in the exhibit, what should the network administrator do to solve this problem?

Options:

A.

Install MC-VA licenses, then install PEF licenses and enabled the PEF feature.

B.

Install MC-VA licenses, then reprovision the APs.

C.

Install MM licenses, then install PEF licenses and enable the PEF feature.

D.

Install MM licenses and install MC-VA licenses, then install RFP licenses.

Questions # 6:

Refer to the exhibit.

Question # 6

A network administrator has a Mobility Master (MM) Mobility Controller (MC) architecture along with the MC in the DMZ for terminating RAPs. The network firewall has been provisioned to allow access to the MC in the DMZ for both UDP 500 and 4500. Then he proceeds to provision an AP as shown in the exhibit.

Which additional configuration steps must the administrator to assure RAPs successfully contact the MC? (Choose two.)

Options:

A.

Create the RAP1 account in the InternalDB of the MC.

B.

Create an IP local pool and PSK at the device node level.

C.

Create the RAP1 account in the InternalDB of the MM.

D.

Add the RAP1 entry in the CPsec whitelist at the MM level.

E.

Create an IP local pool and PSK at the /mm/mynode level.

Questions # 7:

Refer to the exhibit.

Question # 7

A network administrator has created AAA profile for the corporate VAP. In addition to the regular Radius based authentication, the administrator needs to be able to disconnect the users from either of the two servers that are part of the “Radius” server group.

What must the administrator do next in order to achieve this goal?

Options:

A.

Use the "Radius" server group as the RADIUS Accounting Server Group in the AAA profile.

B.

Create two new RFC 3576 servers and assign them as the RFC 3576 servers in the AAA profile.

C.

Use the "Radius' server group as both the Accounting Server Group and the RFC 3576 server in the AAA profile.

D.

Use the "Radius' server group as the RFC 3576 server in the AAA profile.

Questions # 8:

Refer to the exhibit.

Question # 8

Based on the output shown in the exhibit, which channel offers the highest quality?

Options:

A.

Channel 1

B.

Channel 6

C.

Channel 11

D.

Channel 14

Questions # 9:

Refer to the exhibits.

Exhibit 1

Question # 9

Exhibit 2

Question # 9

Exhibit 3

Question # 9

Exhibit 4

Question # 9

A captive portal-based solution is deployed in a Mobility Master (MM) - Mobility Controller (MC) network. A wireless station connects to the network and attempts the authentication process. The outputs are shown in the exhibits.

Which names correlate with the authentication and captive portal servers?

Options:

A.

ClearPass.23 is the authentication server, and cp.mycompany.com is the captive portal server.

B.

ClearPass.23 is the authentication server, and MC2 is the captive portal server.

C.

Internal database in MC2 is the authentication server, and cp.mycompany.com is the captive portal server.

D.

cp.mycompany.com is the authentication server, and ClearPass.23 is the captive portal server.

Questions # 10:

An organization owns a fully functional multi-controller Aruba network with a Virtual Mobility Master (VMM) in VLAN20. They have asked a network consultant to deploy a redundant MM on a different server. The solution must offer the lowest convergence time and require no human interaction in case of failure.

The servers host other virtual machines and are connected to different switches that implement ACLs to protect them. The organization grants the network consultant access to the servers only, and appoints a network administrator to assist with the deployment.

What must the network administrator do so the network consultant can successfully deploy the solution? (Choose two.)

Options:

A.

Allocate VLAN20 to the second server, and extend it throughout the switches, then reserve one IP address for the second MM and another IP address for its gateway.

B.

B. Allocate VLAN20 to the second server, and permit routing between them, then reserve one IP address for the second MM and another IP address for its gateway.

C.

Configure an ACL entry that permits IP protocol 50, UDP port 500, and multicast IP 224.0.0.18.

D.

Allocate VLAN20 to the second server, and extend it throughout the switches, then reserve one IP address for the second MM and another for the VIP.

E.

Configure an ACL entry that permits UDP 500, TCP 4500, and multicast IP 224.0.0.5.

Viewing page 1 out of 2 pages
Viewing questions 1-10 out of questions
TOP CODES

TOP CODES

Top selling exam codes in the certification world, popular, in demand and updated to help you pass on the first try.