Pass the Huawei HCSP Presales H19-404_V1.0 Questions and answers with ExamsMirror

In the product and course version covered by this examination, SD-WAN virtual CPEs can be deployed on AWS, Alibaba Cloud, and Microsoft Azure. A vCPE such as Huawei AR1000V provides SD-WAN routing functions as a virtual machine within a supported public-cloud infrastructure. It can connect enterprise branches to workloads hosted in the cloud and bring the cloud environment under the same controller-based management and policy-orchestration framework as physical CPEs.

This deployment provides one-hop cloud access, avoids unnecessarily routing cloud-bound traffic through a remote headquarters, and enables unified overlay networking between branches, data centers, and cloud virtual networks. Huawei states that the AR1000V virtual SD-WAN router can be deployed in public clouds to implement branch-to-cloud interconnection and unified policy orchestration. Huawei also describes flexible deployment of physical CPEs and vCPEs for cloud-access and PoP-based acceleration scenarios.

Huawei Cloud is not included in the supported public-cloud list represented by this specific H19-404 question. Product compatibility is version-dependent, so the correct examination answer is A, B, and C.

==================

Huawei SD-WAN provides all four technologies. Per-flow load balancing distributes separate application flows among multiple links that have the same priority and satisfy the required SLA. Per-packet load balancing can transmit packets from one flow across multiple eligible links, improving aggregate bandwidth utilization for large file transfers, backups, and replication.

Multi-fed and selective receiving duplicates critical traffic across different links. The receiving device selects valid packets, removes duplicates, and preserves packet order. Packet loss or failure on one path therefore does not interrupt the service, enabling zero-millisecond link switchover in applicable deployments.

A-FEC dynamically generates redundant packets and adjusts the redundancy ratio according to measured packet loss. The receiving device reconstructs lost packets, reducing video freezing and voice-quality deterioration. Huawei describes both adaptive FEC and multi-fed selective receiving as WAN-optimization mechanisms for key traffic.

Intelligent traffic steering selects links according to application identity, quality, bandwidth, priority, and load. Therefore, A, B, C, and D are all correct.

==================

WAPI, or WLAN Authentication and Privacy Infrastructure, is the wireless LAN security standard proposed by China. It provides wireless link authentication and data-protection mechanisms and was developed as an alternative security framework for WLAN environments. Huawei’s training material explicitly identifies WAPI as a WLAN security standard proposed in China and states that it provides stronger protection than legacy WEP and WPA mechanisms.

WPA, WPA2, and WPA3 belong to the Wi-Fi Protected Access family maintained through Wi-Fi industry certification. WPA was introduced as an interim improvement over WEP. WPA2 adopted stronger IEEE 802.11i security mechanisms, including AES-based CCMP. WPA3 later introduced stronger password-authentication and enterprise-security options.

WAPI incorporates authentication and encryption as part of an integrated wireless security architecture. Its deployment depends on regional requirements, terminal compatibility, AP support, and the organization’s regulatory or cryptographic-policy obligations. The question asks which standard originated as a Chinese wireless security standard, not which standard is most widely deployed internationally. Therefore, WAPI is the only correct choice, making option B the verified answer.

==================

A border device, or more precisely a device at a border site, provides communication between different areas in a hierarchical SD-WAN topology. The hierarchical model divides a large WAN into multiple areas. Each area can independently use a hub-spoke or full-mesh topology, while selected border sites connect the local area to a centralized backbone area.

When a non-border site receives a route originating in another area, the route’s next-hop site ID is changed to the border site in its own area. The local border device then forwards traffic toward the border site in the destination area or toward an interconnected hub site. Ordinary edge devices provide connectivity for their own sites but do not automatically perform cross-area transit.

Huawei describes border sites as members of both the level-2 area network and the level-1 backbone network. These sites collectively implement interconnection between areas. Huawei further explains that inter-area routes point to border sites and recommends two border sites operating in active/standby mode for reliability. Therefore, the correct answer is B.

==================

A network serving 15,000 wireless terminals is a large-scale WLAN and should use a standalone WAC solution. A dedicated WAC provides independent controller resources, scalable AP and user management, centralized WLAN policy control, and the ability to deploy controller redundancy without tying wireless-control capacity directly to a specific core-switch service card.

Huawei recommends a standalone WAC when the wireless network scale is large or when the wireless network is deployed independently over an existing wired campus. The WAC is typically connected to the aggregation or core layer in off-path mode, and VRRP hot standby can be used to improve reliability.

Native WAC solutions are valuable for unified wired and wireless management, authentication, forwarding, and policy enforcement. However, for a very large number of wireless terminals, the controller platform must be selected according to user, AP, traffic, and forwarding-capacity specifications. A standalone WAC allows the wireless control plane to be sized and expanded independently.

Option C provides the dedicated WAC together with the required core and aggregation or access infrastructure. Therefore, it is the recommended architecture for 15,000 wireless terminals.

The AirEngine 6776I-X6TH is the model designed to provide PCIe card-based IoT expansion. The PCIe interface enables an appropriate IoT expansion card to be installed so that the AP can support additional wireless or sensing technologies according to the deployment requirement. This allows the same physical access infrastructure to deliver enterprise Wi-Fi and IoT connectivity.

The capability is useful in retail, healthcare, education, manufacturing, and asset-management environments, where technologies such as Bluetooth, RFID, Zigbee, electronic shelf labels, location services, or specialized sensing systems may need to coexist with the WLAN. A modular card design is preferable when an organization requires selectable or upgradeable IoT functions rather than only fixed integrated capabilities.

Huawei’s Wi-Fi and IoT convergence architecture reduces repeated cabling, separate power systems, and independently managed wireless networks. It enables an IoT-capable AP to provide the installation position, power, management connectivity, and uplink data channel required by IoT modules. Among the models listed, the AirEngine 6776I-X6TH is the PCIe card-based IoT model. Therefore, option A is correct.

==================

The Network Management System is not an element of the IFIT measurement model. An IFIT measurement definition identifies the traffic to be measured, the locations where measurement actions occur, and the direction in which the flow is evaluated. The measurement flow specifies the target packets, usually through flow-identification fields. Measurement points define where packets are marked, counted, timestamped, or reported, such as ingress, transit, and egress nodes. Measurement direction distinguishes forward and reverse monitoring so that packet loss, delay, and path behavior can be analyzed correctly for each direction.

An NMS or controller remains operationally important because it creates measurement tasks, distributes configurations, receives telemetry data, correlates the results, and presents fault-location information. However, it is the management and analysis system surrounding the measurement model, not one of the model’s constituent measurement parameters.

Huawei positions IFIT as a high-precision telemetry mechanism used to delimit and locate application-quality faults. The training material highlights IFIT’s capability to locate faults rapidly and detect packet loss with extremely high reliability. Therefore, the component that is not part of the measurement model is the NMS.

==================

All four options can be used as conditions by the iMaster NCE-Campus intelligent policy engine. Huawei describes this capability through a 5W1H-based policy model. “Who” represents the user identity, user group, or role. “Where” represents the access location, including the site, region, device group, device, SSID, or IP address. “How” represents the access mode, such as wired or wireless access and the authentication method used. “What” represents the terminal type or device attributes, including PCs and mobile operating systems.

The platform can combine these conditions rather than evaluating them independently. For example, a finance employee using a corporate laptop through wired 802.1X access at headquarters can receive different permissions from the same employee connecting through a personal mobile device at a branch. The authorization result can include a VLAN, ACL, security group, bandwidth limit, DSCP value, application policy, or URL-filtering rule.

This multidimensional evaluation enables context-aware, fine-grained access control. Therefore, A, B, C, and D are all correct.

==================

Huawei SD-WAN allows encryption to be controlled by virtual network and by specific device relationships. When encryption is enabled for a VN, the overlay data channels carrying that VN’s traffic use IPsec protection across the relevant WAN links. This provides consistent isolation and confidentiality for the department or service represented by that VN.

Encryption can also be enabled between selected devices or sites. In that case, secure data channels are established for traffic exchanged between those specified endpoints, while other device relationships can continue using GRE without IPsec according to their policies.

Application-specific encryption, as described in option C, is not the supported control granularity. Application identification can influence intelligent traffic steering, QoS, and security-policy selection, but it does not mean that only the payload of a selected application is independently encrypted inside an otherwise unencrypted SD-WAN tunnel.

A transport network is an underlay WAN such as MPLS or the Internet. Enabling encryption is an overlay tunnel policy rather than a mechanism that encrypts all traffic belonging to an entire TN. Huawei distinguishes TNs as underlay networks and GRE or IPsec VPNs as overlay data channels. Therefore, only A and B are correct.

A-FEC, or Adaptive Forward Error Correction, is the correct technology. It protects delay-sensitive traffic by adding calculated redundant packets to the original packet stream. If some original packets are lost during WAN transmission, the receiving edge device can reconstruct them using the surviving original and redundant packets rather than waiting for end-to-end retransmission.

The key distinction between ordinary FEC and A-FEC is adaptation. With A-FEC, the receiving device reports real-time packet-loss and continuous-loss information to the transmitting device through FEC acknowledgement messages. The transmitting edge then dynamically increases or decreases the redundancy ratio according to actual network conditions. This provides stronger recovery during severe loss while avoiding unnecessary bandwidth overhead when link quality improves. Huawei describes this feedback-controlled adjustment as a mechanism that can alleviate or eliminate the impact of packet loss.

IFIT and IPCA are primarily measurement and service-quality analysis technologies; they do not reconstruct lost video packets. Fixed FEC does not adapt its redundancy level as effectively to changing loss conditions. Therefore, the technology intended for smooth video under packet loss of up to 20% is A-FEC.

==================