Pass the IIBA Certification of Capability in Business Analysis CCBA Questions and answers with ExamsMirror

The BA missed the element of understanding stakeholder roles, which is part of the task of identifying stakeholders in the business analysis planning and monitoring knowledge area. The BA should have identified the roles and responsibilities of the stakeholders, including who has the authority to approve the requirements, before eliciting, specifying, and modelling them. This would have avoided the delay and confusion caused by the wrong sign-off authority. The other options are not relevant to the question, as they are related to different tasks or knowledge areas. References: [A Guide to the Business Analysis Body of Knowledge® (BABOK® Guide)], Chapter 3: BusinessAnalysis Planning and Monitoring, Section 3.1: Plan Stakeholder Engagement, Task 3.1.1: Identify Stakeholders, Page 36. [Business Analysis for Practitioners: A Practice Guide], Chapter 2: Needs Assessment, Section 2.2: Identify Stakeholders, Page 23.

 In the context of the Certification of Capability in Business Analysis™ (CCBA®), when examining and analyzing the relationship between a set of requirements, it is crucial to verify that the requirements are unambiguous. This means ensuring that there is a genuine relationship between the requirements and that the type of relationship is clearly described. The BA should look for clear, well-defined connections that contribute to a coherent understanding of the requirements as a whole.

References: The information is based on the standards and guidelines provided by the International Institute of Business Analysis (IIBA®) in the BABOK® Guide and CCBA® certification resources

The BA should store the requirements package on a secure shared drive that has access control and encryption to protect the sensitive information from unauthorized access or modification. This will ensure that the requirements are available for future reference and can be traced to the solution. Printing the requirements package and distributing it to stakeholders in person may compromise the confidentiality and integrity of the information. Archiving the requirements package in the business analysis portal may not provide adequate security measures for sensitive information. Sending the requirements package to stakeholder in a password protected email may expose the information to interception or hacking. References: [A Guide to the Business Analysis Body of Knowledge® (BABOK® Guide)], Chapter 3: Business Analysis Planning and Monitoring, Section 3.6: Plan Requirements Management Process, Task 3.6.2: Define Requirements Change Process, Page 58. [Business Analysis for Practitioners: A Practice Guide], Chapter 3: Requirements Elicitation and Analysis, Section 3.7: Requirements Traceability, Page 66.

 The process that the BA is completing before selecting a design solution is requirements verification. Requirements verification is the process of ensuring that requirements and designs are complete, correct, consistent, clear, feasible, unambiguous, testable, and conform to standards2. It involves checking whether stakeholder, solution, and transition requirements align to the business requirements and whether the design satisfies the requirements. Requirements verification can help to identify and resolve errors, gaps, or inconsistencies in the requirements and designs before they are implemented. References: 2: BABOK Guide v3, Section 4.6

Item tracking methods are techniques to monitor and control the status of items such as issues, defects, changes, or action items. They help to manage and resolve the outstanding issues that have been logged in an issues register. Requirements documentation, requirements analysis, and metrics and KPIs are not techniques for managing and resolving issues. References: BABOK Guide v3, page 387; CCBA Mock Test, question 13

A process model is a technique that creates a graphical representation of a business process or workflow, showing the sequence of activities, decision points, inputs, outputs, and roles involved. Aprocess model helps to analyze and communicate the current state and the desired future state of a business process, and to identify the gaps, issues, and opportunities for improvement. A process model is useful for standardizing a business process across different locations or units, as it provides a common understanding and a consistent approach for the process.

To prepare for the workshop with all the users, the business analyst should create a process model based on the information gathered from the individual interviews. The process model should capture the current claims intake workflow of the insurance company, and highlight the variations, inefficiencies, and pain points across the different branch offices. The business analyst should use the process model as a basis for facilitating the workshop, and seek feedback and consensus from the users on the process model. The business analyst should also use the workshop as an opportunity to elicit the requirements and the expectations for the standardized claims intake workflow, and to update the process model accordingly.

References: BABOK Guide v3, page 97; CCBA Mock Test, question 3

 The type of diagram that meets the designers’ needs of having a visual that illustrates the type of information that will be input in the system, the processes it will support, and the location where it will be stored is a data flow diagram. A data flow diagram is a graphical representation of the sources, destinations, flows, and processes of data within a system or solution. A data flow diagram can help to understand how data is created, used, stored, and changed by the system or solution.

The other options are incorrect because:

Option A is incorrect because a use case diagram is not a type of diagram that meets the designers’ needs of having a visual that illustrates the type of information that will be input in the system, the processes it will support, and the location where it will be stored, but a type of diagram that shows the actors, use cases, and relationships of a system or solution. A use case diagram can help to define and communicate the functional requirements and scope of the system or solution.

Option C is incorrect because an activity flow diagram is not a type of diagram that meets the designers’ needs of having a visual that illustrates the type of information that will be input in the system, the processes it will support, and the location where it will be stored, but a type of diagram that shows the inputs, outputs, triggers, and outcomes of activities within a system or solution. An activity flow diagram can help to understand how activities are performed and sequenced by the system or solution.

Option D is incorrect because a state model diagram is not a type of diagram that meets the designers’ needs of having a visual that illustrates the type of information that will be input in the system, the processes it will support, and the location where it will be stored, but a typeof diagram that shows the states, transitions, and actions of an entity or an object within a system or solution. A state model diagram can help to understand how an entity or an object changes its state or behavior in response to events or conditions.

References:

BABOK Guide v3, section 10.12: Data Flow Diagrams

CCBA Exam Questions, question 33

This answer is correct because keeping separate records for customers who are also vendors is a duplicate task that can be eliminated by using the new software module. This would improve efficiency and accuracy of data. The other options are not opportunities identified by the BA in this scenario. References: BABOK Guide v3, page 15; CCBA Mock Test, question 9

The modeling format that will show the requirements for both systems side by side when performing a gap analysis between two existing systems to combine into a single system or run just one system is a matrix. A matrix is a table that shows the relationships, dependencies, comparisons, or mappings between two or more sets of data or information. A matrix can help to visualize and analyze the similarities and differences between two systems.

The other options are incorrect because:

Option A is incorrect because an activity flow is not a modeling format that will show the requirements for both systems side by side, but a modeling format that will show the sequence and conditions of activities within a system or solution. An activity flow is a graphical representation of the inputs, outputs, triggers, and outcomes of activities within a system or solution.

Option C is incorrect because a glossary is not a modeling format that will show the requirements for both systems side by side, but a modeling format that will show the definitions and descriptions of terms or concepts within a system or solution. A glossary is a repository that contains the meanings, attributes, formats, and relationships of terms or concepts within a system or solution.

Option D is incorrect because a bubble chart is not a modeling format that will show the requirements for both systems side by side, but a modeling format that will show the distribution and correlation of data points within a system or solution. A bubble chart is a graphical representation of data points that vary in size and position according to their values.

References:

BABOK Guide v3, section 10.16: CRUD Matrix

CCBA Exam Questions, question 25

The BA needs to take into account the size and complexity of the change when deciding how to structure the information. This means that the BA should consider how the change will affect thescope, scale, and interdependencies of the solution and its components. The BA should also consider how the change will impact the stakeholders, their needs, expectations, and preferences. The BA should structure the information in a way that is appropriate, relevant, and understandable for the change.

The other options are incorrect because:

Option A is incorrect because the level of experience with the repository tool is not a factor that the BA needs to take into account when deciding how to structure the information. The repository tool is a tool that enables storing, organizing, and retrieving information. The level of experience with the repository tool may affect how the BA uses the tool, but not how the BA structures the information.

Option B is incorrect because the number of stakeholders to be consulted is not a factor that the BA needs to take into account when deciding how to structure the information. The number of stakeholders to be consulted may affect how the BA elicits, communicates, and manages information, but not how the BA structures the information.

Option D is incorrect because the governance and engagement approach to be used is not a factor that the BA needs to take into account when deciding how to structure the information. The governance and engagement approach to be used may affect how the BA plans, monitors, and controls information, but not how the BA structures the information.

References:

BABOK Guide v3, section 4.5: Requirements Architecture

CCBA Exam Questions, question 17

The purpose of decomposing information into components is to enable discussion regarding solution options. By breaking down complex information into smaller and simpler parts, the business analyst (BA) can facilitate a better understanding of the requirements, the problems, and the potential solutions. Decomposing information also helps the BA to identify dependencies, gaps, overlaps, and conflicts among the components, and to evaluate the feasibility, benefits, and risks of different solution options. Decomposing information can also support other activities, such as planning, testing, and communication, but the primary purpose is to enable discussion regarding solution options.

References: The answer is based on the BABOK® Guide, which is a key resource for the CCBA® certification. Specifically, it relates to the Requirements Analysis and Design Definition knowledge area, where decomposing information is one of the techniques that can be used by the BA12. It also relates to the Elicitation and Collaboration knowledge area, where decomposing information can be used to confirm elicitation results13. Additionally, the answer is supported by the web search results from the tool invocation, which provide more information and examples of decomposing information45.

 The correct answer is C. The BA should document the elicitation results then verify and validate in a requirements review. This means that the BA should record the process model for the exception scenario and check its accuracy, completeness, and clarity with the domain SME and other stakeholders. The BA should also ensure that the process model meets the stakeholder needs and expectations and conforms to the business analysis standards and guidelines.

The other options are incorrect because:

Option A is incorrect because capturing and integrating the process model into other appropriate planned outcomes is not an action that the BA takes immediately after sketching out the process model with the domain SME. The BA should first document and review the process model before incorporating it into other deliverables or artifacts.

Option B is incorrect because planning an observation activity to gain a hands-on understanding of the situation is not an action that the BA takes after sketching out the process model with the domain SME. The BA should already have a sufficient understanding of the situation before eliciting information from the domain SME. Observation is another elicitation technique that can be used to gather information from stakeholders by watching them perform their tasks or roles.

Option D is incorrect because reviewing the issue with stakeholders during a follow-up session is not an action that the BA takes immediately after sketching out the process model with the domain SME. The BA should first document and review the process model before conducting a follow-up session with stakeholders to address any issues or concerns.

References:

BABOK Guide v3, section 4.2: Elicitation

CCBA Exam Questions, question 10

According to the BABOK Guide, a data flow diagram is a tool that shows how data moves through a system or process3. A data flow diagram can help the BA determine how information is input, processed, stored, and extracted from a collection of systems, as it depicts the sources and destinations of data, the transformations and storage of data, and the flow of data between systems or processes. Therefore, the correct answer is D. References: BABOK Guide, [CCBA Mock Test]

 A business analysis information package is a collection of information that summarizes the results of business analysis activities. It helps to organize and present the scanned notes, documents, andphotos of whiteboards in a coherent and consistent manner. Meeting with stakeholders or users, or managing stakeholder collaboration are possible next steps after developing the package. References: BABOK Guide v3, page 387; CCBA Mock Test, question 5

The first activity that the BA should perform to understand the effect of the proposed change is to determine whether the additional requirement is traceable to a need. This will help to assess the value and relevance of the requirement, and whether it aligns with the project scope and objectives. Determining stakeholder availability, consulting with the technical team, and checking with the project manager are possible subsequent activities, but not the first one. References: BABOK Guide v3, page 160; CCBA Mock Test, question 12