Pass the Juniper JNCIS-MistAI JN0-452 Questions and answers with ExamsMirror

 According to the Data Rates - Mist document1, a honeypot AP is an AP that is not associated with your network, but broadcasts your corporate login page and WLAN name. This is a type of rogue AP that tries to trick users into connecting to it and revealing their credentials or other sensitive information.

In a traditional deployment, aJuniper Mist Access Pointis a "cloud-first" device, meaning it expects a constant connection to the Mist Cloud to receive configuration updates and report telemetry. When performing an "AP-on-a-Stick" (APoS) site survey, the AP is often powered by a battery pack and moved to various locations where an active Ethernet backhaul or Internet connection is unavailable.3To ensure the AP continues to broadcast the required SSIDs for signal measurement in this "disconnected" state, two specific settings must be adjusted within the Mist dashboard.

First,AP Config Persistencemust be enabled. By default, Mist APs store their configuration in volatile memory; if an AP reboots (which happens when switching battery packs or moving locations) and cannot reach the Mist Cloud, it may fail to reload its previous configuration. Enabling Config Persistence ensures that the AP writes its current configuration to non-volatile flash memory, allowing it to boot up and start broadcasting the programmed SSIDs even in the absence of a cloud connection.4

Second,AP Uplink Monitoringmust be disabled. Mist APs are designed with a safety mechanism where, if the AP loses its gateway connectivity (eth0 link or ping to the gateway), it will stop broadcasting SSIDs to prevent "black-holing" client traffic. In a site survey scenario, the Ethernet port is typically connected only to a battery or a passive PoE injector with no data path.5If Uplink Monitoring remains active, the AP will detect the lack of a backhaul and disable its radios, making the survey impossible. By disabling this feature, the AP is forced to keep its radios active regardless of the uplink status. Together, these two settings allow the AP to function as a standalone signal source, which is essential for accurate RF environment mapping and pre-deployment validation using Mist AI hardware.

If a customer wants to broadcast a WLAN at a certain time and day of the week, SSID scheduling should be configured

According to the SSID Scheduling - Mist document1, SSID scheduling is a feature that allows you to customize your WLAN by choosing the exact days and times to broadcast the SSID. This feature can be useful for scenarios where you want to limit the availability of a WLAN to a certain time and day of the week.

According to the Location - how it works - Mist document1, a Mist AP actually begins transmitting BLE when it is placed on a floor plan. This is because the Mist cloud uses the floor plan information to calculate the optimal BLE transmission pattern for each AP.

According to the JNCIS-MistAI Certification page2, two Mist APs that would be used for BLE location are AP33 and AP43. These are the only two models that support vBLE array technology, which enables accurate location services without physical beacons.

According to the Juniper Mist Wireless Deployment Service Datasheet1, a configuration template at the organization level can be applied to a site group, not to an individual site. Therefore, there is no option to mention the site in the config template at the organization level.