Pass the Nutanix Certified Associate (NCA) NCA-6.10 Questions and answers with ExamsMirror

To create a VM-VM Anti-Affinity Policy ensuring VMs are not placed on the same hypervisor,Prism Centralis required. Anti-affinity policies are cluster-wide configurations managed through Prism Central’s policy-based interface, enabling placement rules to distribute workloads effectively.

Steps:

Navigate toPrism Central > Policies.

Create a new Anti-Affinity Policy.

Select the VMs and configure the policy to ensure separation.

To prevent password access to the CVM for both thenutanixandadminuser accounts,Cluster Lockdownshould be enabled. Cluster Lockdown restricts SSH access to the Controller VM (CVM), effectively disabling password-based logins for enhanced security. Access is then managed through more secure means, such as console access or specific tools like Nutanix Support.

A. Cluster Lockdown:Correct, as this prevents SSH-based access to the CVM.

B. STIG:Incorrect, as STIG (Security Technical Implementation Guide) focuses on broader compliance measures.

C. RBAC Policy on PC:Incorrect, as RBAC (Role-Based Access Control) controls Prism Central permissions, not CVM access.

D. Data-at-Rest Encryption:Incorrect, as this secures stored data, not access credentials.

The correct answer isB. Create an RF1 storage container.

In Nutanix architecture,Replication Factor (RF)is set at thestorage container levelto optimize redundancy and performance for specific workloads. When an application hasits own internal redundancy, such as database clustering or distributed file systems, the administrator may choose toreduce Nutanix’s redundancy to RF1, which stores onlyone copy of datain the cluster. This reduces overhead and maximizes usable capacity, but isnot fault-tolerantat the Nutanix level.

Key clarifications:

RF1 is not enabled by default.Nutanix clusters default toRF2 or RF3depending on the configuration and number of nodes.

RF1 must beexplicitly setwhen creating a storage container.

There isno separate "enable RF1"setting outside of selecting RF1 at container creation; once selected, it applies directly.

Prism UI Navigation Path:

Storage > Storage Containers > Create Storage Container > Data Redundancy Level → Select "RF1"

Official Reference:

Nutanix Bible – Storage Layer and RF Explanation

Nutanix Storage Administration Guide – "Creating Containers with Specific Replication Factor"

Excerpt: "RF1 is typically used for workloads with native redundancy. It must be selected explicitly during container creation."

Conclusion:Onlyoption Baccurately reflects this process.

Answer: B

The correct answer isB. Run Nutanix Cluster Check (NCC).

Before performingany upgrade procedure(AOS, Foundation, LCM, etc.), it is strongly recommended torun the Nutanix Cluster Check (NCC). This tool performs acomprehensive health assessmentof the cluster and validates its readiness for the upgrade, including:

Disk integrity

Network configuration

CVM health

Cluster services status

Prism UI Navigation Path:

Health > Run NCC Check (via Actions menu)

Command Line Alternative:

bash

CopyEdit

ncc health_checks run_all

Clarifications:

A (Put hosts into maintenance mode): Not required before upgrades; LCM handles host management automatically.

C (Put CVMs into maintenance mode): Not correct. CVMs must be operational during upgrades.

D (Clear all alerts): Irrelevant unless the alerts indicate upgrade-blocking issues, which NCC identifies.

Official Reference:

Nutanix Upgrade Guide – Pre-upgrade Checklist Section

Excerpt: “It is strongly recommended to run NCC prior to starting the upgrade process to detect any cluster issues.”

Answer: B

The correct answer isC. Mount and install the VirtIO drivers.

When installingWindows OSon aNutanix AHV VM, the default virtual disk controller uses theVirtIO interface, which isnot natively supported by Windows installation media. As a result, during the OS installation, the virtual disk will not appear unless theVirtIO drivers are manually provided.

Required Steps:

Attach theVirtIO ISOto the VM.

During the Windows installation, click“Load Driver”.

Browse to the mountedVirtIO ISOand select the appropriate storage driver.

Once loaded, the installer will detect the virtual disk.

Clarifications:

A (Add a second disk):Irrelevant; the issue is driver recognition, not disk quantity.

B (Enable Turbo Mode):Related to performance, not disk detection.

D (Install Nutanix Guest Tools):Doneafter OS installation, not before or during.

Prism UI Navigation Path:

VM > Edit > CD-ROM > Mount ISO → Select VirtIO ISO

Official Reference:

Nutanix AHV Administration Guide – Creating Windows VMs

Nutanix KB #5967 – AHV: Windows Installation on VirtIO

Excerpt: “If the disk is not detected during Windows installation, the VirtIO ISO must be mounted and the appropriate storage controller driver manually installed.”

TheRecycle Binin Nutanix clusters temporarily stores deleted VMs for 24 hours, allowing administrators to recover them if needed. This feature helps protect against accidental deletions by providing a grace period for recovery before permanent deletion occurs.

A. Stores the OpLog's most recent deleted data in case of a CVM failure:Incorrect, as the OpLog pertains to write operations, not VM deletion.

B. Keeps deleted VMs for 24 hours for recovery:Correct, as the Recycle Bin's purpose is temporary VM recovery.

C. Allows administrators to undo the last five actions:Incorrect, as there is no such feature for undoing multiple actions in Prism.

D. Centralizes the deleted data from the different VMs in the cluster:Incorrect, as the Recycle Bin is specifically for deleted VMs, not generalized data centralization.

The correct answer isB. Internal NTP sources.

Nutanix strongly recommends configuringreliable internal NTP sources(e.g., enterprise-managed NTP servers or domain NTP servers) to ensure:

Time consistency across all nodes and CVMs

Accurate logging, monitoring, authentication (e.g., Kerberos), and cluster operations

Avoiding dependency onexternal/public NTPsources, which may berate-limited, unavailable, or blockedby firewalls

Clarifications:

A (Windows time sources):Generally discouraged unless they are configured to use a stratum 1/2 reliable upstream source.

C (Rate-limited sources):Not recommended; can result in dropped or inconsistent time updates.

D (External ISP NTP):Not preferred for production clusters due to reliability concerns.

Prism UI Navigation Path:

Settings > NTP Servers

Official Reference:

Nutanix Best Practices Guide – NTP Configuration

Excerpt: “Use reliable and consistent internal NTP servers for all Nutanix clusters to maintain time synchronization.”

Answer: B

To enable Windows Defender Credential Guard, the VM must be configured withUEFI(Unified Extensible Firmware Interface) instead of Legacy BIOS. UEFI provides the necessary support for Secure Boot and Virtualization-Based Security (VBS), both of which are prerequisites for Credential Guard.

Steps:

When creating or editing the VM, selectUEFIas the firmware type.

Ensure Secure Boot and VBS are enabled in the OS configuration.

To create a VM template from an existing VM in Nutanix, the VM must be powered off. This ensures that the template is consistent and does not include any transient data or activity from the VM. Once the VM is powered off, the administrator can use the Prism UI to take a snapshot and designate it as a template.

A. Sysprep or Cloud-init script:These are optional for post-deployment configuration, not mandatory for creating a template.

B. The VM is powered on:This is incorrect, as the VM must be powered off.

C. Windows OS is installed:The OS type is irrelevant for creating a template.

D. The VM is powered off:Correct, as creating a template requires the VM to be in a powered-off state.

TheNutanix Moveutility is specifically designed for migrating VMs between hypervisors, including from ESXi to AHV. It automates the migration process while ensuring minimal downtime. Nutanix Move supports pre-migration assessments and automates data transfer and VM configuration for AHV.

A. Move:Correct, as it is the Nutanix tool for hypervisor migrations.

B. acli:Incorrect, as acli is used for command-line configuration and management within AHV, not migration.

C. Flow:Incorrect, as Nutanix Flow focuses on network security and micro-segmentation.

D. Ncli:Incorrect, as Ncli is a command-line utility for cluster management, not migration.