Pass the RedHat Red Hat Certified Architect (RHCA) EX407 Questions and answers with ExamsMirror

Using the Simulation Program, perform the following tasks:

Static Inventories Task:

1. Add a new group to your default ansible host file. call the group [ec2]

2. Add a new host to the new group you created.

3. Add a variable to a new host entry in the /etc/ansible/hosts file. Add the following. localhost http_port=80 maxRequestsPerChild=808

4. Check to see if maxRequestsPerChild is pulled out with an ad-hoc command.

5. Create a local host file and put a target group and then a host into it. Then ping it with an ad-hoc command.

Create a file called requirements.yml in /home/sandy/ansible/roles a file called role.yml in /home/sandy/ansible/. The haproxy-role should be used on the proxy host. And when you curl http://node3.example.com it should display "Welcome to node4.example.com" and when you curl again "Welcome to node5.example.com" The php-role should be used on the prod host.

Create a file called adhoc.sh in /home/sandy/ansible which will use adhoc commands to set up a new repository. The name of the repo will be 'EPEL' the description 'RHEL8' the baseurl is 'https://dl.fedoraproject.org/pub/epel/epel -release-latest-8.noarch.rmp' there is no gpgcheck, but you should enable the repo.

* You should be able to use an bash script using adhoc commands to enable repos. Depending on your lab setup, you may need to make this repo "state=absent" after you pass this task.

Create a file called mysecret.yml on the control host using ansible vault in home/bob/ansible. Set the password to 'notasafepass' and inside the file create a variable called dev_pass with the value of devops. Save the file. Then go back in the file and change dev_pass value to devops123. Then change the vault password of mysecret.yml to verysafepass

Create a playbook called webdev.yml in 'home/sandy/ansible. The playbook will create a directory Avcbdev on dev host. The permission of the directory are 2755 and owner is webdev. Create a symbolic link from /Webdev to /var/www/html/webdev. Serve a file from Avebdev7index.html which displays the text "Development" Curl http://nod e1.example.com/webdev/index.html to test

Create a jinja template in /home/sandy/ansible/ and name it hosts.j2. Edit this file so it looks like the one below. The order of the nodes doesn't matter. Then create a playbook in /home/sandy/ansible called hosts.yml and install the template on dev node at /root/myhosts

Using the Simulation Program, perform the following tasks:

Ad-Hoc Ansible Commands (Number Two) Task:

1. Use the ad-hoc command to make sure php is installed.

2. Use the ad-hoc command to make sure that php is installed and is the latest version.

3. Use the ad-hoc command to make sure that httpd is installed.

4. Use the ad-hoc command to remove httpd from the servers.

===================================================================================

control.realmX.example.com _ workstation.lab.example.com

node1.realmX.example.com _ servera.lab.example.com

node2.realmX.example.com _ serverb.lab.example.com

node3.realmX.example.com _ serverc.lab.example.com

node4.realmX.example.com _ serverd.lab.example.com

node5.realmX.example.com

- username:root, password:redhat

- username:admin, password:redhat

note1. don’t change ‘root’ or ‘admin’ password.

note2. no need to create ssh-keygen for access, its pre-defined

note3. SELinux is in enforcing mode and firewalld is disabled/stop on whole managed hosts.

===================================================================================

Create user accounts

------------------------

--> A list of users to be created can be found in the file called user_list.yml

which you should download from http://classroom.example.com/user_list.yml and

save to /home/admin/ansible/

--> Using the password vault created elsewhere in this exam, create a playbook called

create_user.yml

that creates user accounts as follows:

--> Users with a job description of developer should be:

--> created on managed nodes in the "dev" and "test" host groups assigned the

password from the "dev_pass"

variable and these user should be member of supplementary group "devops".

--> Users with a job description of manager should be:

--> created on managed nodes in the "prod" host group assigned the password from

the "mgr_pass" variable

and these user should be member of supplementary group "opsmgr"

--> Passwords should use the "SHA512" hash format. Your playbook should work using

the vault password file

created elsewhere in this exam.

while practising you to create these file hear. But in exam have to download as per

questation.

user_list.yml file consist:

---

user:

- name: user1

job: developer

- name: user2

job: manager

Install and configure ansible

User sandy has been created on your control node with the appropriate permissions already, do not change or modify ssh keys. Install the necessary packages to run ansible on the control node. Configure ansible.cfg to be in folder /home/sandy/ansible/ansible.cfg and configure to access remote machines via the sandy user. All roles should be in the path /home/sandy/ansible/roles. The inventory path should be in /home/sandy/ansible/invenlory.

You will have access to 5 nodes.

node1.example.com

node2.example.com

node3.example.com

node4.example.com

node5.example.com

Configure these nodes to be in an inventory file where node I is a member of group dev. nodc2 is a member of group test, node3 is a member of group proxy, nodc4 and node 5 are members of group prod. Also, prod is a member of group webservers.

Create a playbook called issue.yml in /home/sandy/ansible which changes the file /etc/issue on all managed nodes: If host is a member of (lev then write "Development" If host is a member of test then write "Test" If host is a member of prod then write "Production"