Pass the Splunk Enterprise Certified Architect SPLK-2002 Questions and answers with ExamsMirror

 A multi-site indexer cluster can be configured by directly editing SPLUNK_HOME/etc/system/local/server.conf or running a splunk edit cluster-config command from the CLI. These methods allow the administrator to specify the site attribute for each indexer node and the site_replication_factor and site_search_factor for the cluster. Configuring a multi-site indexer cluster via Splunk Web or directly editing SPLUNK_HOME/etc/system/default/server.conf are not supported methods. For more information, see Configure the indexer cluster with server.conf in the Splunk documentation.

Splunk configuration files are files that contain settings that control various aspects of Splunk behavior, such as data inputs, outputs, indexing, searching, clustering, and so on1. Troubleshooting Splunk configuration files involves identifying and resolving issues that affect the functionality or performance of Splunk due to incorrect or conflicting configuration settings. Some of the tools and methods that can help with troubleshooting Splunk configuration files are:

search.log: This is a file that contains detailed information about the execution of a search, such as the search pipeline, the search commands, the search results, the search errors, and the search performance2. This file can help troubleshoot issues related to search configuration, such as props.conf, transforms.conf, macros.conf, and so on3.

btool output: This is a command-line tool that displays the effective configuration settings for a given Splunk component, such as inputs, outputs, indexes, props, and so on4. This tool can help troubleshoot issues related to configuration precedence, inheritance, and merging, as well as identify the source of a configuration setting5.

diagnostic logs: These are files that contain information about the Splunk system, such as the Splunk version, the operating system, the hardware, the license, the indexes, the apps, the users, the roles, the permissions, the configuration files, the log files, and the metrics6. These files can help troubleshoot issues related to Splunk installation, deployment, performance, and health7.

Option A is the correct answer because crash logs are the least helpful in troubleshooting Splunk configuration files. Crash logs are files that contain information about the Splunk process when it crashes, such as the stack trace, the memory dump, and the environment variables8. These files can help troubleshoot issues related to Splunk stability, reliability, and security, but not necessarily related to Splunk configuration9.

References:

1: About configuration files - Splunk Documentation 2: Use the search.log file - Splunk Documentation 3: Troubleshoot search-time field extraction - Splunk Documentation 4: Use btool to troubleshoot configurations - Splunk Documentation 5: Troubleshoot configuration issues - Splunk Documentation 6: About the diagnostic utility - Splunk Documentation 7: Use the diagnostic utility - Splunk Documentation 8: About crash logs - Splunk Documentation 9: [Troubleshoot Splunk Enterprise crashes - Splunk Documentation]

 In a distributed environment, knowledge object bundles are replicated from the search head to the SPLUNK_HOME/var/run/searchpeers directory on the search peer(s). A knowledge object bundle is a compressed file that contains the knowledge objects, such as fields, lookups, macros, and tags, that are required for a search. A search peer is a Splunk instance that provides data to a search head in a distributed search. A search head is a Splunk instance that coordinates and executes a search across multiple search peers. When a search head initiates a search, it creates a knowledge object bundle and replicates it to the search peers that are involved in the search. The search peers store the knowledge object bundle in the SPLUNK_HOME/var/run/searchpeers directory, which is a temporary directory that is cleared when the Splunk service restarts. The search peers use the knowledge object bundle to apply the knowledge objects to the data and return the results to the search head. The SPLUNK_HOME/var/lib/searchpeers, SPLUNK_HOME/var/log/searchpeers, and SPLUNK_HOME/var/spool/searchpeers directories are not the locations where the knowledge object bundles are replicated, because they do not exist in the Splunk file system

The deployer distributes apps and non-search related and manual configuration file changes to the search head cluster members. The deployer does not bootstrap a clean Splunk install for a search head cluster, as this is done by the captain. The deployer also does not distribute runtime knowledge object changes made by users across the search head cluster, as this is done by the replication factor. For more information, see Use the deployer to distribute apps and configuration updates in the Splunk documentation.

 The logical first step when starting a deployment plan is to collect the initial requirements for the deployment from all stakeholders. This includes identifying the business objectives, the data sources, the use cases, the security and compliance needs, the scalability and availability expectations, and the budget and timeline constraints. Collecting the initial requirements helps to define the scope and the goals of the deployment, and to align the expectations of all the parties involved.

Inventorying the currently deployed logging infrastructure, determining what apps and use cases will be implemented, and gathering statistics on the expected adoption of Splunk for sizing are all important steps in the deployment planning process, but they are not the logical first step. These steps can be done after collecting the initial requirements, as they depend on the information gathered from the stakeholders.

The telnet and tcpdump tools can be leveraged to diagnose connection problems between an indexer and forwarder. The telnet tool can be used to test the connectivity and port availability between the indexer and forwarder. The tcpdump tool can be used to capture and analyze the network traffic between the indexer and forwarder. The splunk btool command can be used to check the configuration files of the indexer and forwarder, but it cannot diagnose the connection problems. The splunk btprobe command does not exist, and it is not a valid tool.

 The AggregatorMiningProcessor component in the splunkd.log file will log information related to bad event breaking. The AggregatorMiningProcessor is responsible for breaking the incoming data into events and applying the props.conf settings. If there is a problem with the event breaking, such as incorrect timestamps, missing events, or merged events, the AggregatorMiningProcessor will log the error or warning messages in the splunkd.log file. The Audittrail component logs information about the audit events, such as user actions, configuration changes, and search activity. The EventBreaking component logs information about the event breaking rules, such as the LINE_BREAKER and SHOULD_LINEMERGE settings. The IndexingPipeline component logs information about the indexing pipeline, such as the parsing, routing, and indexing phases. For more information, see About Splunk Enterprise logging and [Configure event line breaking] in the Splunk documentation.

The correct action to take first if a deployment client is not updating apps is to choose a corrective action based on the splunkd.log of the deployment client. This log file contains information about the communication between the deployment server and the deployment client, and it can help identify the root cause of the problem1. The other actions may or may not help, depending on the situation, but they are not the first steps to take. Choosing a longer phone home interval may reduce the load on the deployment server, but it will also delay the updates for the deployment clients2. Increasing the number of CPU cores or the amount of memory for the deployment server may improve its performance, but it will not fix the issue if the problem is on the deployment client side3. Therefore, option C is the correct answer, and options A, B, and D are incorrect.

1: Troubleshoot deployment server issues 2: Configure deployment clients 3: Hardware and software requirements for the deployment server

The correct answer is A. Change frozenTimePeriodInSecs to a larger value. This is a possible solution to reduce the need to thaw buckets, as it increases the time period before a bucket is frozen and removed from the index1. The frozenTimePeriodInSecs attribute specifies the maximum age, in seconds, of the data that the index can contain1. By setting it to a larger value, the Splunk administrator can keep the data in the index for a longer time, and avoid having to thaw the buckets frequently. The other options are not effective solutions to reduce the need to thaw buckets. Option B, changing maxTotalDataSizeMB to a smaller value, would actually increase the need to thaw buckets, as it decreases the maximum size, in megabytes, of an index2. This means that the index would reach its size limit faster, and more buckets would be frozen and removed. Option C, changing maxHotSpanSecs to a larger value, would not affect the need to thaw buckets, as it only changes the maximum lifetime, in seconds, of a hot bucket3. This means that the hot bucket would stay hot for a longer time, but it would not prevent the bucket from being frozen eventually. Option D, changing coldToFrozenDir to a different location, would not reduce the need to thaw buckets, as it only changes the destination directory for the frozen buckets4. This means that the buckets would still be frozen and removed from the index, but they would be stored in a different location. Therefore, option A is the correct answer, and options B, C, and D are incorrect.

1: Set a retirement and archiving policy 2: Configure index size 3: Bucket rotation and retention 4: Archive indexed data

The Indexer Discovery feature enables forwarders to dynamically connect to the available peer nodes in an indexer cluster. To use this feature, the manager node must be configured with the [indexer_discovery] stanza and a pass4SymmKey value. The forwarders must also be configured with the same pass4SymmKey value and the master_uri of the manager node. The pass4SymmKey value must be encrypted using the splunk _encrypt command. Therefore, option A indicates that the Indexer Discovery feature has not been fully configured on the manager node, because the pass4SymmKey value is not encrypted. The other options are not related to the Indexer Discovery feature. Option B shows the configuration of a forwarder that is part of an indexer cluster. Option C shows the configuration of a manager node that is part of an indexer cluster. Option D shows an invalid configuration of the [indexer_discovery] stanza, because the pass4SymmKey value is not encrypted and does not match the forwarders’ pass4SymmKey value12

1: https://docs.splunk.com/Documentation/Splunk/9.1.2/Indexer/indexerdiscovery  2: https://docs.splunk.com/Documentation/Splunk/9.1.2/Security/Secureyourconfigurationfiles#Encrypt_the_pass4SymmKey_setting_in_server.conf