Weekend Special Limited Time 70% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code = simple70

Pass the VMware SD-WAN Troubleshoot 2021 5V0-41.20 Questions and answers with ExamsMirror

Practice at least 50% of the questions to maximize your chances of passing.
Exam 5V0-41.20 Premium Access

View all detail and faqs for the 5V0-41.20 exam


517 Students Passed

84% Average Score

92% Same Questions
Viewing page 1 out of 1 pages
Viewing questions 1-10 out of questions
Questions # 1:

Scenario 1:

The Dallas Branch location is having issues getting activated. The local network administrator is aware that the Edge device received a DHCP address and was able to connect to the internet. The Orchestrator is reporting the Edge as Down. No other changes were made post activation.

A network administrator is tasked with enabling SD-WAN at three branch locations. A topology has been provided for reference. For each site, the administrator is having issues bringing edges

online, as another administrator has gone ahead and created a configuration ahead of time. The organization has several branch sites. One is am Internet-only site and two are Hybrid locations with both internet and MPLS. The last location is MPLS only. There are hub data center locations in this environment as well. Please refer to the topology.

Refer to the Exhibit(s).

Question # 1

Question # 1

What is the cause of this issue?

Options:

A.

The activation link did not specify the updated image location requiring the Edge to be re-activated.

B.

The activation link did not contain any post-activation configuration to allow the Orchestrator to communicate with the Edge.

C.

The Edge will be offline for about 4 hours until it has completed the factory image installation.

D.

The activation link contained incorrect configurations for WAN overlays and WAN interfaces.

Questions # 2:

Scenario 1:

A network administrator is tasked with enabling SD-WAN at three branch locations. A topology has been provided for reference. For each site, the administrator is having issues bringing edges online, as another administrator has gone ahead and created a configuration ahead of time. The organization has several branch sites. One is an Internet-only site and two are Hybrid locations with both internet and MPLS. The last location is MPLS only. There are hub data center locations in this environment as well. Please refer to the topology.

Exhibit.

Question # 2

Question # 2

The network administrator determines the issue preventing the Dallas Branch from coming online.

Refer to the Exhibit(s).

What must the administrator do for the Edge to communicate with the Orchestrator and other branches?

Options:

A.

Reverse the WAN Overlay configurations

B.

Update the Orchestrator to the latest version as it enables "Auto WAN Swapping"

C.

Delete the User Defined WAN Overlays as the Orchestrator will discover these automatically on MPLS and Internet

D.

Create a User-defined WAN Overlay to bond both interfaces

Questions # 3:

Scenario 3:

After resolving numerous connectivity Issues throughout the various branch sites, connectivity between applications and users is finally present- The network administrator is informed (hat during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.

Exhibit.

Question # 3

Which metrics can a network administrator verify in the QoE screen to determine the overall health of Underlay and Overlay?

Options:

A.

Jitter Packet Loss, Speed.

B.

Jitter, Packet Loss, Latency.

C.

Jitter, Speed, Latency.

D.

Packet Loss, Latency, Speed.

Questions # 4:

Scenario 2:

After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot gel to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.

Exhibit.

Question # 4

A business policy is created and saved.

How can the network administrator verify the business policy is working?

Options:

A.

Select a VCE > Test & Troubleshoot > Remote diagnostics and select List Active flows and check the flows to see what Business policy is applied under the Business policy column.

B.

Executing Route table dump under VCE > Test St Troubleshoot > Remote Diagnostics and select Route Table dump and look for business policy applied in the Route table Dump stats.

C.

Check under Monitor > Applications tab and check the listing of applications at the bottom of the screen

and the category of the type of traffic there.

D.

Check under the Monitor > Business Priority tab for Business policy statistics.

Questions # 5:

Scenario 3:

After resolving numerous connectivity issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected lo. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.

Exhibit.

Question # 5

Users are complaining that web pages to certain web sites are very slow to load and at times unresponsive. The network administrator has verified that the traffic is going correctly out the underlay.

What should the administrator check next?

Options:

A.

Verify if Path-MTU Discovery is disabled.

B.

Verify if there is latency, loss, or jitter on the underlay.

C.

Verify the Business Policy flows are matching.

D.

Verify if routes to Gateways are present in the Overlay Flow Control (OFC).

Questions # 6:

Scenario 3:

After resolving numerous connectivity issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing; internal and external applications.

Exhibit.

Question # 6

A network administrator is configuring several branches to prefer a single prefix, 10.20.11.0/24, from the Seattle hub over the New York hub for various application performance reasons.

What are two effective ways the administrator can accomplish this? (Choose two.)

Options:

A.

Modify the AS Path in New York to be shorter for 10.20.11.0/24.

B.

In the hub preferred order in the profile, set the Seattle hub to be preferred over New York.

C.

Modify the AS Path in New York to be longer for 10.20.11.0/24.

D.

In the OFC 10.20.11.0/24, modify the preferred exit point to be Seattle and pin the route.

Questions # 7:

Scenario 2:

After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.

Exhibit.

Question # 7

A network administrator has received an email from the applications development team requesting connectivity to their AWS VPC.

The administrator has configured the tunnel via the VMware SD-WAN Gateway. The tunnel status icon has not turned green.

Where are two places the administrator must check? (Choose two.)

Options:

A.

Determine if the DH parameter on the Edge has been configured.

B.

Determine if the PSK is mismatched between the AWS side and the VeloCloud Edge.

C.

Determine if the NVS has been enabled and assigned to a profile.

D.

Determine if the PSK is mismatched between the AWS side and the VeloCloud Gateway.

Questions # 8:

Scenario 2:

After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.

Exhibit.

Question # 8

Users at the London site are complaining of various intermittent issues around websites not loading, or applications being remotely accessed disconnecting sporadically and reconnecting after a few minutes. The network administrator does not see anything strange on the Edge overview page and decides to check if the CPU or memory have been hitting close to 100°/o.

Where should the administrator verify this information?

Options:

A.

In the VCO > Test 8c Troubleshoot > Remote Diagnostics > System Status

B.

In the VCO > Monitor > Click London_Site01 > Click the System Tab

C.

In the VCO > Remote Troubleshooting > Remote Actions > System Status

D.

In the VCO > Monitor > Alerts

Questions # 9:

Scenario 2:

After completing the branch activation activities for all required branches, the administrator attempts to test connectivity between the various branches and between the hubs and branches- The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.

Exhibit.

Question # 9

The tunnel from the Dallas site to the Seattle hub is not coming up.

What are two things that should be checked to determine the issue? (Choose two.)

Options:

A.

Hub WAN Interface might be behind a firewall.

B.

Spoke Edge and Hub Edge have a mismatched certificate.

C.

Dynamic Branch to Branch is not enabled.

D.

Spoke Edge and Hub Edge are two different Edge models.

Questions # 10:

Scenario 3:

After resolving numerous connectivity issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.

Exhibit.

Question # 10

Users at a remote office are complaining about poor performance with certain applications. The network administrator has already configured Business Policies based on these requirements.

What is the sequence of parameters that the administrator can check to troubleshoot this problem? (Choose two.)

Options:

A.

Change the bandwidth measurement under WAN Overlay Advanced Settings.

B.

Check underlay network (bandwidth, latency, jitter, packet loss).

C.

Under Monitor, check Routing tab.

D.

Review Business Policies configuration and match them against the business requirements.

Viewing page 1 out of 1 pages
Viewing questions 1-10 out of questions
TOP CODES

TOP CODES

Top selling exam codes in the certification world, popular, in demand and updated to help you pass on the first try.