Pass the AHA-CC CHFM Questions and answers with ExamsMirror

Under the ADA Accessibility Guidelines (ADAAG), room identification signs must include raised tactile characters and Braille. These apply to permanent spaces such as patient rooms, restrooms, and offices.

C. room identification (Correct): Required by ADA to have tactile and Braille.

A. directional: May use visual characters only; Braille is not required.

B. informational: Same as directional, not required to have Braille.

D. mechanical spaces: These areas are typically staff-only; signs do not require tactile or Braille by ADA standards.

Benchmarking is the structured process of setting a reference standard (internal or external) and comparing an organization’s processes, outputs, or outcomes against that standard to identify performance gaps and opportunities for improvement. In CHFM practice, benchmarking supports administrative decision-making for staffing, service levels, utility performance, and cost metrics by aligning results to recognized peer or industry standards.

Federal and accreditor requirements establish two emergency exercises per year for hospitals: one full-scale community-based (or facility-based if community-based is not available) and a second exercise (which may be a second full-scale or an exercise such as a tabletop). Real events may be used to meet one of the required exercises when criteria are met.

Replacement of major building systems (e.g., chillers, boilers, roofs) falls under capital expenditures because these items are large, non-recurring, and add to or extend the life of facility assets. The capital budget accounts for these costs, which are not part of the day-to-day operations budget.

Correct: Capital budget (A) – Covers replacement of major equipment and infrastructure.

Incorrect:

B. Project fund – May finance special projects but not part of standard budgeting categories.

C. Depreciation fund – An accounting mechanism, not typically a direct budget line for replacement.

D. Operating budget – Covers recurring expenses like utilities, maintenance, and repairs, not full replacements.

The RCRA (1976) governs the proper management of hazardous waste from generation to disposal (“cradle to grave”). While healthcare organizations often think of sharps or medical waste, RCRA is broader, addressing hazardous chemicals, solvents, and pharmaceuticals. Medical waste is regulated under other federal and state rules.

Written fire procedures must include the method for promptly notifying the fire department or emergency response agency, ensuring immediate response to protect life and property. Evacuation routes and equipment locations are important operational elements, but the mandatory code requirement is a defined notification procedure.

Overage = 140 cu. ft.

Each small cylinder = 25 cu. ft.

140 ÷ 25 = 5.6 → minimum 6 needed if rounding up. However, since the question asks for the minimum number to remove to get below the limit, removing 5 cylinders = 125 cu. ft. would still leave 15 cu. ft. over the limit. Therefore, 6 cylinders must be removed.

Correct answer = C (6), not B.

The Utilities Management standard under The Joint Commission’s Environment of Care requires healthcare organizations to manage utility systems—including water supply systems—to reduce the risk of healthcare-associated infections caused by waterborne pathogens such as Legionella. This includes monitoring, maintenance, and water management programs.

B: Safety Management deals with physical and occupational safety.

C: Medical Equipment Management relates to device safety and maintenance.

D: Hazardous Materials and Waste Management applies to chemical and biological waste handling, not waterborne pathogens.

Submittals and shop drawings are specifically reviewed to ensure compliance with the design intent, plans, and specifications prepared by the architect/engineer. Code compliance is established during design and permitting, while minimizing change orders or ensuring contractor understanding are indirect benefits.

NFPA 70 (NEC) Article 110.26(A)(1) establishes the depth of working space in front of electrical equipment. For systems 0–150 volts to ground, the minimum depth is 3 ft (36 in.); for 151–600 volts, the required depth is 3–4 ft depending on the condition (exposed live parts and grounded surfaces). In healthcare facilities, unless a more stringent “condition” applies, the baseline minimum clearance encountered for 600 V or less is 36 inches.