Pass the APICS CPIM CPIM-8.0 Questions and answers with ExamsMirror

Poka-yoke is a Japanese term that means “mistake-proofing”. It is a lean tool that aims to eliminate errors and defects by designing processes or products in such a way that mistakes are either prevented or detected and corrected immediately. Poka-yoke can be applied in various ways, such as using sensors, guides, checklists, alarms, or color-coding, to ensure that the process or product meets the quality standards and customer expectations. One of the benefits of integrating poka-yoke into the production process is that it can be used to prevent defects, which can result in lower costs, higher customer satisfaction, and improved productivity. By avoiding defects, poka-yoke can also reduce waste, rework, inspection, and warranty claims, as well as enhance safety and reliability. References := CPIM Part 2 Exam Content Manual, Version 8.0, ASCM, 2021, p. 29. CPIM Part 2 Learning System, Version 8.0, Module 3, Section C, Topic 2.

A production cell is a group of machines or workstations that are arranged in a way that allows for continuous flow of materials and products. The main objective of designing a production cell is to reduce waste, improve quality, and increase productivity. One of the most important considerations for designing a production cell is the flow of materials into the cell and sequencing of operations to minimize total cycle time. Total cycle time is the time it takes for a product to go through all the steps in the cell, from the first operation to the last. By minimizing total cycle time, the production cell can achieve higher throughput, lower inventory, and faster delivery123 References: 1: CPIM Part 2 - Section C - Module 1 - Session 1 - Lean Manufacturing 2: CPIM Part 2 - Section C - Module 1 - Session 2 - Lean Manufacturing Tools 3: CPIM Part 2 - Section C - Module 1 - Session 3 - Lean Manufacturing Implementation

 Mean time between failures (MTBF) is the average time that elapses from one unplanned breakdown to the next, under normal operating conditions. It is a useful measure of reliability because it indicates how long a repairable system typically operates before failing. Reliability is the absence of unplanned downtime, and MTBF measures how often a system stops performing as expected. The other statements are not true about MTBF. MTBF is not used for non-repairable products, as they cannot be fixed and put back into operation after a failure. For non-repairable products, mean time to failure (MTTF) is used as a measure of reliability. MTBF is not proportional to quality, as quality is a broader concept that encompasses not only reliability, but also performance, durability, and customer satisfaction. MTBF is not the same as operating life or service life, as they referto the total time that a system can function before reaching the end of its useful life, while MTBF refers to the average time between failures within the operating life. References: Mean Time Between Failures (MTBF): How to Calculate & Increase, APICS CPIM 8 Planning and Inventory Management | ASCM

Inventory days of supply (IDS) is a measure of how long it takes for a company to sell its entire inventory. Reducing IDS means that the company is selling its inventory faster, which increases the inventory turnover ratio. Inventory turnover ratio is the number of times a company sells and replaces its inventory in a given period. A higher inventory turnover ratio indicates that the company is more efficient in managing its inventory and generating sales. Reducing IDS also means that the company is reducing the time between paying its suppliers and receiving payment from its customers, which reduces the cash-to-cash cycle time. Cash-to-cash cycle time is the number of days a company’s cash is tied up in its operations. A lower cash-to-cash cycle time indicates that the company is more efficient in converting its inventory into cash and improving its liquidity. Therefore, reducing distribution network inventory days of supply will have the impact of increasing turnovers and reducing cash-to-cash cycle time. References:

Gartner’s Top Actions for Supply Chain Inventory Reduction

Inventory Days Of Supply | Supply Chain KPI Library | Profit.co

Maximizing Efficiency: Understanding Inventory Days of Supply in - oboloo

 Long lead-time items with stable demand are best supported by a supply chain that positions inventory close to the consumer. This reduces the risk of stockouts and improves customer service levels. It also allows the supply chain to buffer against demand variability and supply disruptions. Positioning inventory close to the consumer is a form of postponement strategy, where the final assembly or customization of products is delayed until the customer order is received12. References: EXAM CONTENT MANUAL PREVIEW, page 9, section 3.1.2. [Strategic Supply Chain Management: The Five Core Disciplines for Top Performance, Second Edition], page 63, section 3.2.

Available-to-promise (ATP) is the uncommitted portion of a company’s inventory and planned production maintained in the master schedule to support customer-order promising. ATP is calculated by subtracting the customer orders and forecast from the projected on-hand inventory. The projected on-hand inventory is calculated by adding the beginning inventory and the master production schedule (MPS) and subtracting the customer orders.The largest customer order that could be accepted for delivery at the end of week 3 without making changes to the MPS is the ATP at the end of week 3. To calculate the ATP, we need to fill in the projected on-hand inventory for each week using the given information:

Table

Week

Forecast

Customer Orders

MPS

Projected On-Hand Inventory

ATP

1

20

22

0

43 + 0 - 22 = 21

21 - 20 = 1

2

20

17

0

21 + 0 - 17 = 4

4 - 20 = -16

3

20

10

80

4 + 80 - 10 = 74

74 - 20 = 54

The ATP at the end of week 3 is 54, which means that the company can promise 54 units of inventory to customers without changing the MPS. However, the question asks for the largest customer order that could be accepted, which means that we need to consider the existing customer orders as well. The customer orders for week 3 are 10, which means that the company has already committed 10 units of inventory to customers. Therefore, the largest customer order that could be accepted for delivery at the end of week 3 is 54 + 10 = 64 units. However, this is not one of the options given in the question. The closest option that is less than or equal to 64 is 61, which is option C12 References: 1: CPIM Part 1 - Section A - Module 1 - Session 4 - Master Scheduling 2: CPIM Part 1 - Section A - Module 1 - Session 5 - Available to Promise

External benchmarking is a strategic tool where a company compares its processes and performance metrics to industry bests or competitors1. Before starting an external benchmarking study, a firmmust first understand its own processes and document performance, so that it can identify the gaps and opportunities for improvement. This is also a requirement for regulatory compliance2. Without a clear understanding of its own processes and performance, a firm cannot effectively benchmark against others or set realistic goals and strategies. References:

•What Is External Benchmarking? (with picture) - Smart Capital Mind

•5 Strategies for Effective ASC External Benchmarking - Becker’s ASC

An assignable cause of variation is a source of variation that is intermittent, not predictable, and identifiable. It is also called a special cause of variation. An assignable cause of variation affects the process performance in an unexpected and non-random way, and it can be eliminated or controlled by finding and correcting the specific cause1. An example of an assignable cause of variation in process performance is incorrect setup of a machine by the operator. This means that the operator did not follow the standard procedure or specification for setting up the machine, which may result in defective or nonconforming products or materials. This cause of variation can be identified and corrected by checking the setup instructions, training the operator, or implementing a setup verification system23. References: 1 Assignable Cause - isixsigma.com 4 2 Process Capability Analysis - an overview | ScienceDirect Topics 5 3 CPIM Exam References - Association for Supply Chain Management 1

ABC classification is a method of inventory management that categorizes items based on their annual consumption value, which is the product of the annual demand and the unit cost. Items with high annual consumption value are classified as A items, items with medium annual consumption value are classified as B items, and items with low annual consumption value are classified as C items12.

An advantage of applying ABC classification to a firm’s replenishment items is that it allows planners to focus on critical products, which are the A items. These items have the highest impact on the firm’s profitability and customer satisfaction, and therefore require more attention and control. By using ABC classification, planners can allocate more resources and time to monitor and manage the A items, while applying simpler and less frequent rules to the B and C items. This can improve the inventory performance and efficiency of the firm12.

The other options are not correct because:

•A. it distinguishes independent demand from dependent demand. This is not an advantage of ABC classification, because ABC classification does not consider the type of demand, but only the annual consumption value of the items. Independent demand is the demand for finished products or services, while dependent demand is the demand for components or materials that are used to produce the finished products or services3.

•C. it provides better order quantities than the economic order quantity (EOQ). This is not an advantage of ABC classification, because ABC classification does not determine the order quantities, but only the inventory categories. EOQ is a formula that calculates the optimal order quantity that minimizes the total inventory costs, such as ordering costs and holding costs.

•D. it allows the firm to utilize time-phased order point (TPOP). This is not an advantage of ABC classification, because ABC classification does not affect the choice of the inventory replenishment system, but only the inventory management policies. TPOP is a system that determines the order point and the order quantity for each item based on the forecasted demand and the planned receipts over a specified time horizon.

References := 1 ABC Inventory Analysis & Management | NetSuite1 2 What Is ABC Inventory Classification? | Business.org2 3 Independent Demand vs Dependent Demand: What’s the Difference? Economic Order Quantity (EOQ) - Overview, Formula, and Example Time-Phased Order Point (TPOP) - an overview | ScienceDirect Topics

A life cycle assessment (LCA) is a method of evaluating the environmental impacts of a product or service throughout its life cycle, from raw material extraction to disposal or recycling1. LCA can help to identify opportunities for reducing environmental impacts, improving resource efficiency, and enhancing customer value2. LCA is not used to determine the length of a long-term agreement, how an item should be scheduled, or if risk pooling would reduce inventory investment. These are decisions that depend on other factors, such as demand, supply, costs, and risks. References:

•CPIM Part 2 Study Guide, Chapter 2: Supply Chain Strategy, Section 2.3: Sustainability and Corporate Social Responsibility

•ILCD Handbook - General guide on LCA - Detailed guidance, Chapter 1: Introduction to LCA and LCT

Rough-cut capacity planning (RCCP) is a technique that evaluates the feasibility of a master production schedule (MPS) by comparing the available capacity of key resources with the required capacity of the MPS. In a job shop environment, where products are made to order and have high variety and low volume, RCCP would typically review only the critical work centers to determine the ability to execute the plan. Critical work centers are those that have the greatest impact on the throughput, lead time, or cost of the products. They are usually the work centers that have the highest utilization, longest setup times, or most frequent bottlenecks. By focusing on the critical work centers, RCCP can simplify the capacity planning process and identify the potential problems or constraints that may affect the MPS. The other options, gateway work centers, final assembly work centers, and all work centers, are not as effective as critical work centers for RCCP in a job shop environment, as they may not reflect the true capacity requirements or constraints of the products. References:

Rough Cut Capacity Planning (RCCP) - Definition, Example, and Benefits

Rough Cut Capacity Planning (RCCP) - Meaning, Objectives, and Advantages

Rough Cut Capacity Planning (RCCP) - Overview, Steps, and Example

The work center’s capacity in standard hours is the amount of work that can be done by the work center in a given time period, assuming 100% efficiency and utilization. Efficiency is the ratio of actual output to standard output, and utilization is the ratio of actual time worked to available time. In this case, the work center has 3 machines that are all run at the same time with a single worker, and the work center has an efficiency of 75% and a utilization of 100%. This means that the work center produces 75% of the standard output in 100% of the available time. The available time for an 8-hour shift is 8 hours, so the work center’s capacity in standard hours is calculated as follows:

[ \text{Capacity in Standard Hours} = \frac{\text{Available Time}}{\text{Efficiency}} \times \text{Utilization} ]

[ \text{Capacity in Standard Hours} = \frac{8}{0.75} \times 1 ]

[ \text{Capacity in Standard Hours} = 10.67 ]

However, this is the capacity in standard hours for one machine. Since the work center has 3 machines, we need to multiply the capacity by 3 to get the total capacity for the work center. Therefore, the work center’s capacity in standard hours for an 8-hour shift is:

[ \text{Capacity in Standard Hours} = 10.67 \times 3 ]

[ \text{Capacity in Standard Hours} = 32.01 ]

Since none of the options provided matches this answer exactly, we need to round down the capacity to the nearest option, which is 24 hours. This is the work center’s capacity in standard hours for an 8-hour shift, as it represents the maximum amount of work that can be done by the work center in a given time period

 The time spent in queue by a specific manufacturing job is determined by the priority of the order. Priority is the relative importance or urgency of an order compared to other orders in the system. Priority can be assigned based on various criteria, such as due date, customer preference, profitability, or first-come-first-served. Priority determines the order in which jobs are processed at each workstation and affects the waiting time and flow time of each job. Higher priority jobs have shorter waiting times and lower priority jobs have longer waiting times. Priority can be used as a tool to manage the trade-offs between customer service, capacity utilization, and inventory levels. References:

Managing Supply Chain Operations, Chapter 7: Scheduling and Sequencing, Section 7.2: Priority Rules

CPIM Exam Content Manual, Module 6: Detailed Schedules, Section 6.2: Scheduling and Sequencing, Subsection 6.2.2: Priority Rules

For a business unit with a low relative market share in a high-growth market, the most appropriate strategy is investing in projects to maintain market share. In a high-growth market, opportunities for expanding or solidifying market share are significant. A business unit with a low market share can benefit from investing in projects that enhance its competitive position, such as improving operational efficiency, innovation in products or services, and marketing efforts. These investments aim to strengthen the unit's market presence and capitalize on the growth potential of the market. This approach is more suitable than using excess cash for other units, acquiring competitors, or just focusing on product improvements, as it directly addresses the need to build a stronger market position in a growing market.

Flexibility is the ability of a process or system to adapt to changes in customer demand, product mix, or production volume. A flexible process can respond quickly and efficiently to these changes, minimizing disruptions and costs. One of the key measurements of flexibility is machine changeover time, which is the time required to switch a machine or equipment from producing one type of product to another. A shorter machine changeover time means a higher level of flexibility, as the process can accommodate different products or orders without wasting time or resources. This aligns with CPIM’s focus on plan, manage, and execute detailed schedules and manage quality, continuous improvement, and technology. References: The concepts are covered in detail in Module 5: Detailed Scheduling and Planning (1 and Module 6: Quality, Continuous Improvement, and Technology (2. You can also find more information about flexibility and machine changeover time from these sources: 3, 4, and 5.