Pass the APICS CPIM CPIM-Part-2 Questions and answers with ExamsMirror

Input/output control (I/O) is a type of tool that is used for monitoring a capacity plan. A capacity plan is a statement of the resources needed to meet the production plan over a medium-term horizon. A capacity plan can be stated in different units of measure depending on the type of manufacturing environment, such as hours, units, tons, or dollars. Input/output control (I/O) is a method of measuring and comparing the actual input and output of a work center or a production line against the planned input and output. Input is the amount of work that is released to the work center or the production line, and output is the amount of work that is completed by the work center or the production line. Input/output control (I/O) helps to monitor the performance and efficiency of the work center or the production line, and to identify any deviations or problems that may affect the capacity plan. Input/output control (I/O) also helps to adjust the input or output levels as necessary to maintain the balance between demand and supply, and to achieve the desired throughput.

References: CPIM Exam Content Manual Version 7.0, Domain 6: Plan, Manage, and Execute Detailed Schedules, Section 6.3: Monitor Detailed Schedules, Subsection 6.3.2: Describe how to monitor input/output control (I/O) (page 60).

Up-to-date information about production order status is required to calculate the cost of work in process (WIP). WIP is the inventory of unfinished goods or partially completed products that are still in the production process1. The cost of WIP is the sum of the costs of the materials, labor, and overhead that have been incurred in the production process but have not yet been transferred to the finished goods inventory2. To calculate the cost of WIP, we need to know how much of each production order has been completed and how much remains to be done. This information can be obtained from the production order status, which is a report that shows the current status of each production order in terms of its quantity, start date, end date, completion percentage, and variance3. By using the production order status, we can determine the amount of WIP for each production order and for the entire production process. This can help us monitor and control the production efficiency, profitability, and quality4.

References: 1: Work In Progress (WIP) Definition 2 2: Work-in-Process (WIP) Accounting 3 3: Production Order Status Report 5 4: How to Calculate Work in Process Inventory 6

Locating service facilities differs from locating manufacturing or distribution facilities primarily because service location decisions are driven by revenue concerns, while manufacturing and distribution location decisions are driven by costs. This is because service facilities are usually closer to the customers and depend on their demand and preferences. Service facilities need to consider factors such as customer convenience, accessibility, visibility, traffic, and competition when choosing a location, as these factors affect the revenue potential and market share of the service facility1. Manufacturing and distribution facilities, on the other hand, are usually farther from the customers and depend on their supply chain efficiency and effectiveness. Manufacturing and distribution facilities need to consider factors such as transportation, labor, utilities, taxes, and regulations when choosing a location, as these factors affect the cost structure and profitability of the facility2.

The other options are not correct. Competition is a factor that affects both service and manufacturing or distribution location decisions, as it influences the market attractiveness and strategic positioning of the facility3. Real estate costs are also a factor that affects both service and manufacturing or distribution location decisions, as they represent a significant portion of the fixed costs of the facility4. Surveying customers or suppliers is a method that can be used for both service and manufacturing or distribution location decisions, as it provides valuable information about the demand and supply characteristics of the market5.

References : Service Facility Location: A Review of Applications and Methods; Facility Location - Factors Influencing the Location; Competitive Environment: Definition, Examples & Factors - StudySmarter US; Facility Location | IntechOpen; Seven Key Factors to a Facility Location - Chron.com.

The production plan is a statement of the resources needed to meet the aggregate demand plan over a medium-term horizon. The production plan is the output of the supply planning step in the sales and operations planning (S&OP) process. The production plan relates to a firm’s financial planning because it is used to identify future cash needs. Cash needs are the amount of money that a firm requires to operate and grow its business. Cash needs can be influenced by various factors, such as sales revenue, cost of goods sold, operating expenses, capital expenditures, inventory levels, accounts receivable, accounts payable, and taxes. The production plan can help to estimate the cash inflows and outflows associated with these factors, and to determine the optimal balance between them. The production plan can also help to identify the potential sources and uses of cash, such as borrowing, investing, or paying dividends. By identifying future cash needs, the production plan can help to improve the firm’s liquidity, profitability, and solvency.

References: CPIM Exam Content Manual Version 7.0, Domain 4: Plan and Manage Supply, Section 4.1: Develop Supply Plans, Subsection 4.1.2: Describe how to develop a production plan (page 36).

A3 method is a tool that can be used in a root cause corrective action process to determine the problem of a machine that is suddenly having excessive downtime. A3 method is a structured problem-solving approach that follows the Plan-Do-Check-Act (PDCA) cycle and uses a single sheet of paper (A3 size) to document the problem, analysis, countermeasures, and results1. A3 method can help identify the root cause of a problem by using tools such as the 5 Whys or the fishbone diagram, and then develop and implement effective corrective actions to prevent recurrence2. A3 method can also help communicate the problem and the solution to stakeholders, as well as monitor and evaluate the outcomes3.

The steps of the A3 method are4:

Step 1: Define the problem and its impact. Describe the current situation, the gap between the actual and the desired state, and the scope and magnitude of the problem.

Step 2: Identify the root cause of the problem. Use tools such as the 5 Whys or the fishbone diagram to analyze the factors that contribute to the problem and drill down to its root cause.

Step 3: Propose countermeasures to address the root cause. Generate possible solutions that can eliminate or reduce the root cause, and evaluate their feasibility, effectiveness, and costs.

Step 4: Implement countermeasures. Select the best solution and plan how to execute it. Define the roles, responsibilities, resources, timeline, and expected outcomes of the implementation.

Step 5: Check results and process. Measure and compare the results before and after the implementation, and verify if the problem has been solved or improved. Also check if the process has been followed correctly and document any deviations or issues.

Step 6: Standardize successful processes or identify unresolved issues. If the results are satisfactory, standardize the new process and ensure that it is sustained. If not, identify the remaining or new issues and repeat the A3 method.

Therefore, A3 method is a tool that can be used in a root cause corrective action process to determine the problem of a machine that is suddenly having excessive downtime.

References: 1: What is an A31 2: How to Use an A3 Report for Problem Solving 2 3: The A3 Problem Solving Method 4 4: The A3 Report – A Simple Tool for Complex Problems 5

A company’s process technology and equipment should be characterized by product-independent processes and flexible automation if its competitive business strategy is based on offering customized products or features and a rapid response to market shifts. Product-independent processes are processes that can produce a variety of products or features without requiring major changes or adjustments in the production system. Flexible automation is a type of automation that can adapt to different product specifications or volumes by using programmable or reconfigurable machines, robots, or software. Product-independent processes and flexible automation can enable a company to offer customized products or features and a rapid response to market shifts by allowing it to:

Produce small batches or single units of products or features that meet specific customer needs or preferences.

Switch quickly and easily between different products or features without losing time or efficiency.

Incorporate new technologies, materials, or designs into the production system without disrupting the existing operations.

Respond to changes in demand or supply by adjusting the production capacity or output accordingly.

Continuous flow processes and a high degree of fixed automation are not suitable for a company’s process technology and equipment if its competitive business strategy is based on offering customized products or features and a rapid response to market shifts. Continuous flow processes are processes that produce products or features in a continuous and uninterrupted manner, without any breaks or buffers between the stages. Fixed automation is a type of automation that uses specialized machines or equipment that are designed to perform a specific task or operation. Continuous flow processes and fixed automation can enable a company to achieve high efficiency, productivity, and quality, but they also have some limitations, such as:

They are suitable for producing large volumes of standardized products or features that have stable and predictable demand.

They are difficult and costly to modify or change when there is a need to produce different products or features or to incorporate new technologies, materials, or designs.

They are inflexible and rigid when there are variations or fluctuations in demand or supply, as they cannot adjust the production capacity or output easily.

Product-independent processes with parallel production lines are not appropriate for a company’s process technology and equipment if its competitive business strategy is based on offering customized products or features and a rapid response to market shifts. Product-independent processes with parallel production lines are processes that use multiple identical machines or equipment that can produce the same product or feature simultaneously. Product-independent processes with parallel production lines can enable a company to increase its production capacity and output, but they also have some drawbacks, such as:

They are suitable for producing high volumes of standardized products or features that have high and constant demand.

They are inefficient and wasteful when there is a need to produce different products or features or to incorporate new technologies, materials, or designs, as they require duplication of resources and equipment.

They are redundant and unnecessary when there are variations or fluctuations in demand or supply, as they create excess inventory or idle capacity.

Product-dependent processes and automation based on product volume are not optimal for a company’s process technology and equipment if its competitive business strategy is based on offering customized products or features and a rapid response to market shifts. Product-dependent processes are processes that can produce only one type of product or feature, or that require significant changes or adjustments in the production system to produce different products or features. Automation based on product volume is a type of automation that uses different machines or equipment depending on the volume of production required for each product or feature. Product-dependent processes and automation based on product volume can enable a company to optimize its production costs and quality, but they also have some disadvantages, such as:

They are suitable for producing low volumes of specialized products or features that have low variability and uncertainty in demand.

They are complex and time-consuming when there is a need to produce different products or features or to incorporate new technologies, materials, or designs, as they require frequent changes or setups in the production system.

They are unresponsive and slow when there are variations or fluctuations in demand or supply, as they cannot adapt the production capacity or output quickly.

References := Process Technology - an overview | ScienceDirect Topics, Flexible Automation - an overview | ScienceDirect Topics, Continuous Flow Process - an overview | ScienceDirect Topics, Fixed Automation - an overview | ScienceDirect Topics, Parallel Production Line - an overview | ScienceDirect Topics, Product Dependent Process - an overview | ScienceDirect Topics

The output of the equipment on Day 6 can be calculated by multiplying the demonstrated capacity, the utilization, and the efficiency. The demonstrated capacity is given as $1,200 per day. The utilization is the ratio of the actual time that the equipment is used to the available time that it could be used. Since the utilization is reduced by 25% on Day 6, it means that the equipment is used for 75% of the available time. Therefore, the utilization is 0.75. The efficiency is the ratio of the actual output to the standard output. It is given as 110%, which means that the equipment produces 10% more than the standard output. Therefore, the efficiency is 1.1. The output on Day 6 can be found by multiplying these three factors:

Output = Demonstrated capacity x Utilization x Efficiency Output = $1,200 x 0.75 x 1.1 Output = $990

Therefore, the output on Day 6 is $990. References: CPIM Part 2 Exam Content Manual, Version 7.0, Domain 6: Plan, Manage, and Execute Detailed Schedules, Section A: Detailed Capacity Planning and Scheduling, Subsection 2: Capacity Management Concepts and Calculations, p. 37-38.

 The capacity requirements plan is used primarily to balance capacity and load at work centers. A work center is a location where one or more resources perform a specific operation or a group of operations. Capacity is the amount of time or output that a work center can offer for production activities. Load is the amount of time or output that a work center is required to produce based on the planned production schedule. Balancing capacity and load means matching the available capacity with the required load, so that there is no excess or shortage of capacity at any work center.

The capacity requirements plan is a report that shows the projected load and capacity of each work center over a planning horizon. It is derived from the master production schedule (MPS), which specifies the quantity and timing of finished goods to be produced, and the bill of materials (BOM), which specifies the components and materials needed for each finished good. The capacity requirements plan also uses the routing file, which specifies the sequence of operations and work centers required for each finished good, and the work center file, which specifies the capacity and availability of each work center. The capacity requirements plan can help to identify any gaps or surpluses in capacity at each work center and to take corrective actions, such as revising the MPS, rescheduling operations, adding or reducing resources, or outsourcing production.

The other options are not the primary uses of the capacity requirements plan. Calculating the level of available capacity is an input to the capacity requirements plan, not an output. The level of available capacity is determined by the work center file, which contains information such as shifts, hours, efficiency, utilization, and maintenance of each work center. Determining the overall product load profile is not a use of the capacity requirements plan, as it does not consider the product mix or demand variability. The overall product load profile is a general estimate of the total production volume or demand over a period of time. Determining the priority of orders is not a use of thecapacity requirements plan, as it does not consider the due dates or urgency of orders. The priority of orders is determined by using priority rules or dispatching methods, such as first-come-first-served (FCFS), shortest processing time (SPT), earliest due date (EDD), or critical ratio (CR).

References := Capacity Requirements Planning (CRP): Definition and Procedures, Capacity Requirements Planning (CRP Plan and Strategies) - ERP Information, Definition of Capacity Requirements Planning (CRP) - Gartner …

A customer value proposition (CVP) is a statement that summarizes the benefits that a product or service offers to a target customer segment1. A CVP can help a company differentiate itself from its competitors by highlighting its unique value proposition (UVP), which is the main reason why customers should choose its product or service over others2. A CVP can also help a company communicate its value to its customers, increase customer satisfaction and loyalty, and improve its market position3.

One of the strategies that can improve the effectiveness of a CVP and enhance its differentiation in the market is to adopt best practices that improve product design. Product design is the process of creating a new product or service that solves a customer problem or fulfills a customer need4. By improving product design, a company can create products or services that are more desirable, feasible, and viable for its customers5. Some of the best practices that can improve product design are:

Understanding the customer: conducting research and analysis to identify the customer segments, their jobs, pains, and gains, and their expectations and preferences. This can help create products or services that are tailored to the customer needs and wants, and deliver value that exceeds their expectations.

Using the Value Proposition Canvas: a tool that helps design, test, create, and manage products and services that customers actually want. The Value Proposition Canvas consists of two parts: the Customer Profile, which describes the customer segment in terms of their jobs, pains, and gains; and the Value Map, which describes how the product or service creates value for the customer by addressing their jobs, relieving their pains, and creating their gains. The Value Proposition Canvas can help align the product or service with the customer needs and wants, and create a fit between them.

Applying design thinking: a human-centered approach to innovation that integrates the needs of people, the possibilities of technology, and the requirements of business. Design thinking involves five phases: empathize, define, ideate, prototype, and test. Design thinking can help create products or services that are desirable for the customers, feasible for the technology, and viable for the business.

Incorporating feedback loops: collecting and analyzing data from customers and stakeholders to measure the performance and impact of the product or service. Feedback loops can help validate the assumptions and hypotheses about the customer needs and wants, test the effectiveness of the value proposition, and identify areas for improvement or innovation.

Therefore, by adopting best practices that improve product design, a company can create products or services that deliver superior value to its customers, and differentiate itself from its competitors in the market.

References: 1: Customer Value Proposition Definition 3 2: Unique Value Proposition Definition 4 3: How to Write a Value Proposition (+ 6 Modern Examples) 5 4: Product Design Definition 5: What is Product Design? : Customer Discovery: The Ultimate Guide : Value Proposition Canvas – Download the Official Template 3 : What is Design Thinking? : Feedback Loop Definition

Resource planning is a planning module that considers the longest-range planning goals. Resource planning is a method of determining the long-term capacity and resource requirements for a manufacturing system, based on the aggregate production plan, the sales and operations plan, and the business plan. Resource planning helps to align the production capacity and resources with the strategic objectives and goals of the organization. Resource planning considers the longest-range planning goals, which are usually expressed in terms of years or quarters.

The other options are not planning modules that consider the longest-range planning goals. Capacity requirements planning (CRP) is a planning module that calculates the capacity and load for each work center in a manufacturing system, based on the material requirements plan, the routing file, and the open order file. CRP helps to identify and resolve the capacity constraints and bottlenecks in the production process. CRP considers the short-range planning goals, which are usually expressed in terms of days or weeks. Input/output analysis is a planning module that compares the actual input/output of each work center in a manufacturing system with the planned input/output, based on the capacity requirements plan and the shop floor data. Input/output analysis helps to monitor and control the performance and efficiency of each work center. Input/output analysis considers the short-range planning goals, which are usually expressed in terms of days or weeks. Rough-cut capacity planning (RCCP) is a planning module that estimates the feasibility and adequacy of the key resources or work centers in a manufacturing system, based on the master production schedule and the bill of resources. RCCP helps to validate and adjust the master production schedule according to the available capacity and resources. RCCP considers the medium-range planning goals, which are usually expressed in terms of months or weeks. References: CPIM Exam Content Manual Version 7.0, Domain 4: Plan and Manage Supply, Section 4.2: Supply Planning Methods, p. 26; Resource Planning; Capacity Requirements Planning.