Summer Certification Limited Time 70% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code = getmirror

Home
Brocade
BCFP
143-085
Brocade Certified Fabric Professional Gen 5 Questions and Answers

Pass the Brocade BCFP 143-085 Questions and answers with ExamsMirror

Practice at least 50% of the questions to maximize your chances of passing.

Exam 143-085 Premium Access

View all detail and faqs for the 143-085 exam

Go to Exam

813 Students Passed

89% Average Score

95% Same Questions

Viewing page 2 out of 3 pages

Viewing questions 11-20 out of questions

Questions # 11:

Your customer is replicating banking transaction data to a remote data center using Brocade 6510s and has a limited bandwidth of 32 Gbps. The transaction data should have priority over other data being replicated.

Which change meets this requirement?

Options:

Configure compression on the trunk.

Configure bottleneck detection on the trunk.

Configure QoS on the trunk and use the setratelimit command for low priority traffic.

Configure the QoS zone for the device transaction data to high priority.

Answer

Questions # 12:

Your existing fabric has Brocade switches using Fabric OS v7.1 with Fabric Watch and Advanced Performance Monitor licenses already installed. You want to upgrade to v7.2 and run Flow Vision.

Which statement is true?

Options:

You will need to install the Fabric Vision license in addition to the existing licenses on all switches in the fabric.

You will need to install the Fabric Vision license only on the switches which are the source and destination for the flow.

You do not need a Fabric Vision license on the switches.

The existing Fabric Watch and Advanced Performance Monitor licenses on the switches will be deprecated after the upgrade.

Answer

Questions # 13:

You have an FC-FC routed SAN environment and have many servers booting over SAN.

To ensure the routed targets are imported to a routed fabric before the host is online, what should be used?

Options:

LSAN Enforce tag

LSAN Speed tag

LSAN Zone Binding

Designated Router Port Selection

Answer

Questions # 14:

Refer to the Exhibit.

Question # 14

Referring to the exhibit, port A and port B must be configured as which port types?

Options:

Port A = EX_Port and Port B = VE_Port

Port A = EX_Port and Port B = VEX_Port

Port A = E_Port and Port B = VEX_Port

Port A = E_Port and Port B = VE_Port

Answer

Questions # 15:

Refer to the Exhibit.

Question # 15

In the exhibit, using all Gen 5 16 Gbps switches, how many Domain IDs will be shown in the fabric show output on Switch 2?

Options:

Answer

Questions # 16:

You need to deploy FC-FC routing between two Gen 5 edge fabrics across an FCIP link. Each edge fabric contains a single Brocade 6520 switch. Your backbone fabric consists of two Brocade 7800 Extension Switches.

How do you enable FC-FC routing using FCIP?

Options:

Configure E_Ports between the 7800s and VE_Ports on each edge fabric connecting to EX_Ports in the backbone.

Configure VE_Ports between the 7800s and VE_Ports on each edge fabric connecting to VEX_Ports in the backbone.

Configure VEX_Ports between the 7800s and E_Ports on each edge fabric connecting to EX_Ports in the backbone.

Configure VE_Ports between the 7800s and E_Ports on each edge fabric connecting to EX_Ports in the backbone.

Answer

Questions # 17:

Refer to the exhibit.

Question # 17

Referring to the exhibit from Brocade Network Advisor, how would you ensure that all of the switches in the backbone fabric are using the policy with the lowest thresholds?