Summer Certification Limited Time 70% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code = getmirror

Pass the Brocade Converged 150-820 Questions and answers with ExamsMirror

Practice at least 50% of the questions to maximize your chances of passing.
Exam 150-820 Premium Access

View all detail and faqs for the 150-820 exam


656 Students Passed

88% Average Score

98% Same Questions
Viewing page 2 out of 6 pages
Viewing questions 11-20 out of questions
Questions # 11:

A Brocade VCS Fabric is running NOS 4.1.1 on two Brocade VDX 8770s and four Brocade VDX 6740s in logical chassis mode. You are required to deploy FCoE servers and Layer 3 features in the solution.

Which two licenses are required? (Choose two.)

Options:

A.

a VCS Fabric license on each switch

B.

an FCoE base license on each switch

C.

a Layer 3 license on each VDX 6740

D.

a Layer 3 license on each VDX 8770

Questions # 12:

You are attempting to merge two Brocade VDX switches, both running in fabric mode, but they segment.

sw0# show fabric islports

Name: sw0

Type: 96.5

State: Online

Role: Fabric Principal

VCS Id: 10

Config Mode:Local-only

Rbridge-id: 4

WWN: 10:00:00:05:33:91:48:f7

FCF MAC: 00:05:33:91:48:f7

sw0# show fabric islports

Name: sw0

Type: 96.5

State: Online

Role: Fabric Principal

VCS Id: 10

Config Mode:Distributed

Rbridge-id: 20

WWN: 10:00:00:05:33:90:92:e4

FCF MAC: 00:05:33:90:92:e4

Referring to the exhibit, what is the reason?

Options:

A.

Role conflict

B.

VCS ID conflict

C.

RBridge ID conflict

D.

Config Mode conflict

Questions # 13:

You just connected a new Brocade VDX 6740T-1G switch to the top of rack. You want to connect two 40 GbE uplinks to VDX1 and two 40 GbE uplinks to VDX2. Two of the links come online and two of them are segmented.

What is a reason for this problem?

Options:

A.

A 40 GbE license needs to be installed.

B.

A DPOD 2 license must be installed.

C.

You cannot enable four 40 GbE uplinks in a VDX 6740T-1G.

D.

A VCS license needs to be installed.

Questions # 14:

What are two valid uses of the NETCONF protocol? (Choose two.)

Options:

A.

for VCS Fabric authorization

B.

for device configuration

C.

for SNMP trap polling

D.

for fabric configuration management

Questions # 15:

A customer has a Brocade VDX 8770 and wants to implement policy based routing (PBR).

ip access-list standard acl1

seq 10 permit 1.1.1.1 255.255.255.255

seq 20 deny 11.11.11.11 255.255.255.255

!

ip access-list standard acl2

seq 10 permit 2.2.2.2 255.255.255.255

route-map brocade1 permit 10

match ip address acl acl1

set ip interface null0

set ip vrf brocade1 next-hop 3.3.3.3

!

route-map brocade1 permit 20

match ip address acl acl2

set ip next-hop 4.4.4.4

set ip vrf brocade1 next-hop 3.3.3.5

!

route-map brocade1 permit 30

set ip interface null0

Based on the configuration shown in the exhibit, what will happen to traffic coming from 2.2.2.2?

Options:

A.

Traffic from 2.2.2.2 will be forwarded to 3.3.3.3.

B.

Traffic from 2.2.2.2 will be forwarded to 4.4.4.4.

C.

Traffic from 2.2.2.2 will be sent to interface null0.

D.

Traffic from 2.2.2.2 will be forwarded to 3.3.3.5.

Questions # 16:

For direct attached active optical cables, which two distances are supported on Brocade VDX products? (Choose two.)

Options:

A.

5 meters

B.

7 meters

C.

10 meters

D.

30 meters

Questions # 17:

Exhibit:

switch# show ip route

Destination Gateway Port Cost Type Uptime

1 0.0.0.0/0 10.24.64.1 mgmt 1 1/1 S 8m24s

2 1.1.1.0/24 10.1.1.10 Ve 10 1/1 S+ 3m11s

3 1.1.2.0/24 DIRECT Ve 12 0/0 D 3m11s

4 10.24.64.0/20 DIRECT mgmt 1 0/0 D 8m28s

Exhibit:

Referring to the exhibit, which statement is true?

Options:

A.

The route to 1.1.1.0/24 is a backup, and only active if the default route goes down.

B.

The 1.1.1.0/24 subnet is in a different VRF.

C.

The default route was dynamically learned.

D.

The 1.1.2.0/24 route was dynamically learned.

Questions # 18:

-- Exhibit –

Question # 18

-- Exhibit --

Click the exhibit button.

You notice that iSCSI traffic is slow on the iSCSI storage device. The

Brocade VCS Fabric is in logical-chassis mode.

Which two actions would increase performance? (Choose two.)

Options:

A.

Increase the MTU size to 9000 on interface 1/0/10.

B.

Apply the CEE map to interface 1/0/10.

C.

Configure the iSCSI storage device to use PFC and ETS.

D.

Apply QoS CoS 4 to interface 1/0/10.

Questions # 19:

Which Brocade VCS Fabric mode is required to support communication to an NSX controller?

Options:

A.

VxLAN gateways must be in VCS Logical Chassis mode.

B.

VxLAN gateways must be in global configuration mode.

C.

VxLAN gateways must be in RBridge mode.

D.

VxLAN gateways must be in VCS Fabric mode.

Questions # 20:

You need to provision FCoE connectivity for the servers shown in the exhibit.

Question # 20

Which two configuration actions must be taken? (Choose two.)

Options:

A.

Configure the FCOE port on port channel 10.

B.

Configure the FCOE port on port channel 20.

C.

Configure the FCOE port on the interfaces to the 3rd party DCB switch.

D.

Configure the FCOE port on the interfaces to host B.

Viewing page 2 out of 6 pages
Viewing questions 11-20 out of questions
TOP CODES

TOP CODES

Top selling exam codes in the certification world, popular, in demand and updated to help you pass on the first try.