Pass the Checkpoint CCSE 156-315.82 Questions and answers with ExamsMirror

The correct answer isB. CPTA stands forCheck Point Transfer Agent, and its role in the policy installation flow is to transfer policy files from the Security Management Server to the applicable Security Gateway or gateways. In the traditional flow, after verification, conversion, code generation, and compilation are completed, the Management Server invokes CPTA to send the prepared policy package to the gateway. This is not a ThreatCloud communication component, so option A is wrong. It is also not the Gaia software update mechanism; that function is handled by CPUSE and the Deployment Agent, making option C wrong. Option D is unrelated because license and contract retrieval is not CPTA’s role. CPTA belongs specifically to theTransfer/Commitphase of policy installation. On the gateway side, the received files are staged and then committed so that the gateway can enforce the newly installed policy. Reference topic:Policy Installation Flow / Check Point Policy Transfer Agent.

========

The correct answer isC. The R82 migrate_server export command supports optional flags for exporting logs. The -l parameter exports and imports Check Point logswithoutlog indexes, while the -x parameter exports and imports Check Point logswith their log indexesfrom $FWDIR/log/. Therefore, when the requirement is to export the Management Database with both logs and log indexes, the correct flag is -x. Option A is wrong because -n is not the parameter for including logs and indexes. Option B is wrong because it uses the older migrate utility and -l, which does not include log indexes. Option D has the correct -x idea but uses the wrong command/path for R82 migration from R80.20 and higher. The correct R82 command pattern is: ./migrate_server export -v R82 -x / < Full Path > / < ExportFileName > . Before using -x, log indexes must be closed and saved, which is why this option is heavier than a normal database-only export.

========

The correct answer isD. TheCompliance Bladeis designed to continuously evaluate the Check Point security infrastructure against best practices, regulatory standards, policies, Software Blade configuration, and gateway settings. Check Point documentation states that the Compliance Blade uses Continuous Compliance Monitoring technology to examine Security Gateways, Software Blades, policies, and configuration settings against an extensive database of security best practices, and it suggests corrective measures when deficiencies are found. SmartEvent is powerful for event correlation, investigation, and monitoring, but it is not the blade whose core function is best-practice compliance remediation. A generic Monitoring Blade is not the correct Check Point answer. VPN is a connectivity/encryption blade, not a compliance-remediation engine. Therefore, when the question asks which blade recommends corrective measures for security issues, the correct blade isCompliance. Reference topic:Compliance Blade / Continuous Compliance Monitoring.

========

The correct answer is D. Check Point R82 places the migrate_server utility under $FWDIR/scripts. When the Management Server has no Internet connectivity, the export operation must use the -skip_upgrade_tools_check parameter so that migrate_server does not attempt to contact Check Point Cloud to check for a newer Upgrade Tools package. Therefore, option D contains both the correct utility location and the required offline parameter. Option A incorrectly places migrate_server under $CPDIR/bin. Option B invents a -no_internet parameter that is not part of the documented syntax. Option C uses the wrong directory and omits the offline parameter. Operationally, the complete command must also specify the export file ' s full path and name, for example after changing to $FWDIR/scripts. Reference topic: Management Database Migration / migrate_server export.

The correct answer isC. Continuous Compliance Monitoring is designed to continuously evaluate the managed Check Point environment, and automatic scans are triggered both on a regular schedule and after relevant management changes are published from SmartConsole. The Compliance Blade examines Security Gateways, Software Blades, policies, and configuration settings against best practices and standards, so it must respond when the management database changes. Option A is wrong because restarting CPM and CPD is not the normal compliance-scan trigger. Option B is also wrong because gateway daemon restarts are not the stated Compliance Blade trigger model. Option D is incomplete because it mentions periodic scans but omits the important publish-triggered scan behavior after SmartConsole changes. The operational logic is simple: a daily scan catches drift over time, while a publish-triggered scan evaluates newly committed management changes. For CCSE, connect Compliance Blade scanning todaily checks plus SmartConsole Publish actions, not service restarts. Reference topic:Compliance Blade / Continuous Compliance Monitoring and policy/configuration evaluation.

========

The correct answer isA. After ElasticXL initial setup, the default bond interfaces aremagg1andSync. The physical Mgmt interface becomes a subordinate interface inside the magg1 bond. The physical Sync interface is renamed to eth1-Sync and becomes a subordinate interface inside the Sync bond. This means the bond names the administrator must recognize are magg1 for management and Sync for synchronization. Option B lists physical/logical port names rather than the correct bond-interface names. Option C mixes a physical management concept with the management bond name, making it incomplete and inconsistent. Option D again uses “Management” as a generic label rather than the documented bond name. Check Point’s FAQ confirms that ElasticXL supports MAGG through the default magg1 bond and supports a Sync bond through the default Sync bond. Reference topic:ElasticXL Important Notes / Default management and Sync bonds.

========

The correct answer isC. In Check Point Management High Availability, policy and object changes are made through theActiveSecurity Management Server. If the Active server fails or is intentionally taken offline, a Standby server does not automatically assume the Active role. The administrator must manually initiate a changeover from SmartConsole so that a Standby server becomes Active. Check Point’s R82 Security Management documentation states that if the Primary Security Management Server fails or is offline for maintenance, the administrator can initiate a changeover so the Secondary server takes over. It also states that changeover between Active and Standby Management Servers isnot automatic. Option A is wrong because the Standby server is madeActive, not promoted to “Primary”; Primary and Secondary are installation roles. Option B is wrong because there is no automatic priority-based election. Option D is gateway-cluster-style thinking and does not apply to Management HA. Reference topic:Management High Availability / Changeover Between Active and Standby.

========

The correct answer isB. Check Point’s R82 ElasticXL important notes state that an ElasticXL Cluster supports a maximum ofthree ElasticXL Cluster Members on each ElasticXL Siteandsix ElasticXL Cluster Members in total. Six total members with three per site means a maximum of two sites. Option A is wrong because three sites would imply up to nine members, which exceeds the six-member total. Option C is wrong because it limits each site to two members and permits three sites, which is not the documented ElasticXL structure. Option D is wrong because four members per site is unsupported. The architecture is therefore clear: ElasticXL scales up to three members in a site and supports a second site for HA-style topology, for a maximum total of six members. If more members are required, Check Point documentation explicitly directs administrators to use Maestro instead. Reference topic:ElasticXL Important Notes / Supported members and sites.

========

The correct answer isC. A special JSON configuration file is not always required. Check Point’s R82 Installation and Upgrade Guide states that if the target R82 Security Management Server is installed with a different IP address than the source Security Management Server, the administrator must create a special JSON configuration file before importing the management database. The guide also states that if none of the servers in the same Security Management environment changed their original IP addresses, then the special JSON configuration file is not required. If even one server changes to a new IP address, the same JSON configuration file must be used on all servers in that environment, including Log Servers and SmartEvent Servers. Option A is corrupted and technically meaningless. Option B is wrong because JSON may be required in IP-change scenarios. Option D is wrong because the file is conditional, not universal. The exact CCSE rule is:JSON configuration file is required only when a server IP address changes during the upgrade/migration process. Reference topic:Required JSON Configuration File / Management Database Import.

========

The correct answer is C. Check Point’s R82 Site-to-Site VPN documentation states that the goal of Internet Key Exchange is for both VPN peers to independently produce the same symmetric key. That key is then used to encrypt and decrypt the IP traffic carried through the VPN tunnel. IKE does not transmit the finished symmetric encryption key from the initiator to the responder or from the responder to the initiator. Instead, Diffie-Hellman exchanges key-building material so that both peers can derive the same shared secret independently. This is why options A and D are incorrect. Option B is also incorrect because the two sides do not maintain different “unique” symmetric keys for the same SA. The defining behavior is that both sides independently derive matching symmetric key material, making C the precise answer.

==========