Pass the Cisco CCNP Enterprise 300-430 Questions and answers with ExamsMirror

 For a large company requiring support for 32 VLANs for different departments, the most efficient solution is to configure one single SSID and use Cisco ISE for dynamic VLAN assignment based on user roles. Cisco ISE can classify users into different groups and assign them to the appropriate VLANs. This approach reduces the complexity of managing multiple SSIDs and simplifies the user experience while maintaining a high level of security and network segmentation. References: CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide

The correct command to add a VLAN with a specific ID to a FlexConnect group in a Cisco Wireless LAN Controller (WLC) is ‘config flexconnect group BranchA-FCG vlan 30 add’. This command specifies the FlexConnect group name ‘BranchA-FCG’ and the VLAN ID ‘30’, followed by the action ‘add’, which is consistent with Cisco’s CLI syntax for WLC configuration. References: CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide

When performing a Cisco Hyperlocation accuracy test, the relevant parameters include the X, Y real location and the client MAC address. The X, Y coordinates provide the actual location data needed for the test, while the client MAC address identifies the specific device being located.

A Public-Signed SAN (Subject Alternative Name) certificate allows multiple domain names to be protected with a single certificate. This is useful in a distributed environment like a guest portal on Cisco ISE, where there may be multiple nodes with different Common Names (CNs). Using a SAN certificate can prevent CN mismatch errors during SSL/TLS handshakes. References: CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide

To integrate the Mobility Services Engine (MSE) with Cisco Prime Infrastructure for tracking the location of clients and rogues on maps, it is essential to add the MSE to Cisco Prime Infrastructure using the communication credentials specific to Cisco Prime Infrastructure. This ensures that both systems can communicate effectively. Additionally, a valid license for location tracking must be applied to enable the MSE’s location services capabilities. Without this license, the MSE would not be able to provide client and rogue location tracking functionalities. References := ( CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide )

 When a network engineer receives an alert about a rogue AP and determines it is a security threat inside the campus, the fastest way to disable it is by updating its status in Cisco Prime Infrastructure to ‘contained’. This action instructs the system to prevent the rogue device from communicating with other devices on the network, effectively isolating it without having to physically locate or manually disable it. References := ( CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide )

 In the context of Cisco Catalyst 9800 Series Wireless Controllers, RADIUS profiling requires the correct AAA (Authentication, Authorization, and Accounting) configuration to collect and forward details about clients to a RADIUS server such as Cisco ISE (Identity Services Engine). The correct command in this scenario is “aaa accounting network acct_method start-stop group rad-group” which enables accounting of network services. This command starts gathering accounting information for all network-related service requests and sends start and stop records to the RADIUS server specified in the ‘rad-group’. This allows the controller to forward information about clients’ activities on the wireless network to Cisco ISE for profiling.

References := ( CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide )

To ensure reliable streaming of multicast video over a wireless link, it’s essential to optimize the multicast settings on the controller. Option B, implementing video-stream for the multicast video on the controller, is a feature that optimizes the delivery of multicast streams by converting them into unicast streams for specific clients, thus improving reliability. Option C, allowing multicast-direct to work correctly, involves enabling multicast-direct globally, which allows multicast packets to be sent directly to clients without the need for them to subscribe to a specific multicast group, enhancing efficiency and reliability. References: CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide

In Quality of Service (QoS) for networking, Class of Service (COS) and Differentiated Services Code Point (DSCP) are used for traffic classification and prioritization. Voice traffic is generally given high priority due to its sensitivity to delay and requires proper tagging to maintain quality over the network.

The correct mapping for voice traffic, according to best practices, is a COS value of 5 mapped to a DSCP value of 46. This is because DSCP 46 corresponds to Expedited Forwarding (EF), which is typically used for voice traffic prioritization in IP networks.

The exhibit shows the output from a command on a network device that displays the current mappings between COS values and DSCP values. The mapping that needs modification for correct voice traffic tagging can be identified by looking at the standard practice for voice QoS, which uses a COS value of 5 mapped to a DSCP value of 46.

References := ( CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide )

Before running a Client Traffic Stream Metrics report in Cisco Prime Infrastructure, the task that must be run is “client status”. This task collects the necessary data regarding the clients’ traffic streams, which is then used to generate the report. References := Cisco Prime Infrastructure Reports User Guide