Pass the Cisco CCNP Enterprise 300-435 Questions and answers with ExamsMirror

The correct ncclient method used to collect the running configuration of a Cisco IOS XE device that uses NETCONF is config=m.get_config(source='running'). This method retrieves the specified configuration (in this case, ‘running’) from the device using NETCONF. References: Automating Cisco Enterprise Solutions Official Cert Guide

The difference between OpenConfig and native YANG data models lies in their development and purpose:

D: Native models are developed by vendors and are specific to their platforms. They are designed to integrate features or configurations that are relevant only to that vendor’s platform. Native models, being vendor-specific, provide the most detailed and granular control over the vendor’s devices1.

OpenConfig models, on the other hand, are developed by a collaborative group of network operators and are intended to be vendor-neutral. They aim to provide a more standardized model that can be used across different vendors’ equipment, focusing on the needs of the operators rather than the specific capabilities of the devices1.

References:

Cisco Blogs on YANG models1

CBT Nuggets on Native YANG models2

Introduction to YANG - LTRSDN-2260

Graphical user interface, text, application Description automatically generated

MV Sense MQTT API has the capability to request and subscribe to historical, current, or real-time data. This allows applications to receive updates about what’s happening in an environment monitored by Meraki MV smart cameras. References: Automating Cisco Enterprise Solutions Official Cert Guide

To insert the project into Git using the account python_programmer, one would need to initialize the local directory as a Git repository, add files to it, commit those files with an appropriate message, add a remote repository URL pointing to where the repository should be pushed on GitHub under python_programmer’s account, and finally push the changes up to that remote repository. Option A follows this process correctly: ‘git init’ initializes the local directory as a Git repository; ‘git add “device_status.py”’ stages changes; ‘git commit -m “Initial Revision”’ commits staged changes with message; ‘git remote add origin 6’ adds new remote repo; ‘git push -u origin master’ pushes committed changes up to GitHub. References: = Automating Cisco Enterprise Solutions Official Cert Guide

Zero Touch Provisioning (ZTP) is a method used to automate the process of configuring network devices without manual intervention. When a device is first powered on, it uses DHCP to obtain an IP address and other network settings, including the location of a TFTP server from which it can download its initial configuration. This allows devices to be deployed at scale with minimal effort, as they can automatically configure themselves as soon as they are connected to the network. References := (Automating Cisco Enterprise Solutions Official Cert Guide)

The correct Python snippet to receive a Meraki webhook request is the one that uses the @app.route decorator with the correct endpoint and accepts the POST method since webhooks typically send data using HTTP POST requests. In this case, Option D is set up to accept POST requests which align with how webhooks operate. References := ( Automating Cisco Enterprise Solutions Official Cert Guide )