Pass the Cisco CCNP Data Center 300-620 Questions and answers with ExamsMirror

The L3Out subnet configuration option that creates an inbound route map for route filtering is Import Route Control Subnet3. This option allows for the application of route maps to incoming routes from external networks, providing granular control over which routes are allowed into the ACI fabric3.

An EPG is extended outside of the ACI fabric by statically assigning a VLAN ID to a leaf port in an EPG. This method maps the traffic received on the leaf port to the EPG, and the policy for this EPG is enforced

To filter the System Faults page and view only the active faults present in the Cisco ACI fabric, the two lifecycle stages that must be selected for filtering are:

Raised (Option A): This stage indicates that the fault is currently active and has been raised.

Raised, Clearing (Option D): This combination indicates that the fault is active but is in the process of being cleared.

When a bridge domain is configured with the hardware-proxy option for Layer 2 unknown unicast traffic, if the spine switch is unable to find the MAC address in the proxy database, it will drop the Layer 2 unknown unicast packet4. This behavior is controlled by the hardware proxy option associated with a bridge domain4.