Summer Certification Limited Time 70% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code = getmirror

Pass the Cisco CCNP Service Provider 350-501 Questions and answers with ExamsMirror

Practice at least 50% of the questions to maximize your chances of passing.

Exam 350-501 Premium Access

View all detail and faqs for the 350-501 exam

Go to Exam

728 Students Passed

90% Average Score

96% Same Questions

Viewing page 11 out of 11 pages

Viewing questions 151-165 out of questions

Questions # 151:

Question # 151

Refer to the exhibit. An engineering team must update the network configuration so that data traffic from router A to router D continues in case of a network outage between routers B and C. During a recent outage on the B-C link, the IGP traffic path was switched to the alternate path via routers E and F. but label forwarding did not occur on the new path. Which action ensures that traffic on the end-to-end path continues?

Options:

Configure the same hello timer values for IGP and LDP

Bind the BFD protocol with IGP on all routers

Enable LDP Session Protection on routers A and D.

Enable MPLS LDP IGP Synchronization on all routers

Questions # 152:

Which protocol does a Cisco MPLS TE tunnel use to maintain paths within the core?

Options:

RSVP

VTP

STP

RPF

Questions # 153:

What are two features of 6RD IPv6 transition mechanism? (Choose two.)

Options:

It inserts IPv4 bits into an IPv6 delegated prefix.

It uses a native IPv6-routed network between CE routers and the BR router.

It allows dynamic 1:N translation of IPv6 address.

It uses stateful automatic 6to4 tunnels between CE routers and the BR router.

It uses stateless automatic 6to4 tunnels between CE routers and the BR router.

Questions # 154:

Question # 154

Refer to the exhibit. A network engineer just upgraded the Cisco IOS XE Software to the newest version on OSPF routers R1 and R2, added the point-to-point network type under Gi0/0 on R2, and configured ip route 192.168.10.0 255.255.255.0 192.168.1.2 on R1. After the engineer restarted the routers, R1 entered the Exstart state with its neighbor, but the adjacency has not been established. Which action must the engineer take to resolve the issue?

Options:

Set the network type of the R2 OSPF interface to broadcast.

Add a static route toward 192.168.20.0 on R2.

Change the R2 OSPF router ID to 10.1.1.1.

Decrease the OSPF cost of the network on R2 to 10.

Questions # 155:

Question # 155

Refer to the exhibit. The network is running OSPF, and access to the internet is provided through router RB. Router RA connects to several servers that provide services to users connected to RC and RF. User traffic is growing, and the engineering team wants to mitigate the future potential for congestion when the servers are experiencing heavy use.

Which action must the team take to maintain better network performance?

Options:

Implement MPLS and install a Cisco MPLS TE tunnel to route high-priority traffic via a preferred path.

Implement ACLs to manage traffic flowing over individual links.

Implement class maps to categorize traffic and apply them to policies to manage traffic flow.

Implement OSPF point-to-point links to eliminate the need for DR election and the associated traffic.

Questions # 156:

Question # 156

Refer for the exhibit. To optimize network operations, the senior architect created this Python 3.9 script for network automation tasks and to leverage Ansible 4.0 playbooks. Devices In the network support only RFC 2617-based authentication What does the script do?

Options:

The script logs in via SSH and configures interface GigabitEthernetO/1 with IP address 10.1.131.112/30.

The script leverages REST API calls and configures Interface GlgabilEthemet0/1 with IP address 10.1.131.112/30.

The script performs a configuration sanity check on the device with IP address 172.168.211.65 via HTTP and returns an alert If the payload field falls to match.

The script parses the JSON response from the router at IP address 172 168.211.65 and checks If the interface GigaWtEthernet0/1 with IP address 10.1.131.112 exists on the router.

Questions # 157:

Question # 157

Refer to the exhibit. The network is configured with OSPF. A networking team just connected a streaming multicast server to router R7, and they now must enable access for users throughout the network to stream video from the server.

Which action must the team take so that users can stream video without overloading the network?

Options:

Implement PIM-DM on the link between the server and R7.

Implement PIM-SM on the LAN network connecting R5, R6, R3, and R4.

Implement PIM-SM on all routers and connected links.

Implement PIM-DM on all interfaces in the network except the LAN connection between R5, R6, R3, and R4.

Questions # 158:

Which set of facts must the network architect consider when deciding whether to implement SaltStack or Chef?

Options:

Chef is an agent-based on Ruby, and SaltStack is a module tool based on Python.

Chef refers to its automation instructions as manifests, and SaltStack refers to its instructions as a playbook.

Chef is written in Python, and SaltStack is written in Ruby.

Chef uses a message-based system, and SaltStack uses an agent to deliver messages

Questions # 159:

A network operator needs to implement PIM-SSM multicast configuration on customer's network so that users in different domains are able to access and stream live traffic. Which two actions must the engineer perform on the network

to make the streaming work? (Choose two.)

Options:

Configure at least one MSDP peer on the network

Enable IGMP version 2 at the interface lever.

Enable PIM sparse mode on the device.

Enable IGMP version 3 at the interface level.

Enable PM dense mode on the device.

Questions # 160:

A network engineer must enable the helper router to terminate the OSPF graceful restart process if it detects any changes in the LSA. Which command enables this feature?

Options:

nsf ietf helper disable

nsf cisco enforce global

nsf ietf helper strict-lsa-checking

nsf Cisco helper disable

Questions # 161:

An engineer working for a private service provider with employee id: 3994 37 650 is configuring a Cisco device to redistribute OSPF into BGP. Which task enables the device to filter routes?

Options:

Configure a distribute list and associate it to the BGP peer interface

Configure a prefix list and associate it to the BGP peer interface

Configure a route map and reference it with the redistribute command

Configure an access list and reference it with the redistribute command

Questions # 162:

What is the function of Cisco NFV infrastructure platform?

Options:

It does not have a security audit feature.

It does not offer high availability.

It offers consistent performance.

It offers decentralized logging.

Questions # 163:

A network administrator must monitor network usage to provide optimal performance to the network end users when the network is under heavy load. The administrator asked the engineer to install a new server to receive SNMP traps at destination 192.168.1.2. Which configuration must the engineer apply so that all traps are sent to the new server?