Pass the CWNP CWNA CWNA-109 Questions and answers with ExamsMirror

The response that you should give to your manager’s suggestion of implementing the security practices of disabling the broadcasting of the SSID in Beacons and configuring the access points not to respond to Probe Request frames that have a null SSID field is that any 802.11 protocol analyzer can see the SSID in clear text in frames other than Beacons frames. This negates any security benefit of trying to hide the SSID in Beacons and Probe Response frames. The SSID (Service Set Identifier) is a human-readable name that identifies a WLAN and allows users to connect to it. The SSID is transmitted in clear text in several types of 802.11 frames, such as Beacon frames, Probe Request frames, Probe Response frames, Association Request frames, Association Response frames, Reassociation Request frames, and Reassociation Response frames. Some people may think that hiding the SSID can improve the security of the WLAN by making it invisible to potential intruders. However, this is not true, as hiding the SSID only removes it from Beacon frames and Probe Response frames that have a null SSID field. The SSID is still present in other types of frames that can be easily captured and analyzed by any 802.11 protocol analyzer or wireless scanner tool. Therefore, hiding the SSID does not provide any real security benefit and may even cause some compatibility and performance issues for legitimate users. References: 1, Chapter 4, page 133; 2, Section 4.1

Granting access to specific network services or resources according to a user profile describes the authorization component of a AAA implementation. AAA stands for Authentication, Authorization, and Accounting, which are three functions that are used to control and monitor access to network resources and services. Authentication is the process of verifying that a user is who he says he is, by using credentials such as username, password, certificate, token, or biometric data. Authorization is the process of granting access to specific network services or resources according to a user profile, which defines the user’s role, privileges, and permissions. Accounting is the process of recording and reporting the usage of network services or resources by a user, such as the duration, volume, type, and location of the access. AAA can be implemented by using different protocols andservers, such as RADIUS, TACACS+, LDAP, Kerberos, or Active Directory. References: 1, Chapter 11, page 449; 2, Section 7.1

a mesh portal is a device that connects a mesh BSS (MBSS) to an Ethernet network, such as the Internet. A mesh portal acts as a bridge between the wired and wireless domains, and allows the mesh stations to communicate with external networks. A mesh portal is also a mesh point, which means it can forward traffic within the MBSS.

The other options are not correct. Option A. Mesh Gate is a device that connects a mesh BSS (MBSS) to another mesh BSS or another wireless network, such as an infrastructure BSS or an ad hoc network2. A mesh gate acts as a gateway between different wireless domains, and allows the mesh stations to communicate with other wireless networks. A mesh gate is also a mesh point, which means it can forward traffic within the MBSS. Option B. Mesh Switch is not a valid term in the 802.11 standard. Option C. Mesh Router is also not a valid term in the 802.11 standard.

Based on the information given, what can be determined as certainly true about this AP is that it has 4 radio chains. A radio chain is a hardware component that consists of an antenna, a radio frequency (RF) amplifier, and a transceiver. The number of radio chains indicates how many spatial streams an AP can transmit or receive simultaneously using Multiple Input Multiple Output (MIMO) technology. The notation x:y:z in an AP specification denotes the number of radio chains (x), the number of spatial streams (y), and the number of spatial streams per band (z). Therefore, a tri-band, 4x4:4, Wi-Fi 6, 802.11ax AP has four radio chains in each of its three bands (2.4 GHz, low 5 GHz, and high 5 GHz). It also supports four spatial streams in total and four spatial streams per band. It cannot be determined as certainly true that it supports four channels in each band, UL-MU-MIMO, or uses a modified OpenWRT firmware based on the information given. References: [CWNP Certified Wireless Network Administrator Official Study Guide: ExamCWNA-109], page 223; [CWNA: Certified Wireless Network Administrator Official Study Guide: ExamCWNA-109], page 213.

DHCP (Dynamic Host Configuration Protocol) is a commonly used method to locate the controllers by the APs in a WLAN that is implemented using wireless controllers. DHCP is a protocol that allows a device to obtain an IP address and other network configuration parameters from a server. In a wireless controller scenario, the APs can use DHCP to request an IP address from a DHCP server, which can also provide the IP address or hostname of the wireless controller as an option in the DHCP response. This way, the APs can discover the wireless controller and establish a connection with it. Alternatively, the APs can also use other methods to locate the wireless controller, such as DNS (Domain Name System), broadcast or multicast discovery, or manual configuration. References: 1, Chapter 8, page 309; 2, Section 5.2

Airtime Utilization is a per-channel statistic that defines what percentage of the channel is currently being used, and what percentage is therefore free. Airtime usage can come from: Data traffic to and from client devices. Interference from WiFi and non-WiFi sources. Management overhead from APs and client devices.https://wyebot.com/2019/06/06/understanding-airtime-utilization/

The least expensive solution available for increasing throughput for these users without implementing configuration options that are not recommended is to use a 40 MHz channel on the 5 GHz radio. This solution can double the channel bandwidth and increase the data rates for the 5 GHz capable 802.11ac clients. Using a 40 MHz channel on the 5 GHz radio is also less likely to cause co-channel interference or overlap with other channels than using a 40 MHz channel on the 2.4 GHz radio, which has only three non-overlapping channels. Using a 160 MHz channel on the 5 GHzradio may provide even higher throughput, but it may also consume too much of the available spectrum and cause more interference with other devices or networks. Installing a second AP in the coverage area may also improve the throughput, but it may require additional costs and configuration. References: [CWNP Certified Wireless Network Administrator Official Study Guide: ExamCWNA-109], page 216; [CWNA: Certified Wireless Network Administrator Official Study Guide: ExamCWNA-109], page 206.

OFDM (Orthogonal Frequency Division Multiplexing) is the physical layer specification (PHY) that VHT capable devices must be backward compatible with according to the IEEE 802.11-2012 standard. VHT (Very High Throughput) is aPHY and MAC enhancement that is defined in the IEEE 802.11ac amendment and is also known as Wi-Fi 5. VHT operates only in the 5 GHz band and uses features such as wider channel bandwidths (up to 160 MHz), higher modulation schemes (up to 256-QAM), more spatial streams (up to eight), multi-user MIMO (MU-MIMO), beamforming, and VHT PHY and MAC enhancements. VHT can achieve data rates up to 6.9 Gbps.

According to the IEEE 802.11-2012 standard, VHT capable devices must be backward compatible with devices using OFDM PHY, which is defined in the IEEE 802.11a amendment and is also used by IEEE 802.11g, IEEE 802.11n, and IEEE 802.11h amendments. OFDM operates in both the 2.4 GHz and 5 GHz bands and uses features such as subcarriers, symbols, guard intervals, and OFDM PHY and MAC enhancements. OFDM can achieve data rates up to 54 Mbps.

Backward compatibility means that VHT capable devices can interoperate with OFDM devices on the same network by using common features and parameters that are supported by both PHYs. For example, VHT capable devices can use a channel bandwidth of 20 MHz, a modulation scheme of BPSK, QPSK, or 16-QAM, one spatial stream, no beamforming, and OFDM PHY and MAC headers when communicating with OFDM devices. Backward compatibility also means that VHT capable devices can fall back to OFDMmode when the signal quality or SNR is too low for VHT mode. References: 1, Chapter 3, page 123; 2, Section 3.2

An IEEE 802.11 amendment is a proposed change or addition to the existing 802.11 standard, which defines the specifications and protocols for wireless LANs. An amendment goes through several stages of development, such as draft, sponsor ballot, and final approval, before it is ratified by the IEEE Standards Association and becomes part of the standard. Until then, it has no official impact on the standard, although some vendors may release products based on draft amendments to gain a competitive edge or to influence the final outcome of the amendment . References: [CWNA-109 Study Guide], Chapter 1: Overview of Wireless Standards, Organizations, and Fundamentals, page 25; [CWNA-109Study Guide], Chapter 1: Overview of Wireless Standards, Organizations, and Fundamentals, page 23; [IEEE website], IEEE-SA Standards Development Process.

In addition to coverage analysis results, what should be included in a post-deployment site survey report to ensure WLAN users experience acceptable performance is Capacity analysis results. Capacity analysis is a method of testing the ability of the WLAN to support the expected number and type of users, devices, and applications. Capacity analysis can help to determine the optimal number and placement of access points, the appropriate channel and power settings, the required QoS policies, and the expected throughput and latency levels. Capacity analysis results can help to verify that the WLAN meets the performance requirements and service level agreements (SLAs) of the organization. References: [CWNP Certified Wireless Network Administrator Official Study Guide: ExamCWNA-109], page 548; [CWNA: Certified Wireless Network Administrator Official Study Guide: ExamCWNA-109], page 518.