Pass the Fortinet Certified Solution Specialist FCSS_LED_AR-7.6 Questions and answers with ExamsMirror

In an SD-Branch deployment (FortiGate + FortiSwitch + FortiAP),FortiAIOps:

Collects telemetry and logs from Fabric devices

Usesmachine-learning / AI analyticsto:

Spot anomalies (latency, packet loss, RF issues, misconfigurations)

Highlight root causes

Proposeoptimization recommendations(e.g., channel changes, power tuning, config fixes)

It doesnot:

Automatically disable devices (Afalse)

Replace SD-WAN config or all routing (Cfalse)

Fixallissues with zero human input (Dis marketing fantasy, not reality)

From theWTP profile:

set handoff-rssi 30

set handoff-sta-thresh 30

config radio-1

set band 802.11n-2G

set vaps "Student01"

config radio-2

set band 802.11ac-5G

set darrp enable

set arrp-profile "arrp-default"

set vaps "Student01"

Key points:

Same SSID (Student01)is broadcast onboth APsand onboth bands(2.4 and 5 GHz).

handoff-sta-thresh 30 enablesclient load-balancingbetween APs:

When an AP radio hasmore than 30 associated clients, it starts rejecting new associations so that clients connect to a neighboring AP instead (as long as RSSI is still acceptable).

Current client counts:

AP1:32 clients on 5 GHz, 22 on 2.4 GHz

AP2:12 clients on 5 GHz, 20 on 2.4 GHz

So on 5 GHz:

AP1’s 5-GHz radioexceedsthe 30-client threshold (32 > 30) → it will try topush new clients away.

AP2’s 5-GHz radio iswell belowthe threshold (12 clients) and will happily accept new clients.

The new dual-band client is seen at:

–33 dBmby AP1

–43 dBmby AP2

Even though AP1 has the stronger signal, its 5-GHz radio is already overloaded according to the configured threshold, so AP1 will refuse association attempts from that client. The client will then associate toAP2’s 5-GHz radio, which:

Hasfewer clients(better airtime per device), and

Still has an acceptable signal (–43 dBm is easily usable on 5 GHz).

That matches optionCexactly.

Other options are incorrect because they ignore the configuredclient-load-balancing thresholdsand assume association based purely on RSSI or prefer 2.4 GHz, which is not what this profile is tuned to do.