Pass the HPE ATP - Hybrid IT Solutions V2 HPE0-V14 Questions and answers with ExamsMirror

A customer needs to connect two switches without VLANs or Spanning Tree. To which mode should the switches be set?

You are designing a solution to run a Citrix XenDesktop workload.

Which HPE planning and designing resource contains a detailed example of this type of solution, including a list of all the hardware and software components?

A customer requires a storage platform for their department data. They have a limited budget and will be sharing files among their Microsoft Windows environment.

Which HPE storage platform meets the customer’s needs?

You are installing HPE ProLiant servers into a rack that will be fully loaded. You also need to install four power distribution units (PDUs) in the rack.

How should you install the PDUs to maximize power distribution and space efficiency?

A customer needs to replace an existing storage array. The new array must be suitable for remote office deployment and support the following:

Multi-protocol connectivity

Flash-accelerated storage

Low-cost midline SAS drives

Which HPE storage platform will meet these requirements?

A customer needs to update firmware and perform diagnostic tests on various components of a HPE ProLiant server.

Which utility should they use?

A customer needs to reconfigure their data center network because their network often becomes congested, and the customer cannot monitor the network.

How should the customer configure their network?

A customer is considering an upgrade of their network, which connects 10 servers. The customer has a converged data center networking architecture with Layer 2 and Layer 3 functionality. Which HPE product family will meet this customer’s needs?

you are designing a system for a customer that runs an OLTP application. The customer has SAN based storage. They need to accelerate application performance.

Which HPE ProLiant Gen10 feature set will address this customer’s needs?

A customer plans to use HPE ProLiant servers for an application that requires low latency for all components.

Which workload profile should the customer use?