Pass the HP Aruba Certified Switching Expert HPE7-A08 Questions and answers with ExamsMirror

OSPF neighbors not forming adjacency and stuck in the 2WAY state typically indicates that the interface is set to passive mode, preventing OSPF Hello packets from being sent or received on that interface.

Removing passive mode on VLAN 182 allows OSPF Hello messages to be exchanged and adjacency to form.

Options involving network type or costs do not affect adjacency states related to passive interfaces.

The max-metric router-lsa on-startup affects LSA advertisements, not adjacency formation.

Therefore, the fix is to configure no passive-interface vlan182.

In the exhibit, the CX8325 switch ports 1/1/47 and 1/1/48 are connected in a VSX setup. According to Aruba VSX best practices, ports on the CX8325 switch that serve as ISL or VSX interconnects should use SFP28 optics for 25Gbps links. If SFP56 optics are used, it would be incorrect because CX8325 ports are designed to support SFP28 modules for these speeds.

CX6300 ports use SFP56 or QSFP28 depending on model and link speed.

CX8300 series ports designed for QSFP28 for higher speeds.

Hence, the best practice is to use SFP28 on CX8325 for the interconnect links.

DHCP snooping requires to be enabled globally before it will function correctly. If it is not enabled globally, even if enabled on VLAN interfaces, DHCP snooping will not work.

Enabling authorized DHCP servers (A) or trusted interfaces (B) is necessary but only after global enabling.

Enabling DHCP snooping on VLAN (C) is not sufficient without global enablement.

Therefore, enabling DHCP snooping globally is the first step to activate the feature.

The LACP fallback command in Aruba VSX configurations allows the system to continue forwarding traffic even if LACP negotiation fails or is not established. This is useful when provisioning a gateway or link that does not support LACP, ensuring that the port remains operational in a static manner.

It is not specifically for backward compatibility with LACP v1.

It does not relate to operation with a single partner interface.

It also is not about active/passive LACP modes per se.

Therefore, LACP fallback is configured to support provisioning a gateway without LACP.

The Aruba CX switches REST API supports the JSON (JavaScript Object Notation) data format for both requests and responses. JSON is widely adopted for REST APIs due to its lightweight and readable format.

XML and YAML are not supported for REST API on CX switches.

SOAP is a different protocol not used by Aruba CX REST API.

Therefore, JSON is the correct and supported data format.

After enabling ARP protection, many users lose network access because ARP protection relies on DHCP snooping to build IP-to-MAC binding tables. Without DHCP snooping enabled and correctly configured, ARP inspection cannot verify ARP packets, causing legitimate traffic to be dropped.

Enabling DHCP snooping allows ARP inspection to validate ARP requests and responses.

Other options like dynamic IP lockdown, IGMP snooping, or DHCP reservations are unrelated or secondary.

To avoid split-brain scenarios in VSF stacks, the VSL split-detect mgrep command is used to enable multicast group detection over the Virtual Switching Link (VSL). This helps detect when the stack links are down or partitioned, triggering appropriate failover or shutdown mechanisms.

Options like vsf start-auto-stacking, vsf secondary-member 2, or vsf conductor-member 2 are related to stack initialization and member roles but do not address split-brain detection directly.

Hence, enabling split-detect with mgrep is the best practice for VSF stack stability.

For multicast to function efficiently on Aruba CX access switches, IGMP snooping needs to be enabled on the VLAN interfaces. IGMP snooping listens to IGMP join and leave messages between multicast clients and routers to allow the switch to forward multicast traffic only to interested ports, reducing unnecessary multicast flooding.

PIM is a multicast routing protocol and usually configured on routing devices, not access switches.

IGMP (without snooping) enables hosts to signal interest but does not control traffic forwarding at the switch layer.

Enabling IGMP snooping on SVI alone may not be sufficient; it should be enabled on VLANs that carry multicast clients.

Hence, enabling IGMP snooping on VLAN is necessary for efficient multicast traffic flow.

Comprehensive Detailed Explanation:

When troubleshooting intermittent connectivity issues with known source and destination IPs, the Follow the path methodology is most suitable. This involves tracing the packet flow from source to destination step-by-step, checking each device or segment for failures.

Spot the difference compares configurations, which is less targeted here.

Divide and conquer isolates sections but follow the path is more direct for connectivity.

Top-down/bottom-up is more general troubleshooting.

When creating a device profile for an AP (Access Point) on Aruba CX switches, two essential configuration tasks include:

Associating a role (Option A): This assigns specific permissions and access levels to the AP.

Associating an LLDP group (Option C): LLDP groups define the LLDP settings for the AP, critical for device discovery and network management.

Other options like QoS policy, VLAN, or ACL associations are typically handled separately or at the VLAN or policy level.