Pass the Huawei HCIA-Datacom H12-811_V1.0 Questions and answers with ExamsMirror

In IPv6, addresses with the FE80::/10 prefix are Link-Local Addresses.

Option A (Incorrect - Global unicast address): These have prefixes such as 2000::/3.

Option B (Incorrect - Multicast address): Multicast addresses start with FF00::/8.

Option C (Correct - Link-local address): FE80::/10 is reserved for Link-Local addresses, used for communication within a local link.

Option D (Incorrect - Anycast address): Anycast addresses are assigned to multiple interfaces but are not identified by a specific prefix.

Thus, the correct answer is C.

Comprehensive Explanation: When Router A forwards the packet to Router B, the destination IP address (11.0.12.1) remains unchanged as it is still meant for Host B. However, the destination MAC address changes to MAC-B, which belongs to Host B, since MAC addresses are only used for local network hops​

In DHCP (Dynamic Host Configuration Protocol):

The client starts renewal at 50% (0.5) of the lease time to extend its lease with the DHCP server.

If unsuccessful, it tries again at 87.5% (0.875) before the lease expires.

Option A (Incorrect - 0.875): This is the second attempt if the first renewal fails.

Option B (Correct - 0.5): The first renewal attempt occurs when the lease reaches 50% of its duration.

Option C (Incorrect - 0.25): No renewal attempt happens at 25%.

Option D (Incorrect - 1): At 100% lease expiration, the IP is released and a new request is needed.

Thus, the correct answer is B.

Comprehensive and Detailed Explanation:

Spanning Tree Protocol (STP) prevents switching loops in networks with redundant links by:

Blocking certain links while still maintaining redundancy.

Preventing broadcast storms and MAC table instability.

Reactivating backup links if the primary link fails.

✅ Reference: HCIA-Datacom Switching Guide – STP Loop Prevention

Huawei devices support different authentication modes:

authentication-mode local: Requires a username and password stored locally.

authentication-mode hwtacacs: Uses Huawei TACACS+ authentication, which requires a username and password.

authorization-mode hwtacacs: Refers to authorization (not authentication).

authentication-mode none: Does not require a username or password, meaning no authentication is needed.

Thus, the correct answer is D.

Comprehensive and Detailed Explanation:

IPv6 supports several extension headers:✅ Fragment Extension Header → Handles packet fragmentation.✅ Destination Options Header → Stores information for destination nodes.✅ Hop-by-Hop Options Header → Used for router-specific instructions.

❌ Incorrect Option:

VLAN extension header does not exist in IPv6. VLAN tagging is handled at Layer 2 (Ethernet).

✅ Reference: HCIA-Datacom Network Principles Guide – IPv6 Packet Structure

Detailed Explanation:In Huawei's VRP (Versatile Routing Platform) command-line interface, when files are deleted using the delete or delete /unreserved command, they are moved to the recycle bin rather than being permanently deleted. To permanently delete these files, they need to be removed from the recycle bin using the reset recycle-bin command​​.

Understanding Loops in Layer 2 Networks:

Layer 2 switches flood broadcast and unknown unicast packets.

If there is a loop, these packets can circulate indefinitely, leading to a broadcast storm.

Consequences of Broadcast Storms:

High CPU usage on network devices.

Degraded network performance or complete failure.

Solution:

Spanning Tree Protocol (STP) is implemented to prevent loops by selectively blocking redundant links.

Conclusion:

Since loops lead to broadcast storms, the statement is TRUE.

References: HCIA-Datacom V1.0 Certification Guide, Chapter 8: Spanning Tree Protocol.