Pass the Huawei HCIE-Storage H13-629_V2.5 Questions and answers with ExamsMirror

Which of the following statemetns is correct about RAID10 and RAID5 performance? (multiple choice)

Which of the following descriptions of the import parameters for the physical tape of the VTL6900 is correct?

Which commands are used to view SCSI controller information in RHEL5.5 (with Qlogic QLE2562-CK inside)?

Using Simpana to achieve a complete Exchange backup requires at least which of the following components? (Multiple choice)

In a synchronous replication scenario, an application's peak write throughput is 16 MB/s, average write throughput is 500 KB/s, average write 1/0 size is 8 KB, private information overhead is about 11%, and the FC network bandwidth utilization rate is 70%. The throughput of the disaster recovery network must be at least ( ).

True or false, with RedHat 6 using the storage array Huawei S5500T, when the storage array and the host are directly connected, the storage array host port can select a P2P network topology.

When designing SQL server database disaster recovery, the calculation of disaster recovery capacity must consider which of the following file size? (multiple choice)

A physical standby database is kept synchronized with the primary database, through Redo Apply, which recovers the redo data received from the primary database and applies the redo to the physical standby database. Which of the following disaster recovery technologies is working as the above statement?

An N8000 file system can be used when offline command to query file system flag:

echo "8192B.p S" | fsdb -t vxfs / dev / vx / rdsk / sfsdg / sfsvol | grep flag

Where sfsvol is the name of the file system and may appear as flsgs 0 mod 0 Clean 3c or flags 4000 mod clean 3c if flags last bit is 0, then the file system is set.

With Simpana in a multi-card, multi-network environment, you can use the data interface data interface pairs (DIP) to set the data from the source end-to-end network transmission path. Source and destination can use the host name and IP address to describe the network interface.

There are multiple network connections that can be configured to send multiple concurrent data streams. Based on this, which of the following configuration methods should be used? (multiple choice)