Spring Special Limited Time 70% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code = getmirror

Pass the Huawei HCIE-Storage H13-629_V2.5 Questions and answers with ExamsMirror

Practice at least 50% of the questions to maximize your chances of passing.
Exam H13-629_V2.5 Premium Access

View all detail and faqs for the H13-629_V2.5 exam

Go to Exam

651 Students Passed

87% Average Score

97% Same Questions
Viewing page 6 out of 11 pages
Viewing questions 51-60 out of questions
Questions # 51:

True or False, with a client using the SMB 1.0 / 2.0 / 2.1 / 3.0 protocol to perform file replication inside a Huawei OceanStor 9000, it does not need to pass through the client, but can be done directly to the system.

Options:

A.

True

B.

False

Questions # 52:

A banking business running background storage system requirements are as follows:

(1) Business Impact. The business impact generated by the operating system is about 100KB.

(2) The service operation system is the whole GE network. The server and operating system are GE network. Follow-up to consider the business needs to upgrade to 10GE.

(3) Only requires 72TB of total space, the latter expansion priority to expand the disk

(4) Only 20U of rack space is reserved for the current storage devices.

The configuration of three nodes and switches is prioritized to meet the requirements of the machine room. Cabinet planning based on the above requirements.

What are the more appropriate networking solutions?

Options:

A.

Program One:1 * OceanStor 9000 C Node36 * 2TB SATA configuration2 * Front-end GE + 2 * Rear-end 10GE

B.

Scenario 2: 3 * Oceanstor 9000 C Node36 * 2TB SATA hard drive;2 * Front-end GE + back-end 2 * 10GE

C.

program three:3 * OceanStor 9000 P Node36 * 2TB SAS configuration2 * Front-end GE + 2 * Rear-end 10GE

D.

Program Four:3 * OceanStor 9000 M Node36 * 2TB SAS configuration2 * Front-end GE + 2 * Rear-end 10GE

Questions # 53:

In an HPUX system, you use the lv image lvreduce or lvsplit command / dev / vg01 / lv - test within a mirror. Which command will test the implementation of the following command lvsplist / dev / vg01 / lv -, using vgdisplay-v system to see what the lv is.

Options:

A.

LV-test

B.

lv-testa

C.

lv-testb

D.

lv-testbackup

Questions # 54:

When the database is protected and the virtual snapshots are used from the end to verify LUN data consistency on the production end and the disaster recovery end. However, the disaster recovery end of the LUNd database can not be started normally. What is the possible reason? (Multiple choice.)

Options:

A.

After a snapshot of the LUN of the redundancy site is created, the snapshot is not activated at the same time.

B.

Disaster recovery storage side of the database resides in the cache has not been written to the hard disk.

C.

When creating a snapshot on the disaster recovery end LUN, the production end is copying data to the disaster recovery end.

D.

The production end and disaster recovery end adopt the disaster recovery solution of incremental LUN copy. The incremental data is abnormally interrupted during the synchronization process and has not been repaired.

Questions # 55:

Simpana client failed to the perform backup task. When you view the task status, it reports the following error: libary mediaagent drive pool media

[]: Mount path is offlline advice: please check if the mount path is online and accessible "

What can cause this?

Options:

A.

Client offline

B.

Media Server Offline

C.

The client can not resolve the media server host name

D.

backup media failure

Questions # 56:

The client environment is the HP-UX11i v2 operating system, the HBA is the AD193A, and the operating system comes with the driver. The storage array is Huawei OceanStor V3. When the LUN mapping between HP-UX and the storage system is completed, you can not change the topology mode of the FC host interface card on the storage system.

Options:

A.

True

B.

False

Questions # 57:

Which of the following copy is supported by OceanStor V3 remote file system?

Options:

A.

Synchronous and asynchronous replication

B.

Simultaneous replication

C.

Asynchronous replication

D.

support multiple file system consistency replication

Questions # 58:

In order to verify the consistency of the slave LUN data with the source data and to protect slave LUN data, which of the following descriptions is incorrect:

Options:

A.

Create a virtual snapshot of the slave LUN and activate it, then map the snapshot LUN to the host for authentication.

B.

After the snapshot LUN is mapped to the host, the host can read and write the snapshot LUN.

C.

After the verification is completed, stop the upper-layer service application, release the LUN mapping, and finally delete the snapshot.

D.

Stop the snapshot before the host can write snapshot LUN.

Questions # 59:

Which of the following is not part of the storage troubleshooting process?

Options:

A.

Manually clear the NMS alarm and turn off the alarm light.

B.

Observe the symptom and collect the fault information.

C.

Troubleshoot according to the "Event Reference" or "Troubleshooting" manual.

D.

Maintain the faulty environment and contact technical engineer for support.

Questions # 60:

In a A VTL6900-I system, the backup server connected to it is the Linux operating system. The backup server and the VTL6900-I system are directly connected through the FC.

The server identifies the device information as shown below. After the backup server is configured as a backup client for the VTL6900-I system and the backup VTL system on the server virtual library process, which the following operation and description is correct:

(Multiple choice.)

Options:

A.

When configuring the backup client on the VTL side, you need to know that the WWPN of the FC port that connects the VTL to the VTL is available on the server in the sys /class / fc_host directory and subdirectory to the corresponding WWPN port.

B.

Server-side identification has been detected with the library device command is cat / proc / scsi / scsi.

C.

As shown in the figure, among the devices identified on the server side, the device labeled 1 is the scanned library.

D.

As shown in the figure, of the devices identified on the server side, the device labeled 2 is the information for the scanned tape.

Viewing page 6 out of 11 pages
Viewing questions 51-60 out of questions
TOP CODES

TOP CODES

Top selling exam codes in the certification world, popular, in demand and updated to help you pass on the first try.

2V0-11.25
ADM-201
Agentforce-Specialist
CMMC-CCP
Data-Cloud-Consultant
PDI
PSE-Strata-Pro-24
Secure-Software-Design
Sharing-and-Visibility-Architect
Workday-Pro-Integrations
ZDTA