Weekend Special Limited Time 70% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code = simple70

Pass the Huawei HCIP-Access H35-211_V2.5 Questions and answers with ExamsMirror

Practice at least 50% of the questions to maximize your chances of passing.
Exam H35-211_V2.5 Premium Access

View all detail and faqs for the H35-211_V2.5 exam


508 Students Passed

94% Average Score

96% Same Questions
Viewing page 1 out of 2 pages
Viewing questions 1-10 out of questions
Questions # 1:

Under the H.248 protocol, if the signaling IP and media IP are both 10. 1. 1. 100/8, voice gateway is 10. 1. 1. 1. When configuring voIP service, the following command is incorrect

Options:

A.

Using the command ip address media10 in voip mode. 1. 1. 10010. 1. 1. 1 Configure the media IP

B.

Use the reset coldstart command under Voice Interface to make the interface property configuration take effect

C.

Use the if-h248 attributei command to configure interface properties under the voice interface

D.

Using the command ip address signaling10 in voip mode. 1. 1. 10010. 1. 1. 1 Configure the signaling IP

Questions # 2:

The establishment, maintenance and dismantling of the word path between the SIP user and the server are done through the interaction of the --series of messages, so that every information contained in the SIP text has a --nature, There is no phenomenon in which a single information value appears multiple times.

Options:

A.

wrong

B.

Right

Questions # 3:

The scope of protection of the (multiple choice) GPON Type B dual attribution protection includes

Options:

A.

Primary and standby OLTs

B.

Primary and standby primary thousand fibers

C.

OlT's primary and standby PON should be ports

D.

Primary and standby branch fibers

Questions # 4:

(Radio) When the invitation message sent by user A reaches user B after passing through server C, D, E, the message received by user B is VIA. The server address of the field information record is in descending order.

Options:

A.

C->D->E

B.

E->C->D

C.

E->D->C

D.

C-E->D

Questions # 5:

(Single) A total of 100 multicast users on OLT are watching 20 multicast programs, assuming that each multicast program occupies 2M bandwidth, then how much multicast traffic is currently on the OLT upstream port

Options:

A.

200M

B.

100M

C.

40M

D.

50M

Questions # 6:

The (radio) OLT is configured for V2 on the IGMP version when the OLT receives igmr v3 forwarded from on-T What kind of treatment will be done after joining the message

Options:

A.

Normal forwarding

B.

Send a specific group query message

C.

Send a universal group query message

D.

Discard directly

Questions # 7:

The Class D multicast address range is from 224. 0. 0. 0 to 238. 255. 255. 255。

Options:

A.

True

B.

False

Questions # 8:

(Radio) Which of the following options can improve the service experience of multicast users when switching channels (switching time is shorter)

Options:

A.

When adding a multicast program, the prejoin feature is disabled

B.

Enables the Quick Leave feature when adding a multicast user

C.

When you add a multicast user, enable the preview feature

D.

Use group addresses with small values

Questions # 9:

The maximum spectroscopic ratio supported by 10G EPON is?

Options:

A.

1: 256 (Laboratory).

B.

1:32

C.

1:128

D.

1:64

Questions # 10:

(Multi-select) Use 0TDR to locate the abnormally attenuated location in the optical path, and after the OTDR is connected to the detected line, which of the following parameters can be set.

Options:

A.

Set the measurement range

B.

Set the wavelength

C.

Set the mode

D.

Sets the pulse width

Viewing page 1 out of 2 pages
Viewing questions 1-10 out of questions
TOP CODES

TOP CODES

Top selling exam codes in the certification world, popular, in demand and updated to help you pass on the first try.