Pass the Huawei HCSA-Field-Transmission H35-260 Questions and answers with ExamsMirror

Perform inspection tasks from the batch of relevant information obtained from NEs

Collect network element performance data for inspection

Support viewing inspection results and importing and exporting inspection data.

Generate an inspection report according to the passing of inspection items and analyze the situation.

35G

58.75G

80G

155G

MPLS Pin A.

CC

LT

MPLS Tracert

Before testing, you need to set the 1:1 linear multiplex section protection mode to single-ended switching.

During the protection switching of the linear multiplex section, the NE reports the APS_INDI and MS_APS_INDI_EX alarms

SNCP protection is configured. When the laser of the interface connected to the opposite end is turned off, observe the SDH analyzer of the local end.

There are two methods for testing the protection switching of the multiplex section: the single-ended loopback test method and the double-ended hanging meter

test method

Topology Management

Performance Management

Alarm Management

End-to-end business management

Resource management

0DU3 SNCP

Tributary SNCP

SW SNCP

In-board 1+1

Static mode

Dynamic Mode

Manual Mode

Auto Mode

Solve the problem of increasingly scarce public network VLAN ID resources

Users can plan their own private network VLAN ID

Provide a simpler L3VPN solution

Make the user network more independent

8

10

12

14

After the logical fiber connection is completed, no path search operation is required, and the OTS path and OMS path can be automatically generated

When the Och service path exists, create an OTUk path directly, and the network management can automatically create the OTUk path

If there is an Och service path, you can first search for the OTUk path, create the ODUk service layer path, and then create the Client path.

When the Och service path exists, directly create the OTUk path, and the network management can automatically create the OTUk and 0DUk paths.