Spring Special Limited Time 70% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code = getmirror

Home
Huawei
HCSA-Field-Transmission
H35-260
HCSA-Field-Transmission & PTN V1.0 Questions and Answers

Pass the Huawei HCSA-Field-Transmission H35-260 Questions and answers with ExamsMirror

Practice at least 50% of the questions to maximize your chances of passing.

Exam H35-260 Premium Access

View all detail and faqs for the H35-260 exam

Go to Exam

664 Students Passed

89% Average Score

98% Same Questions

Viewing page 9 out of 10 pages

Viewing questions 81-90 out of questions

Questions # 81:

L--16.1 indicates the type of optical interface. Which of the following descriptions is correct?

Options:

Short distance communication, the signal level is STM-1 and the working window is 1310nm

Long distance communication, the signal level is STM-1 and the working window is 1310nm

Short distance communication, the signal level is STM-16 and the working window is 1550nm

Short-distance week-to-week communication, the signal level is STM-16 and the working window is 1310nm

Answer

Questions # 82:

Which of the following items belong to the debugging work of the playback system?

Options:

Commissioning the protection function

Commissioning feature function

Debugging Errors

Optical power commissioning

Cabinet Installation

Answer

A, B, C, D

Questions # 83:

When deploying ring network protection in the PTN7900 network, which items are wrong?

Options:

Ring network protection and LSP APS protection can be configured at the same time

The tunnel that carries the service needs to be bound to the ring network, so that the ring network can protect the service

The east-west interface bandwidth of the ring network must be consistent, otherwise the ring network cannot be deployed

When configuring a ring network, the east-west interfaces of the ring network can be on the same board

Answer

C, D

Questions # 84:

Which of the following boards can be inserted into the OSN 9800U64 subrack?

Options:

TN18LSC

TNV1N401

TN54GS4

TNF5UNQ2

Answer

Questions # 85:

When the NE reports the TUNNEL_APS_OUTAGE alarm, what does it mean?

Options:

Tunnel protection group is degraded and the availability of the protection group is reduced

The tunnel protection group is interrupted, and the bearer services are interrupted

The tunnel protection group is switched, and the working channel is unavailable

The tunnel protection group is switched and the protection channel is

unavailable

Answer

Questions # 86:

Which of the following statements about the FEU board is false?

Options:

The FIU board does not process monitoring information

The FIU can complete the access and release of the OSC channel

Using ESC, OTM station needs a FIU

Using OSC, both OLA station and OADM station need two FIUs

Answer

Questions # 87:

Which of the following is the service board type Y of MSTP equipment

Options:

Interface board

Service Processing Board

Service processing board with interface

Auxiliary board

Answer

A, B, C

Questions # 88:

Which of the following ways does the Inspector inspection tool support adding network elements?

Options:

Automatically discover network elements

Manually add network elements

NEs actively report

Import network elements in batches

Answer

B, D

Questions # 89:

Which of the following descriptions about routing loops is wrong?

Options:

Routing loops may occur when different routing domains import routes from each other

Routing loops can only be generated by dynamic routing protocols

Routing loops prevent packets from reaching their destination correctly and cause link congestion

The packet is routed circularly between two or more routers until the TTL is reduced to 0 and

discarded

Answer

Questions # 90:

Set up the alarm to report automatically, and report the alarm on the device side immediately after the alarm is generated. The alarm board pops up on the network management system. The user can view the alarm information in the alarm board, and does not need to

actively search for words. Unnecessary alarms can be set to not be automatically reported. At this time, the alarm will no longer be reported to the network, even if the synchronization operation is performed.