Pass the ISC Other Certification CSSLP Questions and answers with ExamsMirror

You will most probably find this information in the Service Level Agreement document. Amongst other information, SLA contains information about the agreed Service Hours and maintenance slots for any particular Service. Service Level Agreement (frequently abbreviated as SLA) is a part of a service contract where the level of service is formally defined. In practice, the term SLA is sometimes used to refer to the contracted delivery time (of the service) or performance. Service Level Agreement (SLA) is a negotiated agreement between two parties where one is the customer and the other is the service provider. This can be a legally binding formal or informal 'contract'. Contracts between the Service Provider and other third parties are often (incorrectly) called SLAs, as the level of service has been set by the (principal) customer there can be no 'agreement' between third parties (these agreements are simply a 'contract'). Operating Level Agreements or OLA(s) however, may be used by internal groups to support SLA (s).

Answer: B is incorrect. Release Policy is a set of rules for deploying releases into the live operational environment, defining different approaches for releases depending on their urgency and impact. Answer: C is incorrect. The Service Level Requirements document contains the requirements for a service from the client viewpoint, defining detailed service level targets, mutual responsibilities, and other requirements specific to a certain group of customers. Answer: D is incorrect. Underpinning Contract (UC) is a contract between an IT service provider and a third party. In another way, it is an agreement between the IT organization and an external provider about the delivery of one or more services. The third party provides services that support the delivery of a service to a customer. The Underpinning Contract defines targets and responsibilities that are required to meet agreed Service Level targets in an SLA.

Preventive controls are the security controls that are intended to prevent an incident from occurring, e.g., by locking out unauthorized intruders. Answer: C is incorrect. Detective controls are intended to identify and characterize an incident in progress, e.g., by sounding the intruder alarm and alerting the security guards or police. Answer: A is incorrect. Corrective controls are intended to limit the extent of any damage caused by the incident, e.g., by recovering the organization to normal working status as efficiently as possible. Answer: B is incorrect. There is no such categorization of controls based on time.

The various patterns applicable to software assurance in general are as follows: Hidden implementation: It limits the ability of an attacker to distinguish the internal workings of an application. Partitioned application: It splits a large and complex application into two or more simple components. Secure assertion: It distributes application-specific sanity checks throughout the system. Server sandbox: It creates a wall around the Web server to include the damage that occurs because of an undetected fault in the server or an exploited vulnerability.

The Information Protection Policy (IPP) is defined as a source document, which is most useful for the ISSE when classifying the needed security functionality. The IPP document consists of the threats to the information management and the security services and controls needed to respond to those threats. Answer: B is incorrect. The IMM is the source document describing the customer's needs based on identifying users, processes, and information. Answer: C is incorrect. The System Security Context is the output of SE and ISSEP. It is the translation of the requirements into system parameters and possible measurement concepts that meet the defined requirements. Answer: D is incorrect. The Concept of Operations (CONOPS) is a document describing the characteristics of a proposed system from the viewpoint of an individual who will use that system. It is used to communicate the quantitative and qualitative system characteristics to all stakeholders. CONOPS are widely used in the military or in government services, as well as other fields. A CONOPS generally evolves from a concept and is a description of how a set of capabilities may be employed to achieve desired objectives or a particular end state for a specific scenario.

According to the scenario, you have searched all open ports of the we-are-secure server. Now you want to perform the next information-gathering step, i.e., passive OS fingerprinting. For this, you will use the P0f tool to accomplish the task. P0f is a passive OS fingerprinting tool that is used to identify the operating system of a target host simply by examining captured packets even when the device is behind a packet firewall. It does not generate any additional direct or indirect network traffic. P0f can also be used to gather various information, such as firewall presence, NAT use (for policy enforcement), existence of a load balancer setup, the distance to the remote system and its uptime, etc. Answer: C is incorrect. Nmap is used for active OS fingerprinting. Nmap is a free open-source utility for network exploration and security auditing. It is used to discover computers and services on a computer network, thus creating a "map" of the network. Just like many simple port scanners, Nmap is capable of discovering passive services. In addition, Nmap may be able to determine various details about the remote computers. These include operating system, device type, uptime, software product used to run a service, exact version number of that product, presence of some firewall techniques and, on a local area network, even vendor of the remote network card. Nmap runs on Linux, Microsoft Windows etc.Answer: A is incorrect. SuperScan is a TCP/UDP port scanner. It also works as a ping sweeper and hostname resolver. It can ping a given range of IP addresses and resolve the host name of the remote system.The features of SuperScan are as follows: It scans any port range from a built-in list or any given range. It performs ping scans and port scans using any IP range. It modifies the port list and port descriptions using the built in editor. It connects to any discovered open port using user-specified "helper" applications. It has the transmission speed control utility.

Answer: B is incorrect. NBTscan is a scanner that scans IP networks for NetBIOS name information. It sends a NetBIOS status query to each address in a supplied range and lists received information in human readable form. It displays IP address, NetBIOS computer name, logged-in user name and MAC address of each responded host. NBTscan works in the same manner as nbtstat, but it operates on a range of addresses instead of just one.

The various types of internal tests performed on builds are as follows: Regression tests: It is also known as the verification testing. These tests are developed to confirm that capabilities in earlier builds continue to work correctly in the subsequent builds. Functional test: These tests emphasizes on verifying that the build meets its functional and data requirements and correctly generates each expected display and report. Performance tests: These tests are used to identify the performance thresholds of each build. Reliability tests: These tests are used to identify the reliability thresholds of each build.

NIST has developed a suite of documents for conducting Certification & Accreditation (C&A). These documents are as follows: 1.NIST Special Publication 800-37: This document is a guide for the security certification and accreditation of Federal Information Systems. 2.NIST Special Publication 800-53: This document provides a guideline for security controls for Federal Information Systems. 3.NIST Special Publication 800-53A. This document consists of techniques and procedures for verifying the effectiveness of security controls in Federal Information System. 4.NIST Special Publication 800-59: This document provides a guideline for identifying an information system as a National Security System. 5.NIST Special Publication 800-60: This document is a guide for mapping types of information and information systems to security objectives and risk levels.

Removing the IPP printing capability from a server is a good countermeasure against an IIS buffer overflow attack. A Network Administrator should take the following steps to prevent a Web server from IIS buffer overflow attacks: Conduct frequent scans for server vulnerabilities. Install the upgrades of Microsoft service packs.

Implement effective firewalls. Apply URLScan and IISLockdown utilities. Remove the IPP printing capability. Answer: D is incorrect. The following are the DNS zone transfer countermeasures: Do not allow DNS zone transfer using the DNS property sheet: a.Open DNS. b.Right-click a DNS zone and click Properties. c.On the Zone Transfer tab, clear the Allow zone transfers check box. Configure the master DNS server to allow zone transfers only from secondary DNS servers: a.Open DNS. b.Right-click a DNS zone and click Properties. c.On the zone transfer tab, select the Allow zone transfers check box, and then do one of the following: To allow zone transfers only to the DNS servers listed on the name servers tab, click on the Only to the servers listed on the Name Server tab. To allow zone transfers only to specific DNS servers, click Only to the following servers, and add the IP address of one or more servers. Deny all unauthorized inbound connections to TCP port 53. Implement DNS keys and encrypted DNS payloads. Answer: A is incorrect. The following are the countermeasures against SNMP enumeration: 1.Removing the SNMP agent or disabling the SNMP service 2.Changing the default PUBLIC community name when 'shutting off SNMP' is not an option 3.Implementing the Group Policy security option called Additional restrictions for anonymous connections 4.Restricting access to NULL session pipes and NULL session shares 5.Upgrading SNMP Version 1 with the latest version 6.Implementing Access control list filtering to allow only access to the read-write community from approved stations or subnets Answer: C is incorrect. NetBIOS NULL session vulnerabilities are hard to prevent, especially if NetBIOS is needed as part of the infrastructure. One or more of the following steps can be taken to limit NetBIOS NULL session vulnerabilities: 1.Null sessions require access to the TCP 139 or TCP 445 port, which can be disabled by a Network Administrator. 2.A Network Administrator can also disable SMB services entirely on individual hosts by unbinding WINS Client TCP/IP from the interface. 3.A Network Administrator can also restrict the anonymous user by editing the registry values: a.Open regedit32, and go to HKLM\SYSTEM\CurrentControlSet\LSA. b.Choose edit > add value. Value name: RestrictAnonymous Data Type: REG_WORD Value: 2

The following procedural patterns are defined by the DARPA paper in order to perform secure software development practices: Build the server from the ground up: It includes the following features: Build the server from the ground up. Identify the default installation of the operating system and applications. Support hardening procedures to remove unnecessary services. Identify a vulnerable service for ongoing risk management. Choose the right stuff: It defines guidelines to select right commercial off-the-shelf (COTS) components and decide whether to use and build custom components. Document the server configuration: It supports the creation of an initial configuration baseline and tracks all modifications made to servers and application configurations.

Patch proactively: It supports in applying patches as soon as they are available rather than waiting until the systems cooperate. Red team the design: It supports an independent security assessment from the perspective of an attacker in the quality assurance or testing stage. An independent security assessment is helpful in addressing a security issue before it occurs. Answer: A is incorrect. Hidden implementation pattern is not defined in the DARPA paper. This pattern is applicable to software assurance in general. Hidden implementation limits the ability of an attacker to distinguish the internal workings of an application. Answer: E is incorrect. Password propagation is not defined in the DARPA paper. This pattern is applicable to aspects of authentication in a Web application. Password propagation provides an alternative by requiring that a user's authentication credentials be verified by the database before providing access to that user's data.

Common types of intellectual property include copyrights, trademarks, patents, industrial design rights, and trade secrets. A copyright is a form of intellectual property, which secures to its holder the exclusive right to produce copies of his or her works of original expression, such as a literary work, movie, musical work or sound recording, painting, photograph, computer program, or industrial design, for a defined, yet extendable, period of time. It does not cover ideas or facts. Copyright laws protect intellectual property from misuse by other individuals. A trademark is a distinctive sign used by an individual, business organization, or other legal entity to identify that the products or services to consumers with which the trademark appears originate from a unique source, and to distinguish its products or services from those of other entities. A trademark is designated by the following symbols: : It is for an unregistered trade mark and it is used to promote or brand goods. : It is for an unregistered service mark and it is used to promote or brand services. : It is for a registered trademark. A patent is a set of exclusive rights granted by a state to an inventor or their assignee for a limited period of time in exchange for a public disclosure of an invention. Answer: C is incorrect. It is not a type of intellectual property.