Pass the iSQI CTFL2018 CTFL_Syll2018 Questions and answers with ExamsMirror

Maintenance testing is a type of testing that is performed after a software product has been delivered and deployed to ensure that it still meets its requirements and functions correctly after changes have been made to it or to its environment. Changes can include corrective changes (fixing defects), adaptive changes (adapting to new platforms or environments), perfective changes (improving performance or usability), or preventive changes (avoiding potential problems). One of the appropriate reasons for maintenance testing is to verify that the software product works as expected after upgrading the operating system, which is an example of an adaptive change. Other reasons for maintenance testing can include verifying that the software product works as expected after fixing defects, adding new features, improving performance, or preventing future issues. You can find more information about maintenance testing in Software Testing Foundations: A Study Guide for the Certified Tester Exam, Chapter 12.

Risk-based testing is an approach to testing that prioritizes and focuses on testing activities based on the level of risk associated with each feature or function of the system under test. Risk-based testing aims to optimize the use of time, resources, and techniques for testing by identifying and addressing the most critical and likely sources of failure or harm in the system under test. Some examples of typical risk-based testing activities are:

Brainstorming sessions are held with a wide variety of stakeholders to identify possible failures in the system: This activity is part of the risk identification process, which involves gathering information and opinions from different perspectives and sources to discover potential risks in the system under test.

Tests are prioritized to ensure that those associated with critical parts of the system are executed earlier: This activity is part of the risk analysis and evaluation process, which involves assessing the probability and impact of each risk and ranking them according to their severity and importance.

The focus of testing is shifted to an area in the system where tests find more defects than expected: This activity is part of the risk mitigation and monitoring process, which involves taking actions to reduce or eliminate the risks and tracking their status and progress.

The evaluation of a risk-management tool to decide which tool to use for future projects is not an example of a typical risk-based testing activity because it is not directly related to testing the system under test based on its risks. Rather, it is an example of a tool selection or evaluation activity, which involves comparing and choosing a tool that can support or enhance the testing process based on criteria such as functionality, usability, reliability, compatibility, cost, etc. You can find more information about risk-based testing in [A Study Guide to the ISTQB® Foundation Level 2018 Syllabus], Chapter 3, Section 3.4.

Test estimation is the process of predicting the effort, time, and resources required for testing a software system. Test estimation depends on several factors that influence the scope, complexity, and quality of testing. Some of these factors are:

Characteristics of the product: This factor indicates how difficult or challenging it is to test the software system based on its size, functionality, reliability, usability, performance, security, etc.

Characteristics of the development process: This factor indicates how well or poorly the software system is developed based on the development methodology, standards, tools, techniques, etc.

Characteristics of the test process: This factor indicates how effective or efficient the testing process is based on the test strategy, plan, design, execution, evaluation, etc.

Characteristics of the test team: This factor indicates how skilled or experienced the test team is based on their knowledge, competence, motivation, communication, collaboration, etc.

The outcome of testing of previous test cycle is not a factor on which test estimation is dependent upon because it does not affect the effort, time, or resources required for testing the current test cycle. Rather, it is an outcome or consequence of test estimation that can provide feedback and lessons learned for improving future test estimations. You can find more information about test estimation in Software Testing Foundations: A Study Guide for the Certified Tester Exam, Chapter 22.

A software company decided to buy a commercial application for its accounting operations. As part of the evaluation process, the company decided to assemble a team to test a number of candidate applications. The most suitable team for this goal would be a team with a mix of software testers and experts from the accounting department. This team would have the following advantages:

Software testers have the skills and experience to design, execute, and evaluate test cases based on the requirements and criteria of the company. They can also use tools and techniques to support their testing activities and provide reliable and objective information about the quality and risk level of each candidate application.

Experts from the accounting department have the knowledge and expertise to understand and validate the functionality and usability of each candidate application. They can also provide feedback and suggestions for improvement based on their needs and expectations as end users or customers.

The other teams mentioned in the question are not as suitable for this goal as they are for other purposes or scenarios. For example:

A team from an outsourcing company which specializes in testing accounting software: This team might have the skills and experience to test accounting software, but they might not have the knowledge and expertise to understand and validate the specific requirements and criteria of the company that wants to buy the application. They might also lack the communication and collaboration with the stakeholders of the company who are involved in the evaluation process.

A team of users from the accounting department that will need to use the application on a daily basis: This team might have the knowledge and expertise to understand and validate the functionality and usability of each candidate application, but they might not have the skills and experience to design, execute, and evaluate test cases based on the requirements and criteria of the company. They might also lack the tools and techniques to support their testing activities and provide reliable and objective information about the quality and risk level of each candidate application.

A team from the company’s testing team, due to their experience in testing software: This team might have the skills and experience to design, execute, and evaluate test cases based on the requirements and criteria of the company, but they might not have the knowledge and expertise to understand and validate the functionality and usability of each candidate application. They might also lack the feedback and suggestions for improvement based on the needs and expectations of the end users or customers.

Memory leaks are errors that occur when a program does not release memory that it has allocated, causing the system to run out of memory and slow down or crash. Memory leaks cannot be detected by structure-based testing techniques, which are based on the code structure and logic. Structure-based testing techniques can only find errors that are related to the control flow, data flow, or logic of the program. For example, they can find errors such as features that are only partially implemented, data structures that are used before initialization, or division by zero. To detect memory leaks, you need dynamic analysis tools that monitor the memory usage of the program during execution. You can find more information about structure-based testing techniques and dynamic analysis tools in A Study Guide to the ISTQB® Foundation Level 2018 Syllabus, Chapter 4, Sections 4.2 and 4.31.

Static analysis tools are tools that examine the code or design of a software system without executing it. Static analysis tools can be used to find defects, measure complexity, check compliance, or improve quality. Some examples of defect types that can be found by static analysis tools are:

Variables that are never used: This defect type occurs when a variable is declared but not referenced or assigned in the code, which indicates a waste of memory or a logic error.

Coding standard violations: This defect type occurs when the code does not follow the predefined rules or conventions for formatting, naming, commenting, etc., which affects the readability and maintainability of the code.

Uncalled functions and procedures: This defect type occurs when a function or procedure is defined but not called or invoked in the code, which indicates a waste of resources or a missing functionality.

Memory leaks are defect types that are least likely to be found by static analysis tools because they are related to the dynamic behavior and performance of the software system. Memory leaks occur when a program does not release memory that it has allocated, causing the system to run out of memory and slow down or crash. Memory leaks can only be detected by dynamic analysis tools that monitor the memory usage of the program during execution. You can find more information about static analysis tools in [A Study Guide to the ISTQB® Foundation Level 2018 Syllabus], Chapter 6, Section 6.3.

Beta testing is a type of acceptance testing that is normally performed by customers or potential customers at their own locations. Beta testing is done after the software product has passed the internal testing and quality assurance processes and is ready for release or deployment. Beta testing allows the customers or users to evaluate the software product in their real environment and provide feedback and suggestions for improvement. Beta testing can also help identify defects, compatibility issues, usability problems, or performance bottlenecks that might not have been detected during the internal testing. You can find more information about beta testing in [A Study Guide to the ISTQB® Foundation Level 2018 Syllabus], Chapter 2, Section 2.3.

A use case is a description of how a user interacts with a system to achieve a goal or perform a task. A use case typically consists of a sequence of steps or actions that the user and the system perform to complete the goal or task. A use case can be used as a basis for designing test cases that verify the functionality and usability of the system under test. A test sequence that represents a possible use case should follow the logical order and flow of the user-system interaction and cover the main scenario and possible variations or exceptions. For example, based on the test cases given for a Library Management System, we can identify the following use cases:

UC1: Add a new borrower to the system

UC2: Update a borrower’s data

UC3: Remove a borrower from the system

UC4: Loan a book to a borrower

UC5: Return a book from a borrower

UC6: Reserve a book for a borrower

UC7: Send “reservation ready” message to a borrower

The test sequence that represents a possible use case is D. 1-2-6-7-4-5-3. This test sequence follows the logical order and flow of the user-system interaction and covers the main scenario and possible variations or exceptions. For example:

TC1: Add a new borrower to the system -> This is the first step of the use case, where the user registers as a new borrower in the system.

TC2: Update a borrower’s data -> This is a possible variation of the use case, where the user updates their personal or contact information in the system.

TC6: Reserve a book for a borrower -> This is the second step of the use case, where the user reserves a book that they want to borrow from the library.

TC7: Send “reservation ready” message to a borrower -> This is the third step of the use case, where the system sends a message to the user informing them that their reserved book is ready for pickup.

TC4: Loan a book to a borrower -> This is the fourth step of the use case, where the user picks up their reserved book from the library and loans it from the system.

TC5: Return a book from a borrower -> This is the fifth step of the use case, where the user returns their borrowed book to the library and returns it to the system.

TC3: Remove a borrower from the system -> This is a possible exception of the use case, where

the user decides to cancel their membership and remove their account from the system.

The other test sequences do not represent possible use cases because they do not follow the logical order and flow of the user-system interaction or they do not cover the main scenario and possible variations or exceptions. For example:

A. 1-4-2-7-5-6-3 -> This test sequence does not follow the logical order and flow of the user-system interaction because it performs some steps before or after they are supposed to happen. For example, it performs TC4 (Loan a book to a borrower) before TC6 (Reserve a book for a borrower), which does not make sense because the user cannot loan a book that they have not reserved yet.

B. 1-6-2-5-7-4-3 -> This test sequence does not follow the logical order and flow of the user-system interaction because it performs some steps before or after they are supposed to happen. For example, it performs TC5 (Return a book from a borrower) before TC4 (Loan a book to a borrower), which does not make sense because the user cannot return a book that they have not loaned yet.

C. 1-6-4-7-5-3-2 -> This test sequence does not cover the main scenario and possible variations or exceptions because it omits some steps that are essential for completing or terminating the use case. For example, it omits TC2 (Update a borrower’s data), which is a possible variation of the use case that allows the user to change their personal or contact information in the system.

You can find more information about use cases and test sequences in [A Study Guide to the ISTQB® Foundation Level 2018 Syllabus], Chapter 4, Section 4.2.

How to fix the defect is not needed to specify in a defect report because it is not part of the information that is required to describe, reproduce, and prioritize the defect. How to fix the defect is part of the solution or resolution that is provided by the developers or maintainers who are responsible for correcting the defect. A defect report is a document that records and communicates the details of a defect found during testing. A defect report typically includes the following information:

Defect ID: A unique identifier for the defect

Summary: A brief description of the defect

Severity and priority: An indication of how serious and urgent the defect is

Test environment details: A description of the hardware, software, network, data, tools, etc., that were used when the defect was found

How to reproduce the defect: A step-by-step procedure to recreate the defect

Expected and actual results: A comparison of what should have happened and what actually happened when the defect occurred

Attachments: Any additional information or evidence that can help understand or resolve the defect, such as screenshots, logs, files, etc.

You can find more information about defect reports in [A Study Guide to the ISTQB® Foundation Level 2018 Syllabus], Chapter 5.