Pass the Juniper JNCIS-SP JN0-363 Questions and answers with ExamsMirror

IS-IS is a link-state routing protocol that uses a Shortest Path First (SPF) algorithm to create a topology map of the network. It floods link-state advertisements (LSAs) to all nodes within the network area to ensure each node has a consistent view of the network topology.

References

Juniper Networks Technical Documentation on IS-IS

Understanding IS-IS - Juniper Networks

The no-readvertise policy statement is used to prevent a static route from being redistributed into a dynamic routing protocol. This setting ensures that routes that are configured statically are not advertised out via dynamic routing protocols such as OSPF or BGP.

References

Juniper Networks Technical Documentation on Routing Policy

Considering the bandwidth reservations shown, the only path from R4 to R6 that has sufficient available bandwidth for a new LSP with 400 Mbps reservation is via R1, R2, and R5. This is because the R4-R5 direct link and the R4-R1-R2-R3-R6 path do not have enough unreserved bandwidth to accommodate an additional 400 Mbps LSP.

In the OSPF routing table output, prefixes are marked with different route types. An external prefix injected into OSPF is marked as 'Ext' (External) followed by a number that indicates whether it's an E1 or E2 route. The prefix 172.18.1.0/24 is marked as Ext2, which indicates that it is an external route that has been redistributed into OSPF from another routing protocol or static configuration.

References

Juniper Networks Technical Documentation on OSPF