Pass the LPIC Level 1 101-500 Questions and answers with ExamsMirror

The command that prints a list of usernames (first column) and their primary group (fourth column) from the /etc/passwd file is cut -d : -f 1,4 /etc/passwd. The cut command is used to extract selected fields or characters from each line of a file or standard input. The -d or --delimiter option specifies the character that separates the fields, which in this case is a colon (:). The -f or --fields option specifies the fields to be printed, which in this case are the first and the fourth fields. The /etc/passwd file is a text file that contains information about the user accounts on the system, such as the username, password, user ID, group ID, home directory, and login shell. The first column of the file is the username and the fourth column is the group ID, which corresponds to the primary group of the user. The cut command will print these two columns separated by a colon for each line of the file. For example, running cut -d : -f 1,4 /etc/passwd will produce an output like this:

root:0 daemon:1 bin:1 sys:3 sync:4 games:5 man:12 lp:7 mail:8 news:9 uucp:10 proxy:13 www-data:33 backup:34 list:38 irc:39 gnats:41 nobody:65534 systemd-network:100 systemd-resolve:101 syslog:102 messagebus:103 _apt:104 lxd:105 uuidd:106 dnsmasq:107 sshd:108 pollinate:109 vboxadd:999 ubuntu:1000

The other commands are either invalid or do not perform the desired task. The fmt command is used to reformat paragraphs of text, but it does not have a -f option. The sort command is used to sort lines of text, but it does not have a -t option. The paste command is used to merge lines of files, but it does not have a -f option. The split command is used to split a file into pieces, but it does not have a -c option. References:

Linux Essentials - Linux Professional Institute Certification Programs

Exam 101 Objectives - Linux Professional Institute

cut(1) - Linux manual page

/etc/passwd file - Linux.com

The content of the kernel ring buffer is reset when the ring buffer is explicitly reset using the command dmesg --clear or when the system is shut down or rebooted. The kernel ring buffer is a portion of the physical memory that holds the kernel’s log messages. It has a fixed size, which means once the buffer is full, the older logs records are overwritten. The dmesg command-line utility is used to print and control the kernel ring buffer in Linux and other Unix-like operating systems1. The dmesg --clear option clears the ring buffer’s contents, which can be useful for debugging purposes or to free up some memory2. The systemshutdown or reboot also clears the ring buffer’s contents, as the physical memory is reset and the kernel is reloaded3.

The other options are false or irrelevant. The ring buffer is not reset when it is read using dmesg without any additional parameters, as this option only displays the current contents of the buffer without modifying them2. The ring buffer is not reset when a configurable amount of time, 15 minutes by default, has passed, as there is no such time limit for the buffer’s persistence4. The ring buffer is not reset when the kernel loads a previously unloaded kernel module, as this action only affects the kernel’s functionality and not its log messages5. References:

Dmesg Command in Linux | Linuxize1

dmesg(1) - Linux manual page2

Linux Dmesg Command Help and Examples - Computer Hope3

Lockless Ring Buffer Design — The Linux Kernel documentation4

Linux Kernel Module Management 101 - Linux.com5

 The EFI System Partition (ESP) is a special partition on a disk that contains the UEFI boot loaders, applications and drivers for the installed operating systems. The UEFI firmware will load these files from the ESP when the system boots. The ESP is mandatory for UEFI boot and it is usually formatted with a FAT file system. The ESP is part of the 101.1 Determine and configure hardware settings topic of the LPI Linux Essentials certification program12.

The other options are false or irrelevant. The Linux root file system is not contained on the ESP, it is usually on a separate partition with a Linux file system, such as ext4 or btrfs. The default swap space file is not contained on the ESP, it is usually on a swap partition or a swap file on the Linux root file system. The Linux default shell binaries are not contained on the ESP, they are usually on the /bin directory of the Linux root file system. The user home directories are not contained on the ESP, they are usually on the /home directory of the Linux root file system or on a separate partition. References:

Linux Essentials - Linux Professional Institute Certification Programs1

Exam 101 Objectives - Linux Professional Institute2

EFI system partition - ArchWiki3

/boot/efi Linux partition: What is, usage recommendations

The correct answer is C, 2dd. This command will delete two lines, the current and the following line, in vi editor. The syntax of the command is:

[number]dd

The number specifies how many lines to delete, starting from the current line. The dd command deletes the lines and puts them in a buffer, which can be pasted later with the p command. If no number is given, the command will delete only the current line.

The other commands are incorrect for the following reasons:

A, d2: This command will delete two characters, not two lines. The syntax of the command is:

d[motion]

The motion specifies how many characters to delete, starting from the current cursor position. The 2 motion means two characters to the right. The d command deletes the characters and puts them in a buffer, which can be pasted later with the p command.

B, 2d: This command is incomplete and will not work. The d command requires a motion argument to specify how many characters to delete. The 2 argument is only a number, not a motion. The command will wait for another keystroke to complete the motion.

D, dd2: This command will delete the current line and then move the cursor two lines down. The syntax of the command is:

dd[number]

The dd command deletes the current line and puts it in a buffer, which can be pasted later with the p command. The number specifies how many lines to move the cursor down, after deleting the current line. If no number is given, the command will move the cursor to the next line.

E, de12: This command will delete from the current cursor position to the end of the word, and then move the cursor to the 12th line. The syntax of the command is:

d[motion][number]

The d command deletes the characters specified by the motion and puts them in a buffer, which can be pasted later with the p command. The e motion means the end of the word. The number specifies the line number to move the cursor to, after deleting the characters.

References:

vi/vim delete commands and examples | alvinalexander.com

How to Delete Lines in Vim / Vi | Linuxize

How can I delete multiple lines in vi? - Stack Overflow

 The daemon that handles power management events on a Linux system is acpid. A daemon is a background process that runs continuously and performs certain tasks without user intervention. The acpid daemon listens for power management related events, such as switching between AC and battery power on a laptop, pressing the power button, closing the lid, etc., and executes various commands in response. The acpid daemon can be configured by editing the files in /etc/acpi/events and /etc/acpi/actions directories, or by using a graphical tool like gnome-power-manager or xfce4-power-manager. The acpid daemon is part of the 101.1 Determine and configure hardware settings topic of the LPI Linux Essentials certification program12. References:

Linux Essentials - Linux Professional Institute Certification Programs1

Exam 101 Objectives - Linux Professional Institute2

Power management - ArchWiki2

9.12. Power Management: Advanced Configuration and Power Interface (ACPI)

The bg command is used to move and resume in the background the last stopped shell job. A stopped job is a process that has been suspended by using Ctrl+Z or the kill -STOP command. The bg command will resume the execution of the stopped job and allow it to run in the background, without blocking the current shell. The bg command can also take a job number as an argument, which can be obtained by using the jobs command. For example, if the last stopped job is 1+ Stopped sleep 500, then the following command will move and resume it in the background:

bg %1

The output will be:

1+ sleep 500 &

The fg command is used to move and resume in the foreground the last stopped or backgrounded job. The run and back commands are not valid commands in Linux. References:

[LPI Exam 101 Detailed Objectives], Topic 103: GNU and Unix Commands, Objective 103.5: Create, monitor and kill processes, Weight: 4, Key Knowledge Areas: Use of jobs, fg and bg commands.

Linux Commands: jobs, bg, and fg, Topic: The bg Command.

The vi command is a text editor that operates in two modes: command mode and insert mode. Command mode is used to enter commands to manipulate the text, such as saving, quitting, copying, pasting, etc. Insert mode is used to enter text into the file. When the vi command is invoked without any additional parameters, it starts in command mode and opens a new empty file. To enter text, the user has to press i to switch to insert mode. To return to command mode, the user has to press Esc. To save and quit, the user has to enter :wq in command mode. The other options are either incorrect or not applicable. The vi command does not load the last file used or the content of the vi buffer by default. It also does not require the user to explicitly create or load a file. It does not exit with an error message unless there is a problem with the terminal or the system. References:

LPIC-1 Exam 101 Objectives, Topic 103: GNU and Unix Commands, 103.7 Use and edit text files

LPIC-1 Linux Administrator 101-500 Exam FAQ, LPIC-1 Exam 101 Objectives, GNU and Unix Commands (Total Weight: 25)

The split command in Linux is used to split large files into smaller files. The default action of the split command on an input file is to break the file into new files of 1,000 line pieces each. The names of the new files are PREFIXaa, PREFIXab, PREFIXac, and so on. By default, the PREFIX of the new files is x, but it can be changed with the -a option. For example, the following command will split the file someLogFile.log into new files of 1,000 lines each with the prefix log:

split someLogFile.log -a 3 log

The new files will be named logaaa, logaab, logaac, and so on. To verify the number of lines in each new file, we can use the wc command with the -l option. For example, the following command will show the number of lines in the first and the last new file:

wc -l logaaa logaas

The output will be:

1000 logaaa 170 logaas

This means that the original file had 17,170 lines and was split into 18 new files. 17 of them have 1,000 lines each, and the last one has the remaining 170 lines. References:

[LPI Exam 101 Detailed Objectives], Topic 103: GNU and Unix Commands, Objective 103.7: Perform basic file management, Weight: 4, Key Knowledge Areas: Use of split and cat to split or join files.

[Split Command in Linux: 9 Useful Examples], Topic: Split Files

 The command kill -TERM 123 kills the process with the PID 123 but allows the process to “clean up” before exiting. The option -TERM specifies the signal to be sent to the process, which is the termination signal (SIGTERM). This signal requests the process to terminate gracefully, which means that the process can perform any necessary actions before exiting, such as closing files, releasing resources, or saving data. The process can also catch the signal and ignore it or handle it in a different way, if it is programmed to do so. The syntax is: kill -TERM pid. For example, kill -TERM 123 will send the SIGTERM signal to the process with the PID 123, asking it to terminate nicely. The other options are not correct because:

A. kill -PIPE 123: This command sends the broken pipe signal (SIGPIPE) to the process, which is not used to kill the process, but to notify it that the other end of a pipe has been closed. This signal is usually ignored by the process, unless it is writing to the pipe, in which case it will cause the process to terminate1.

B. kill -KILL 123: This command sends the kill signal (SIGKILL) to the process, which is the most powerful way to kill the process, but it does not allow the process to “clean up” before exiting. The SIGKILL signal cannot be caught, blocked, or ignored by the process, and it forces the process to terminate immediately, without performing any actions. This command should be used as a last resort, when the process is unresponsive or causing harm to the system2.

C. kill -STOP 123: This command sends the stop signal (SIGSTOP) to the process, which is not used to kill the process, but to pause it. The SIGSTOP signal cannot be caught, blocked, or ignored by the process, and it suspends the execution of the process until it receives a continue signal (SIGCONT). This command can be used to temporarily stop a process from running, without terminating it3. References:

What is the purpose of the SIGPIPE signal? - Stack Overflow

How to kill a process in Linux - LinuxConfig.org

Linux Signals - GeeksforGeeks

The PATH variable defines the directories in which a Bash shell searches for executable commands. The PATH variable is a colon-separated list of directories that the shell scans when a command is entered. For example, if the PATH variable is set to /usr/local/bin:/usr/bin:/bin, then the shell will look for the command in these three directories, in order. If the command is not found in any of these directories, the shell will report an error message. The other options are either invalid or do not perform the desired task. The BASHEXEC, EXECPATH and PATHRC variables are not valid Bash variables. The BASHRC variable is used to specify a file that is executed whenever a new interactive shell is started, but it does not affect the command search path. References:

LPIC-1 Exam 101 Objectives, Topic 103: GNU and Unix Commands, 103.1 Work on the command line

LPIC-1 Linux Administrator 101-500 Exam FAQ, LPIC-1 Exam 101 Objectives, GNU and Unix Commands (Total Weight: 25)