Pass the Microsoft 365 Certified: Teams Administrator Associate MS-700 Questions and answers with ExamsMirror

To deploy the Microsoft Viva Connections app to Teams and install the app as the first item on the app bar of the Teams client for all users, you need to use the Teams admin center and PowerShell. Here are the steps to follow:

Sign in to the Teams admin center with your Microsoft 365 username and password1.

In the left navigation, go to Teams apps > Manage apps.

Click Upload and then select the Viva Connections app package that you created using PowerShell2. If you have not created the app package yet, you can follow the instructions in this article to do so.

After uploading the app package, click on the app name and then click Publish.

In the left navigation, go to Teams apps > Setup policies.

Select an existing policy or create a new one by clicking Add.

In the Setup policy pane, under Installed apps, click Add apps and then select the Viva Connections app from the list.

Drag and drop the Viva Connections app to reorder it as the first item on the app bar.

Click Save and then Close.

To assign the setup policy to all users, you can use PowerShell to run the following cmdlet:

Get-CsOnlineUser | Grant-CsTeamsAppSetupPolicy -PolicyName "YourPolicyName"

Replace “YourPolicyName” with the name of the policy that you created or modified in step 6.

Note: It may take up to 24 hours for the changes to take effect.

Now, you have deployed and installed the Microsoft Viva Connections app to Teams as the first item on the app bar for all users.

To ensure that users can perform the following actions:

Record Teams calls and Teams meeting.

Transcribe Teams calls and Teams meeting.

You need to do the following:

Turn on the recording and transcription settings in the Teams admin center. This will allow users to start and stop recording and transcription during a meeting or call. The recording and transcription will be stored in OneDrive or SharePoint and available in the meeting chat or channel conversation. For more details, see Record a meeting in Microsoft Teams.

Turn on the transcription and captions settings in the Teams admin center. This will enable automatic transcription and captions for meeting recordings. Users can play back the recordings with closed captions and review the transcript in the Recording & Transcripts tab in Teams. For more details, see Configure transcription and captions for Teams meetings.

Turn on the live transcription settings in the Teams admin center. This will allow users to view live transcription during a meeting or call. Users can also download the transcript after the meeting or call. For more details, see View live transcription in Microsoft Teams meetings.

To configure the Teams meeting invites of Allan DeYoung to show a dial-in bridge number in Toronto and then a dial-in bridge number in Paris, you can use the Teams admin center to set the phone numbers included on his invites. Here are the steps to follow:

Sign in to the Teams admin center with your Microsoft 365 username and password1.

In the left navigation, go to Users and then select Allan DeYoung from the list of users.

In the user details page, go to Meetings and then click Edit next to Audio Conferencing.

In the Audio Conferencing pane, under Phone numbers, select Customized from the drop-down menu.

In the Customized phone numbers box, enter the phone numbers that you want to include on Allan’s invites, separated by commas. For example, you can enter:

+1 416-555-1234 (Toronto), +33 1 55 55 55 55 (Paris)

Click Save and then Close.

Now, when Allan DeYoung schedules a Teams meeting, his invites will show the Toronto and Paris dial-in bridge numbers in the body of his invites, in the order that you specified.

To ensure that when users join a meeting by using a phone, they are prompted to record their name, you need to enable the meeting entry and exit notifications in the Teams admin center. Here are the steps to follow:

Sign in to the Teams admin center with your admin credentials.

Go to Meetings > Conference Bridges.

At the top of the Conference Bridges page, select Bridge settings.

Enable the Meeting entry and exit notifications toggle.

Choose Names for the Entry/exit announcement type.

Turn on the toggle for Ask callers to record their name before joining a meeting.

Click Save to apply the settings.

To ensure that only users that are assigned the Global Administrator, User Administrator, or Guest Inviter roles can invite guest users to your company’s tenant, you need to configure the external collaboration settings in the Microsoft Entra admin center. Here are the steps to follow:

Sign in to the Microsoft Entra admin center with your admin credentials.

Expand External identities, and then select External collaboration settings.

Under Guest invite settings, choose Only users assigned to specific admin roles can invite guests.

Select Save to apply the settings.

To restrict external Teams communication for both calling and personal chat to only organizational users that use the microsoft.com domain, you need to use the Teams admin center to configure the external access settings. Here are the steps to follow:

Sign in to the Teams admin center with your Microsoft 365 username and password.

In the left navigation, go to Org-wide settings > External access.

Under External access, turn on the toggle for Users can communicate with other Skype for Business and Teams users.

Under Cross-tenant access settings, click Manage settings.

In the Cross-tenant access settings pane, under Calling and chat, select Allow specific domains and then enter microsoft.com in the box below. This will allow your users to communicate with Microsoft users via calling and chat.

Click Save.

Note: You also need to make sure that microsoft.com has configured their external access settings to allow communication with your domain. See Communicate with users from other organizations for more details.

To ensure that when users dial emergency numbers, the call is routed based on the user’s current location, you need to enable the external location lookup mode in Teams. This mode allows Teams to use the location services of the device’s operating system to suggest an emergency address for the user. The user can then confirm, edit, or enter a new address, which will be used to route the emergency call to the appropriate Public Safety Answering Point (PSAP). Here are the steps to follow:

Sign in to the Teams admin center with your admin credentials.

Go to Voice > Emergency policies.

Select Add.

Enter a name for the emergency calling policy, for example, “E911WFH”.

Turn on External location lookup mode.

Select Apply to create the policy.

To assign the policy to the users who need it, go to Users on the left menu and select the users that you want to apply the policy to. You can use the filters or the search box to find them.

On the right pane, under Policies, select Edit next to Emergency calling policy.

Choose the policy that you created from the drop-down list and click Apply.

To enable shared channel collaboration with microsoft.com, you need to use the Teams admin center to configure the channel policy and the cross-tenant access settings. Here are the steps to follow:

Sign in to the Teams admin center with your Microsoft 365 username and password1.

In the left navigation, go to Teams > Teams update policies.

Select an existing policy or create a new one by clicking Add.

In the Update policy pane, under Shared channels, turn on the toggles for Allow shared channel creation and Allow external shared channel participation. This will allow users to create shared channels and participate in shared channels created by microsoft.com.

Click Save and then Close.

In the left navigation, go to Org-wide settings > External access.

Under Cross-tenant access settings, click Manage settings.

In the Cross-tenant access settings pane, under Shared channels, select Allow specific domains and then enter microsoft.com in the box below. This will allow users to invite Microsoft contacts to shared channels created by your company.

Click Save.

Note: You also need to make sure that microsoft.com has configured their cross-tenant access settings to allow shared channel collaboration with your domain. See Collaborate with external participants in a channel2 for more details.

To acquire a dedicated Microsoft dial-in bridge number from either 431 or 343 area codes in Canada, you need to use the Teams admin center to request and assign a service number. A service number is a type of phone number that can handle hundreds of simultaneous calls and is used for services such as audio conferencing, auto attendants, and call queues. Here are the steps to follow:

Sign in to the Teams admin center with your Microsoft 365 username and password1.

In the left navigation, go to Voice > Phone numbers.

Click Add (+) and then select New service numbers.

In the New service numbers pane, select the country or region as Canada, the number type as Toll or Toll-free, and the location as Manitoba (for 431 area code) or Ontario (for 343 area code).

Enter the quantity of numbers that you need and then click Next.

Review your order details and then click Submit request.

Wait for an email confirmation that your request has been processed. This may take up to 24 hours.

After you receive the confirmation email, go back to the Teams admin center and click Refresh on the Phone numbers page. You should see the new service numbers that you requested.

To assign a service number to your audio conferencing bridge, go to Meetings > Conference bridges and then click Edit next to Default toll or toll-free number.

In the Edit default toll or toll-free number pane, select one of the new service numbers that you acquired from the drop-down menu and then click Apply.

Now, you have acquired and assigned a dedicated Microsoft dial-in bridge number from either 431 or 343 area codes in Canada.

To restrict Teams bandwidth by network range, you can use the Network Roaming Policy feature1. This feature allows you to define different media bit rate settings for different network locations based on the IP address ranges. Here are the steps to accomplish your task:

Create a new network roaming policy with the desired media bit rate settings. For example, you can use the following PowerShell cmdlet to create a policy named “MiamiPolicy” with a maximum bit rate of 1000 Kbps for audio and video:

New-CsTeamsNetworkRoamingPolicy -Identity "MiamiPolicy" -MaxMediaBitRateKb 1000

Assign the network roaming policy to the network range of the Miami office. You can use the following PowerShell cmdlet to assign the policy to the 10.10.10.0/24 network range:

New-CsTeamsNetworkRoamingPolicyAssignment -PolicyName "MiamiPolicy" -IPAddressRange "10.10.10.0/24"

Verify that the policy is applied correctly by using the Get-CsTeamsNetworkRoamingPolicyAssignment cmdlet. You should see something like this:

Identity : 10.10.10.0/24

PolicyName : MiamiPolicy

IPAddressRange : 10.10.10.0/24

EffectiveTime : 8/1/2023 1:18:24 PM

LastUpdateTime : 8/1/2023 1:18:24 PM

LastUpdateBy : admin@XXXXXXXXXXX.onmicrosoft.com

LastUpdateBySid : S-1-5-21-XXXXXXXXXX-XXXXXXXXXX-XXXXXXXXXX-XXXXX

Note: You may need to wait for some time for the policy to take effect.