Pass the NFPA Fire Protection Specialist CFPS Questions and answers with ExamsMirror

The correct answer is D. The greatest number of civilian home fire deaths can be attributed to the common room, living room, or family room area of origin in the home. According to a report by the NFPA, based on data from the National Fire Incident Reporting System (NFIRS) and NFPA’s fire experience survey, 31 percent of the civilian home fire deaths in 2017-2021 occurred in fires that started in the common room, living room, or family room. This was followed by 29 percent of the deaths in fires that started in the bedroom or sleeping area, and 12 percent of the deaths in fires that started in the kitchen or cooking area. The common room, living room, or family room area of origin is also the leading area of origin for home fires and civilian home fire injuries, accounting for 24 percent and 21 percent of those incidents, respectively. Some of the common causes of fires in the common room, living room, or family room include smoking materials, heating equipment, electrical equipment, candles, and fireplaces. To prevent fires and fire deaths in the common room, living room, or family room, the NFPA recommends the following safety tips:

Keep smoking materials away from anything that can burn. Use deep, sturdy ashtrays and wet cigarette butts before discarding them.

Keep space heaters at least 3 feet away from anything that can burn. Turn them off when you leave the room or go to sleep.

Have a qualified electrician inspect and repair any faulty wiring or outlets. Avoid overloading circuits or extension cords. Unplug appliances when not in use.

Keep candles in sturdy holders and away from children, pets, and anything that can burn. Blow them out when you leave the room or go to sleep.

Have your chimney and fireplace cleaned and inspected annually by a professional. Use a metal or glass screen to keep sparks from flying out. Dispose ofashes in a metal container with a lid, and keep it outside at least 10 feet away from your home.

Install smoke alarms on every level of your home, inside each bedroom, and outside each sleeping area. Test them monthly and replace the batteries at least once a year. Consider installing a home fire sprinkler system for added protection.

A Class I standpipe system provides 2 1/2 in. (65 mm) hose connections at designated locations in a building for use by the fire department. A Class I standpipe system is intended to supply water for fire fighting operations by trained personnel using hoses of 1 1/2 in. (40 mm), 1 3/4 in. (45 mm), or 2 in. (50 mm) nominal diameters. A Class I standpipe system is required to deliver a minimum flow rate of 250 gpm (946 L/min) at a minimum residual pressure of 100 psi (6.9 bar) at the most remote hose connection.References:

NFPA 14: Standard for the Installation of Standpipe and Hose Systems, 2019 Edition, Section 3.3.4.11

Fire Protection Handbook, 20th Edition, Volume 1, Chapter 8, Section 8.2.1.12

The ratio of the weight of a solid or a liquid substance to the weight of an equal volume of water is referred to asspecific gravity. Specific gravity is a dimensionless quantity that is defined as the ratio of the density of a substance to the density of the water at a specified temperature.The density of water at 4 0C is commonly used as a reference point1. Specific gravity can be calculated using the following formula:

SG=fracrhosubstance​rhoH2​O​

where rhosubstance​ is the density of the substance and rhoH2​O​ is the density of water. Specific gravity can be used to compare the relative densities of different substances and to determinewhether a substance will sink or float in water.A substance with a specific gravity less than 1 will float in water, while a substance with a specific gravity greater than 1 will sink in water2.

For example, the specific gravity of gold is 19.3, which means that gold is 19.3 times denser than water. Therefore, gold will sink in water. The specific gravity of ice is 0.92, which means that ice is 0.92 times denser than water. Therefore, ice will float in water.

References:

Specific gravity | Formula, Units, & Equation | Britannica

Specific Gravity - Definition, Calculation, Solved Examples, FAQs - BYJU’S

Probabilistic fire models are categorized into network, statistical, simulation, and behavioral models. Network models use graph theory to represent the fire spread and the fire protection system in a building. Statistical models use historical data and probability distributions to estimate the likelihood and consequences of fire scenarios. Simulation models use mathematical equations and numerical methods to describe the physical and chemical processes of fire and its effects on the environment and the occupants. Behavioral models use psychological and sociological theories to predict the human response and evacuation behavior in case of fire. Network models are not a common category of probabilistic fire models, and they are not mentioned in the sources provided by the user. Therefore, network models are the correct answer.

References:Probabilistic Fire Simulation Assessment Using Simplified Model and Zone Modelling of a Kitchen Fire Scenario;Computer Fire Models for Fire Investigation and Reconstruction;Fire Behavior

Professional negligence is a type of tort, not a type of contract. To prove professional negligence, the plaintiff must show that the defendant owed a duty of care to the plaintiff, that the defendant breached that duty by failing to meet the standard of care, that the defendant’s breach caused the plaintiff’s injury, and that the plaintiff suffered damages or harm as a result12 Breach of contract is a different cause of action that arises when one party fails to perform their obligations under a valid agreement with another party34 Breach of contract may or may not involve negligence, depending on the terms and circumstances of the contract4 Therefore, breach of contract is not a necessary element to prove professional negligence under standard of care.

References:

Standard Of Care: Legal Definition & Examples – Forbes Advisor3

Focusing on the Fundamentals - National Society of Professional Engineers1

Breach of Contract - Definition, Examples, Cases, Processes4

Professional Negligence: The Standard of Care Expert Evidence on a Summary Judgment Motion

Fire pump

Explore

Typical fire pump drivers reach maximum brake horsepower (BHP) between 140% and 170% of rated capacity, depending on the type and size of the pump. This means that the driver must be able to provide enough power to operate the pump at its peak efficiency point, which is usually beyond the rated capacity. The rated capacity is the flow rate at which the pump is designed to deliver a certain pressure, as specified by NFPA 20, Standard for the Installation of Stationary Pumps for Fire Protection. The maximum BHP is the highest power output required by the pump at any point on its performance curve. The driver must be sized to match the maximum BHP of the pump, with some allowance for service factor and safety margin.References:Understanding the Basics of Fire Pumps | Pumps & Systems;How are Engines and Motors Sized for Fire Pumps?; NFPA 20, Standard for the Installation of Stationary Pumps for Fire Protection, 2023 Edition, Chapter 4, Section 4.7.

20 years.

According to NFPA 25, Standard for the Inspection, Testing, and Maintenance of Water-Based Fire Protection Systems, 2020 edition, fast response sprinklers are those that have a response time index (RTI) of 50 (m·s)^(1/2) or less.These sprinklers are designed toactivate faster than standard response sprinklers in the event of a fire, and they are typically used in light hazard, ordinary hazard, and residential occupancies1

NFPA 25 requires initial testing of representative samples of fast response sprinklers after 20 years from the date of manufacture, and subsequent testing every 10 years thereafter. The testing involves removing a minimum of four sprinklers or 1% of the total number of sprinklers per individual sprinkler sample, whichever is greater, and sending them to a recognized testing laboratory. The laboratory will perform a plunge test, which measures the time it takes for the sprinkler to operate when exposed to a specified air temperature.The test results will indicate whether the sprinklers meet the acceptance criteria or need to be replaced123

References:

NFPA 25: Standard for the Inspection, Testing, and Maintenance of Water-Based Fire Protection Systems1

Sprinkler System Inspections, Testing, and Maintenance Frequencies Explained | NFPA4

Sprinkler Testing on Quick Response Sprinklers: What You Need to Know2

NFPA 25 ITM Quick Reference Guide - hillgrp.com3

The background color used from the source to the outlets of a nitrous oxide medical gas system is blue. This is the standard color coding for nitrous oxide cylinders and pipelines in medical gas pipeline systems12. The color coding helps to identify the gas type and prevent accidental misconnections or cross-contamination3. The color coding also indicates the pressure and flow characteristics of the gas system4. References:

Colour coding of copper pipes in Medical gas pipeline system according …

Doc 177 20 Medical Gas Cylinders Colour Coding - EIGA

Medical Gas Coding Color Chart & Explanation - Bay Corporation

Medical gases Health Technical Memorandum 02-01: Medical gas pipeline …

Acetylene

Explore

The ignition temperature of acetylene gas is 581° F (305° C). This is the minimum temperature required to ignite a gas or vapor in air without a spark or flame being present. The ignition temperature of acetylene gas varies according to composition, initial pressure, initial temperature, and water vapor content.As a typical example, an air mixture containing 30 percent acetylene by volume at atmospheric pressure can be ignited at about 581 °F (305°C)1.

References:Fuels and Chemicals - Autoignition Temperatures - The Engineering ToolBox;Ignition Temperatures and Group Classifications for Flammable Gases and Vapors;Is Acetylene Flammable? - Firefighter Insider;Ignition temperature acetylene - Big Chemical Encyclopedia;Acetylene Gas- its Characteristics and Safety Requirements

Fire pump

Explore

The correct answer is B.Safety is one of the criteria for selecting the power source for driving fire pumps, according to NFPA 20, Chapter 9.1.1.11. Reliability, adequacy, and economy are the other criteria mentioned in the same chapter. Efficiency, adaptability, and ecology are not explicitly stated as criteria in NFPA 20, although they may be considered as secondary factors in some cases.

1:Pump Installation: Everything About Electric and Diesel Driven Fire …