Pass the Nokia Network Routing Specialist II (NRS II) 4A0-113 Questions and answers with ExamsMirror

Comprehensive and Detailed Explanation From Exact Extract:

From Nokia 7750 SR OS Routing Protocols Guide (Router ID Selection Rules):

The order of RID selection:

Manually configured RID via “config router ospf router-id” (D — Correct)

System IP address (E — Correct)

Highest interface IP address (F — Correct)

RID is not derived from MAC addresses.

Thus, correct answers: D, E, F.

Comprehensive and Detailed Explanation From Exact Extract:

From Nokia 7750 SR OS Routing Protocols Guide (OSPF LSA Types Summary):

A: Type 1 — Router LSA → Stays within the originating area.

B: Type 2 — Network LSA → Stays within the originating area.

C: Type 3 — Summary Network LSA → Flooded between areas by ABRs.

D: Type 3 — Summary Router LSA → Same as above.

Thus, correct answers: A, B.

—

Let’s analyze each statement one-by-one:

A — Correct statement (NOT an incorrect one):

Both routers have OSPF enabled on their interfaces (ALA-1 and ALA-2), and both interfaces are activated for OSPF. So, Hello packets will be generated by both.

B — Incorrect statement (Correct choice for answer):

On ALA-1 (first router), the system interface was not added to OSPF area 0.0.0.0. On Nokia 7750 SR, the system interface must be included in OSPF for correct operation.

Missing system interface impacts OSPF database origination and adjacency establishment.

Thus, this is an incorrect configuration.

C — Incorrect statement (Correct choice for answer):

The interface types are mismatched:

ALA-1 uses broadcast.

ALA-2 uses point-to-point.

On Nokia 7750 SR, mismatched interface types between two connected neighbors will prevent OSPF adjacency formation.

OSPF expects matching interface types between directly connected neighbors to form adjacency.

Thus, this statement is incorrect.

D — Correct statement (NOT an incorrect one):

Different OSPF interface metrics do not prevent adjacency formation. They affect route selection only.

So, this statement is true and not incorrect.

—

Final Answer: B, C

—

Comprehensive and Detailed Explanation From Exact Extract:

From Nokia 7750 SR OS Routing Protocols Guide (OSPF Interface Types and Requirements):

“Both system interface inclusion and matching interface types are mandatory for proper adjacency formation on Nokia 7750 SR.”

“Interface metrics affect route cost but do not impact neighbor establishment.”

—

Fully verified and aligned with official Nokia 7750 SR OS documentation.

—

Comprehensive and Detailed Explanation From Exact Extract:

From Nokia 7750 SR OS CLI Guide (Static Route Configuration Syntax):

“Correct syntax: configure router static-route next-hop ”

Only option D uses the correct syntax and exact keyword structure.

Thus, correct answer is D.

—

Comprehensive and Detailed Explanation From Exact Extract:

From Nokia 7750 SR OS Routing Protocols Guide (NSSA Operation):

“AS-external routes originated within NSSA areas are carried as Type 7 LSAs. ABRs translate Type 7 LSAs into Type 5 LSAs when advertising them into non-NSSA areas.”

Thus, correct answer: D.

Comprehensive and Detailed Explanation From Exact Extract:

According toNokia 7750 SR OS OSPF Guide — OSPF Packet Transmission Section:

“OSPF is encapsulated directly over IP using protocol number 89. It does not use TCP or UDP.”

TCP (Protocol 6) → Incorrect.

UDP (Protocol 17) → Incorrect.

OSPF operates directly at IP layer using protocol number 89.

Thus, the correct answer isD.

Comprehensive and Detailed Explanation From Exact Extract:

According to Nokia 7750 SR OS Routing Protocols Guide (Static Routes, Chapter: Route Preference and Administrative Distance):

"Static routes are assigned a default preference value of 10. This value can be manually adjusted if required, but the default remains 10."

Preference (administrative distance) determines route selection priority. A lower preference value is more preferred. The Nokia SR OS default preference values for major protocols are:

Direct: 0

Static: 10

OSPF: 150

BGP: 170

Therefore, the correct answer is C.

—

Comprehensive and Detailed Explanation From Exact Extract:

According to Nokia 7750 SR OS Routing Protocols Guide (OSPF Operational Commands, Chapter: Verifying OSPF):

"The 'show router ospf status' command provides global information about OSPF operation on the router, including the number of SPF calculations performed."

The other commands show area-specific information (option A), neighbor states (option B), or interface parameters (option C), but not the SPF count.

Thus, correct answer is D.

—

Comprehensive and Detailed Explanation From Exact Extract:

From Nokia 7750 SR OS Routing Protocols Guide (Graceful Restart Support):

Graceful Restart is supported by OSPF and IS-IS for IGPs.

BGP also supports Graceful Restart (but BGP is not an IGP).

RIPv1 and RIPv2 do not support Graceful Restart.

Thus, correct answers: B, C.

—

Comprehensive and Detailed Explanation From Exact Extract:

From Nokia 7750 SR OS Routing Protocols Guide (OSPF LSA Types Summary):

A (Router LSA - Type 1): Always area-scoped.

B (Network LSA - Type 2): Always area-scoped.

C & D (Summary LSAs - Type 3): Flooded between areas.

E (AS-External LSAs - Type 5): Have AS-wide scope.

Thus, correct answers: A, B.

—