Pass the Nokia Optical Network Services Expert 4A0-220 Questions and answers with ExamsMirror

The Shutting Down state is a transient state that occurs when a TE-link is set to maintenance mode in the NFM-T. In this state, the TE-link is not available for routing new LSPs, but the existing LSPs (SNCs) that use the TE-link are not immediately terminated. Instead, they are soft-rerouted, which means that they are gracefully switched to alternative paths without disrupting the traffic. The Shutting Down state lasts until all the SNCs on the TE-link are successfully soft-rerouted or forcefully terminated. After that, the TE-link transitions to the Administrative Maintenance state, where no traffic can be routed over the TE-link12. References:

1: Nokia GMPLS-controlled Optical Networks Course | Nokia

2: Nokia Network Functions Manager for Transport User Guide | Nokia

The OSPF-TE protocol is an extension of the Open Shortest Path First (OSPF) protocol that is used to exchange information about the state of links in a GMPLS network. OSPF-TE advertises link attributes such as bandwidth, latency, priority, protection, or switching capabilities to other nodes in the same area. OSPF-TE enables nodes to build a Traffic Engineering Database (TED) that contains the topology and resource information of the network. OSPF-TE helps nodes to perform CSPF calculations and establish LSPs using RSVP-TE signaling. References : Open Shortest Path First - Wikipedia, Understand Open Shortest Path First (OSPF) - Design Guide, RSVP-TE and OSPF-TE extensions for GMPLS