Nutanix Certified Services Consultant (NCSC): Level 1 (NCSC-Level-1) Practice Test

Questions # 21:

A customer racks all nodes in the new cluster. The customer does not allow IPv6 for node discovery.

The consultant is not allowed to use the consultant’s own flat switch in the customer’s environment.

Which step should the consultant take to resolve this issue?

Options:

Bare metal image all nodes with Foundation VM.

Image each node individually with Foundation VM.

Connect to the top of rack switch and discover the nodes with IPv4.

Open a console to all nodes and statically assign IP addresses.

Questions # 22:

A consultant successfully completes a Foundation using a flat switch. The consultant then works with the customer to move the cluster over to their production network. After the move, the CVMs and hypervisors can no longer communicate, which prevents the cluster from starting.

Which option should be used to resolve this issue?

Options:

If the IPMI is in use, check that the IPMI can ping the default gateway over IPv6.

Make sure that the IPMI and CVM VLAN is manually tagged on the Host and CVM.

Verify that IPv6 Link Local and DHCP is enabled on all switch ports.

If using VLANs, confirm the hypervisor/CVM VLAN is set as Native on the switch ports.

Questions # 23:

What reference materials should be provided to the customer during the Knowledge Transfer?

Options:

Questionnaire, technical slides and checklist, links to documentation and resources

As-Built Guide, technical slides and checklist, Network Diagram

As-Built Guide, Project Plan, links to documentation and resources

As-Built Guide, technical slides and checklist, links to documentation and resources

Viewing page 3 out of 3 pages

Viewing questions 21-30 out of questions

Spring Special Limited Time 70% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code = getmirror

Pass the Nutanix SE Academy NCSC-Level-1 Questions and answers with ExamsMirror

Exam NCSC-Level-1 Premium Access

Options:

Options:

Options:

TOP CODES