Summer Certification Limited Time 70% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code = getmirror

Pass the Oracle Session Border Control 1z0-404 Questions and answers with ExamsMirror

Practice at least 50% of the questions to maximize your chances of passing.
Exam 1z0-404 Premium Access

View all detail and faqs for the 1z0-404 exam

Go to Exam

834 Students Passed

86% Average Score

96% Same Questions
Viewing page 2 out of 3 pages
Viewing questions 11-20 out of questions
Questions # 11:

When provisioning the redundancy-configuration, the peer name for each of the peers in a High Availability configuration must also be defined in each system’s ______________.

Options:

A.

hostname parameter under the sip-config configuration element

B.

hostname parameter under the account-config configuration element

C.

hostname parameter under the bootparam configuration branch

D.

target name parameter under the bootparam configuration branch

E.

hostname parameter under the system-config configuration element

Questions # 12:

What is the first thing you must do when setting up the boot parameters of the Session Border Controller?

Options:

A.

reset the system clock

B.

know the superuser mode password and access the configuration mode

C.

disable FTP access to the wancom0 management interface

D.

obtain the bootparam license

E.

verify the configuration by executing the verify-config command

Questions # 13:

Which three statements are true about the bootloader? (Choose three.)

Options:

A.

It decompresses the image file and loads it into the main RAM

B.

It reads the image file

C.

It is based on Linux

D.

It looks at the boot parameters

E.

It is a Windriver’s VxWork product

Questions # 14:

Your customer would like to allow call attempts only from User Agents (UAs) who have previously registered through the Session Border Controller or who are configured as session agents.

How would you accomplish this?

Options:

A.

Navigate to the sip-port configuration element and set the allow-anonymous parameter to agents-only.

B.

Navigate to the session-agent configuration element and set the allow-anonymous parameter to prev-registered.

C.

Navigate to the sip-port configuration element and set the allow-anonymous parameter to realm-prefix.

D.

Navigate to the sip-port configuration element and set the allow-anonymous parameter to registered.

E.

Navigate to the session-agent configuration element and set the allow-anonymous parameter to 403-forbidden.

Questions # 15:

Which two statements are true about dynamic realm bridging? (Choose two.)

Options:

A.

Egress realm can be any, depending on time-of-day, called number, and so on.

B.

Dynamic realm bridging is the routing of a signaling message coming from a given ingress realm to a next hop in an egress realm.

C.

Dynamic realm bridging is a one-to-one association accomplished by using SIP-NAT.

D.

Ingress and egress realms are unconditionally paired.

E.

Dynamic realm bridging decisions are based solely on layer 3 (IP) information.

Questions # 16:

You are configuring access rules in a Session Border Controller Peering architecture.

Which configuration step is required to allow access from any User Agent (UA)?

Options:

A.

Navigate to the sip-port configuration element and set the allow-anonymous parameter to all.

B.

Navigate to the realm-config configuration element and set the addr-prefix parameter to the IP subnet of your trusted User Agent (UA).

C.

Navigate to the sip-port configuration element and set the allow-anonymous parameter to address-prefix.

D.

Navigate to the session-agent configuration element and set the ip-address parameter to the IP subnet of your trusted User Agent (UA).

E.

Navigate to the sip-port configuration element and set the allow-anonymous parameter to agents-only.

Questions # 17:

You are adding peers to a Policy-Based Realm Bridging (PBRB) configuration.

Which two configuration steps, among others, are required? (Choose two.)

Options:

A.

Navigate to the media-manager configuration branch and configure the realm-config configuration element.

B.

Navigate to the session-router configuration branch and configure the sipd-address configuration element.

C.

Navigate to the session-router configuration branch and configure the local-policy configuration element.

D.

Navigate to the session-router configuration branch and configure the sip-nat configuration element.

E.

Navigate to the media-manager configuration branch and configure the access-control configuration element.

Questions # 18:

You are configuring a sip-interface configuration element. You encounter the error message: Error 409 saving configuration SipInterface.

Identify the cause of the error.

Options:

A.

You are creating a sip-port element with the same address parameter value of another sip-port.

B.

You are creating a sip-port element with the same port parameter value of another sip-port.

C.

You are creating a sip-port element with the same transport-protocol parameter value of another sip-port.

D.

You are creating a sip-interface element with the same realm-id parameter value of another sip-interface.

E.

You are creating a sip-interface element with a different realm-id parameter value of another sip-interface.

Questions # 19:

To ensure proper operation of a Session Border Controller High Availability (HA) pair, it is critical that both of the devices can originate legitimate traffic on media interfaces independent of the network interface IP address.

How is this type of traffic accommodated?

Options:

A.

by setting the pri-utility-addr, sec-utility-addr, and sec-gateway values to addresses in the same subnet as the IP address configured on the management interfaces

B.

by setting the pri-utility-addr, sec-utility-addr, and sec-gateway values to addresses in the same subnet as the IP address configured on the media interfaces

C.

by setting the utility address and sec-gateway values to addresses in different subnets as the IP address configured on the wancom interfaces

D.

by setting a unique address on the wancoml and wancom2 interfaces via the utility address command

E.

via the utility address parameters on the wancoml and wancom2 interfaces

Questions # 20:

You want to prevent the Session Border Controller from generating a unique Call-ID and from modifying the dialog tags.

How would you accomplish this?

Options:

A.

Navigate to the sip-interface configuration element and set the dialog-transparency parameter to disabled.

B.

Navigate to the sip-config configuration element and set the dialog-mapping parameter to disabled.

C.

Navigate to the sip-config configuration element and set the call-id-transparency parameter to disabled.

D.

Navigate to the sip-config configuration element and set the dialog-transparency parameter to disabled.

E.

Navigate to the sip-config configuration element and set the dialog-transparency parameter to enabled.

Viewing page 2 out of 3 pages
Viewing questions 11-20 out of questions
TOP CODES

TOP CODES

Top selling exam codes in the certification world, popular, in demand and updated to help you pass on the first try.

2V0-11.25
ADM-201
Agentforce-Specialist
CMMC-CCP
Data-Cloud-Consultant
PDI
PSE-Strata-Pro-24
Secure-Software-Design
Sharing-and-Visibility-Architect
Workday-Pro-Integrations
ZDTA