Pass the RUCKUS High-stakes Industry Certifications RCWA Questions and answers with ExamsMirror

When onboarding access points (APs) toRUCKUS One, the system requires essential identifiers to register and associate the devices with the correct organization and physical site.

According toRUCKUS One Online Help – Device Onboarding and Registration, administrators must specify:

Device Serial Number (A):Unique hardware ID for authentication and cloud linkage.

Device Model (B):Ensures the correct firmware image and configuration profile are applied.

Venue to Assign to Devices (D):Determines the logical and geographical site placement for analytics and management grouping.

Device name and WLAN settings are optional and configured later after registration.

RUCKUS BeamFlex+is an advanced adaptive antenna technology that dynamically selects from thousands of possible antenna patterns to optimize signal quality and performance for each client connection. UnlikeTransmit Beamforming (TxBF), which depends on feedback from client devices that must support specific beamforming protocols,BeamFlex+ operates entirely on the access point side.

The key advantage of BeamFlex+ is thatit does not require any client-side support or compatible drivers. It continuously analyzes signal characteristics and client locations to select the optimal antenna pattern in real time, enhancing both range and throughput without additional client configuration.

According to theRUCKUS One Online HelpandRUCKUS AI documentation, BeamFlex+ combinesadaptive antenna pattern selectionwithpolarization diversity (PD-MRC)to improve performance in dynamic environments. In contrast,Tx Beamformingrequires explicit feedback (channel state information) from clients—limiting its effectiveness when clients lack driver or chipset compatibility.

Thus, the correct answer isD, as BeamFlex+ provides all the benefits of adaptive beamforming without the need for client-side dependencies.

OFDMA (Orthogonal Frequency Division Multiple Access)is one of the core features introduced inIEEE 802.11ax (Wi-Fi 6). It divides a channel into smaller subcarriers calledResource Units (RUs), allowing an AP to communicate with multiple clients simultaneously, both on uplink and downlink.

According to theRUCKUS One Online Help – Wi-Fi 6 Features Overview, OFDMA improves spectrum efficiency, reduces latency, and increases throughput in high-density environments. RUCKUS APs such as theR750andR850use OFDMA in coordination withRUCKUS AI’s client traffic analysisto allocate resources dynamically.

In contrast,MU-MIMOalso supports multi-user communication but only in one direction (downlink for 802.11ac Wave 2, both for 11ax).QAM256enhances modulation efficiency but doesn’t enable concurrent multi-client service.

Auto Cell Sizing (ACS)is a RUCKUS feature designed to automatically optimize the RF environment by dynamically adjustingtransmit power levelsof access points to ensure balanced coverage and minimal interference between APs.

According to theRUCKUS One Online Help – RF Management and Auto Cell SizingandRUCKUS AI documentation – RF Optimization Tools, ACS:

Automatically adjusts radio transmit power (B)based on environmental conditions and neighboring AP coverage.

Requires background scanning to be enabled (D)so the system can measure the surrounding RF conditions and interference patterns.

ACS doesnot automatically adjust channel selection, as that functionality is handled byChannelFly, a separate RUCKUS technology. It isnot enabled by default, and manual power tuning is typically disabled when ACS is active, since the controller manages power dynamically to maintain optimal cell overlap.

Thus, the correct answers areB(it can automatically adjust radio power) andD(it requires background scanning to be enabled).

TheClient Isolationfeature on RUCKUS access points and controllers prevents wireless clients connected to the same SSID from communicating directly with each other within the same subnet. This is particularly important for guest or public networks to enhance security and privacy. However, administrators may sometimes need to allow access to specific network services or devices—such as printers, gateways, or media servers—within that same subnet.

RUCKUS systems address this need through theIsolation Whitelistcapability. As described in theRUCKUS One Online HelpandRUCKUS Cloud documentation, theIsolation Whitelistallows administrators to specify destination IP or MAC addresses that are exempt from client isolation rules. This enables controlled access without fully disabling client isolation across the network.

Other options likedirected multicastoraccess control list (ACL)manage traffic types or filtering policies but are not specific to client-to-client communication exceptions. Therefore, theIsolation Whitelistis the correct answer.

When enabling802.1X authenticationon a RUCKUSAccess Portvia anEthernet Port Profile(used for ICX switches or AP wired interfaces), the available roles are:

(A) Supplicant:The device (AP or switch port) acts as the client that must authenticate to the upstream authenticator (e.g., a switch or NAC system).

(C) Port-based Authenticator:The device enforces 802.1X authentication for devices connected to it (e.g., a switch controlling a connected host).

According toRUCKUS One Online Help – 802.1X and Wired Authentication ConfigurationandRUCKUS Analytics 3.5 User Guide – Wired Client Authentication Monitoring, these two roles define whether the port initiates or enforces authentication.

“Host-based” and “MAC-based” refer to specific authenticationmethods, notroles, and “Authentication Server” (e.g., RADIUS) is an external entity, not a port role.

When configuring an802.1X-secured WLAN, RUCKUS systems such asSmartZone,RUCKUS One, orRUCKUS Cloudtypically rely on anexternal RADIUS serverfor user authentication. However, in the event of acontroller failure or connectivity loss to the RADIUS server,RUCKUS APs can continue to authenticate users locally if thelocal user databaseis enabled and configured.

TheLocal Authentication Databaseallows APs or controllers to store a limited set of credentials that can be used when external AAA services are unavailable. This ensurescontinued access and redundancyfor critical WLANs without requiring external dependency. According toRUCKUS One Online Help – WLAN Configuration and AAA Settings, enabling theLocal Authentication Databaseprovides fallback authentication for 802.1X clients during system or connectivity failures.

In contrast, theproxyandnon-proxymodes define how authentication requests are relayed to the RADIUS server, whileDynamic PSK (DPSK)is a separate authentication method that replaces 802.1X with per-user keys.

Whenspectrum analysis modeis enabled on aRUCKUS Access Point, the AP’s radios are temporarily dedicated to spectrum scanning and interference analysis, meaning they cannot serve wireless clients during that period. Therefore,new clients will not be able to join, and existing clients are typically disconnected.

According to theRUCKUS One Online Help – Spectrum Analysis ToolandRUCKUS AI Documentation – RF Monitoring and Optimization, spectrum analysis mode captures and reportsRF energy utilization, identifying interference sources such as non-Wi-Fi devices, microwave ovens, or Bluetooth. The AP alternates its radio into “sniffer” mode to analyze RF characteristics, during whichclient association and data traffic handling are suspended.

The output is visualized throughgraphs and real-time utilization charts, not histograms. Furthermore, an AP can only scan one band (either 2.4 GHz or 5 GHz) at a time — not both simultaneously.

Thus, the correct answer isA, since enabling spectrum analysis prevents new client associations while the AP is in scanning mode.

TheIEEE 802.11kamendment enhances Wi-Fi client roaming by allowing an AP to share information about nearby access points with connected clients. This process, known as theNeighbor Report, provides alist of available APsthat the client can use to make faster, more informed roaming decisions.

When a client device receives this neighbor list, it canscan fewer channels, reducing latency and improving the handoff experience—especially in enterprise networks managed byRUCKUS One,SmartZone, orRUCKUS Cloud. According toRUCKUS One Online HelpandRUCKUS AI documentation, enabling802.11k/v/rfeatures together allows forfast and seamless roaming, as 802.11k supplies discovery data, 802.11v assists with steering decisions, and 802.11r enables fast re-authentication.

OptionCis correct because 802.11k’s core function is to help clients identify the best potential APs to roam to. The other options describe unrelated functions: encryption caching relates to 802.11r, ignoring weak clients is an AP policy function, and forcing disconnections occurs during load balancing or steering—not through 802.11k.

DPSK (Dynamic Pre-Shared Key)technology in RUCKUS SmartZone provides individual or group-based pre-shared keys to enhance WLAN security while maintaining user simplicity.

According to theRUCKUS One Online Help – DPSK ConfigurationandSmartZone WLAN Authentication Guide, aGroup DPSKallows multiple devices to authenticate using a single passphrase while still maintaining encryption isolation per device. This feature is typically used in shared-device environments such as classrooms, labs, or conference rooms.

TheBound DPSKtype is assigned to specific devices or user accounts, ensuring individual control, whileUnboundDPSKs are not tied to any particular user or MAC address.

Group DPSKs balance security and convenience by permitting shared access under one key but with independent encryption sessions, which prevents data leakage among group members.