Pass the Supermicro MI300X GPU SMI300XS Questions and answers with ExamsMirror

The SKU (Stock Keeping Unit) forSupermicro NVMe backplanesvaries depending on thespecific model and system configuration.

Thecorrect SKU for the NVMe backplane used in the Supermicro MI300X system differs from the given part number.

Referencingofficial Supermicro product sheets and service manuals, theBPN-NVME5-HS219N-S24 does not matchthe correct SKU for this system.

Official Documentation Reference:

Supermicro NVMe Storage System Compatibility Guidelists the correct SKU for MI300X GPU systems, confirming that the given SKU is incorrect.

To remove theheatsink from the motherboard tray,a T30 Torx bit is required. This tool ensuresproper torque applicationandprevents damageto both the heatsink and the motherboard.

Why a T30 Torx bit is necessary?

Supermicro MI300X GPU systems use precision heatsink retention mechanisms.

Theheatsink screws are secured with factory torque settingsand require aT30 Torx bitfor safe removal.

Using an incorrect tool (Phillips screwdriver, T20, or T40) can strip the screw heads, making it difficult to remove the heatsink without causing damage.

Incorrect Answers Explained:

A (PH2 Phillips screwdriver)→ Not strong enough for heatsink screws, which requirehigh torquefor proper seating.

C (T20 Torx bit)→ Toosmall, risksstrippingthe screws.

D (T40 Torx bit)→ Toolarge, does not fit the heatsink screws.

Official Documentation Reference:

Supermicro MI300X Service Manualspecifies that aT30 Torx bitmust be used to remove the heatsinkwithout damaging the motherboard.