Summer Certification Limited Time 70% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code = getmirror

Pass the VMware VCAP-NV Design 2020 3V0-42.20 Questions and answers with ExamsMirror

Practice at least 50% of the questions to maximize your chances of passing.
Exam 3V0-42.20 Premium Access

View all detail and faqs for the 3V0-42.20 exam

Go to Exam

704 Students Passed

84% Average Score

91% Same Questions
Viewing page 2 out of 2 pages
Viewing questions 11-20 out of questions
Questions # 11:

Which type of design includes vendor models, host names, IP Addresses, port connections, logical unit number sizes, and number of CPUs? (Choose the best answer.)

Options:

A.

Physical Design

B.

Conceptual Design

C.

High-Level Design

D.

Logical Design

Questions # 12:

An architect is helping an organization with the Logical Design of an NSX-T Data Center solution.This information was gathered during the Assessment Phase:

    There isn’t much budget available for a new off shore site.

    The new site is decentralized and no communication with the main data center is required.

    The design will need to cater for availability, upgrades, and failure scenarios.

    N+1 must be maintained at all times.

Which three selections should the architect recommend in their design? (Choose three.)

Options:

A.

Separate the hosts physical NICs for VSS and N-VDS.

B.

Make all pNICs part of N-VDS and VMKs will be migrated.

C.

Collapse the Management/Edge/Compute cluster.

D.

Install a minimum 4 ESXi hosts in the site.

E.

A Shared Edge/Management cluster and one for Compute.

F.

Install a minimum of 3 ESXi hosts in the site.

Questions # 13:

What is a design justification for a solution with 3 NSX Manager nodes deployed in a 4 ESXi cluster Management Cluster? (Choose the best answer.)

Options:

A.

NSX Controllers are separated from NSX Managers allowing 6 ESXi servers to host them.

B.

NSX Management Plane and Control Plane will be reduced to a single point of failure.

C.

Compute consumption guarantees NSX Manager nodes can be run on the same ESXi host.

D.

Single point of failure on Control Plane and Management Plane will be mitigated.

Questions # 14:

According to the Discover Task of the Engagement Lifecycle, which statement would be classified as a risk? (Choose the best answer.)

Options:

A.

Enough power and cooling capacity is available in each rack in the data center.

B.

To retain certification to provide financial services to end customers, PCI-DSS audits need to be passed.

C.

A merger and acquisition process was recently completed and new company on-boarding is not completed.

D.

Due to existing contracts and purchase agreements, the existing server hardware needs to be reused.

Questions # 15:

An architect is helping an organization with the Physical Design of an NSX-T Data Center solution.

This information was gathered during a workshop:

    There are six hosts and hardware has already been purchased.

    Customer is planning a collapsed Management/Edge/Compute cluster.

    Each host has two 10Gb NICs connected to a pair of switches.

    There should be no single point of failure in any proposed design.

Which virtual switch design should the architect recommend to the organization? (Choose the best answer.)

Options:

A.

Create a vSphere Distributed Switch (vDS) for Management VMkernel traffic and assign one NIC. Also, create an NSX-T Virtual Distributed Switch (N-VDS) for overlay traffic and assign one NIC.

B.

Create an NSX-T Virtual Distributed Switch (N-VDS) for Management VMkernel traffic and assign one NIC. Also, create an NSX-T Virtual Distributed Switch (N-VDS) for overlay traffic and assign one NIC.

C.

Create an NSX-T Virtual Distributed Switch (N-VDS) for Management VMKernel and overlay traffic and assign both NICs.

D.

Create an NSX-T Virtual Distributed Switch (N-VDS) for Management VMkernel and overlay traffic and assign a new virtual NIC.

Questions # 16:

A customer has a requirement to implement a next generation firewall (NGFW) to improve security network introspection. The customer wants to apply the NGFW to all workloads exposed both internally and externally. The customer wants the NGFW to work seamlessly with NSX-T Data Center and vSphere.

Which solution should be recommended to the customer? (Choose the best answer.)

Options:

A.

Use network introspection only on the external workloads and use NSX DFW for internal workloads.

B.

Apply the NGFW on bare metal hosts which will offer better performance of inline network introspection.

C.

Apply the NGFW to internal and external workloads for increased protection and use NSX-T Data Center with Federation to set network policies.

D.

Use NSX-T Data Center leveraged with NSX Intelligence to protect all workloads at the network inspection level.

Questions # 17:

An architect is helping an organization with the Conceptual Design of an NSX-T Data Center solution.

This information was gathered by the architect during the Discover Task of the Engagement Lifecycle:

    Existing hardware will be used in any design proposal.

    Network bandwidth cannot be expanded.

Which concept of the Discover Task do these items belong to? (Choose the best answer.)

Options:

A.

constraint

B.

requirement

C.

risk

D.

assumption

Viewing page 2 out of 2 pages
Viewing questions 11-20 out of questions
TOP CODES

TOP CODES

Top selling exam codes in the certification world, popular, in demand and updated to help you pass on the first try.

2V0-11.25
ADM-201
Agentforce-Specialist
CMMC-CCP
Data-Cloud-Consultant
PDI
PSE-Strata-Pro-24
Secure-Software-Design
Sharing-and-Visibility-Architect
Workday-Pro-Integrations
ZDTA