Spring Special Limited Time 70% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code = getmirror

Home
BICSI
RCDD Certification
RCDD-002
BICSI Registered Communications Distribution Designer - RCDD Questions and Answers

Pass the BICSI RCDD Certification RCDD-002 Questions and answers with ExamsMirror

Practice at least 50% of the questions to maximize your chances of passing.

Exam RCDD-002 Premium Access

View all detail and faqs for the RCDD-002 exam

Go to Exam

790 Students Passed

95% Average Score

95% Same Questions

Viewing page 2 out of 11 pages

Viewing questions 11-20 out of questions

Questions # 11:

A security program consists of three independent components. They are electronic, architectural, and:

Options:

Operational

Physical

Environmental

Elemental

Answer

Questions # 12:

You are designing an audible alarm notification system for an office environment with an ambient noise level of 55 dBA. What dBA level should the horn be set at?

Options:

40 dBA

50 dBA

55 dBA

65 dBA

70 dBA

Answer

Questions # 13:

What is the MOST important aspect of fire alarm signaling?

Options:

Audibility

Clarity

Reliability

Intelligibility

Answer

Questions # 14:

Which of the following is NOT a type of intrusion detection system sensor?

Options:

Time-auxiliary

Capacitance

Vibration

Electromechanical

Thermal

Answer

Questions # 15:

Given the following values, calculate the focal length of the camera lens.

- Distance of the camera to the object is 5 m

- Vertical field of view is 2 m

- Horizontal field of view 1 m

Options:

1 meter

5 meters

10 meters

50 meters

100 meters

Answer

Questions # 16:

Which type of cable tray is best described as a ventilated bottom with side rails?

Options:

Ventilated channel

Ladder

Spline

Ventilated trough

Basket tray

Answer

Questions # 17:

Which of the following is NOT considered acceptable in an information technology system (ITS) conduit design and installation?

Options:

Contains no continuous sections longer than 30 m (100 ft)

Bonded to ground on one or both ends in accordance with national or local code requirements

Will withstand the environment to which they were exposed

Uses flexible conduit to access wall outlets

Avoid routing conduit over or adjacent to heat sources

Answer

Questions # 18:

In the ceiling zone method of distribution, the usable floor area should be divided into zones each measuring:

Options:

9.3 sq m (100 sq ft) to 23 sq m (250 sq ft)

23 sq m (250 sq ft) to 56 sq m (600 sq ft)

23 sq m (250 sq ft) to 84 sq m (904 sq ft)

56 sq m (600 sq ft) to 84 sq m (904 sq ft)

56 sq m (600 sq ft) to 100 sq m (1,100 sq ft)

Answer

Questions # 19:

When placing an optical fiber cable in the horizontal optical fiber cabling subsystem, what is the MAXIMUM number of splices that can be used?

Options:

Answer

Questions # 20:

You are designing a horizontal distribution system that will have a zone box located 71.6 m (235 ft) away from the telecommunications room (TR). A 50 mm (2 in) conduit is designed from the TR to a pull box located 36.6 m (120 ft) away from the TR. A 1 1/2 inch conduit is designed from the pull box to the zone box located 35.1 m (115 ft) beyond the pull box. Assuming no conduit bends, and excluding the TR and zone box, what is the total number of pull boxes/pull points required in this horizontal conduit system between the telecommunications room (TR) and zone box?