Pass the Checkpoint CCSA R81 156-215.81 Questions and answers with ExamsMirror

Automatic Hide NAT enables Source Port Address Translation by default1. This means that the source IP address and port number are translated to a different IP address and port number. This allows multiple hosts to share a single IP address for outbound connections. References: Check Point R81 Firewall Administration Guide

The administrator can edit a list of trusted SmartConsole clients in three ways: in cpconfig on a Security Management Server, in the WebUI logged into a Security Management Server, and in SmartConsole: Manage and Settings > Permissions and Administrators > Advanced > Trusted Clients

You should generate new licenses when the existing license expires, the license is upgraded, or the IP address associated with the license changes. These situations invalidate the current license and require a new one to be obtained from the Check Point User Center and installed on the Security Management Server or Security Gateway. Installing contract files or upgrading devices do not affect the validity of the license12 References: Check Point R81, Managing and Installing license via SmartUpdate

 Snapshot is the backup utility that captures the most information and tends to create the largest archives. Snapshot creates an image of the entire system, including operating system files, configuration files, databases, and logs. It can be used to restore the system in case of a failure or corruption. Backup creates a compressed file that contains configuration files and databases, but not operating system files or logs. It can be used to restore configuration settings and policies. Database Revision creates a backup of only the database files that store policies and objects. It can be used to revert to a previous revision of the database. Migrate export creates a compressed file that contains configuration files, databases, and logs, but not operating system files. It can be used to migrate data from one machine to another with different hardware or software versions.References: [Backup and Restore], [Database Revision Control], [Migrate Tools], [Hewlett Packard Enterprise Support Center]

Suspicious Activity Monitoring (SAM) is the utility that is used to block activities that appear to be suspicious. SAM allows administrators to block connections from specific IP addresses or network objects for a specified period of time3. Penalty Box is a feature of SAM that automatically blocks connections from sources that generate too many log entries. Drop Rule in the rulebase is a firewall action that discards packets that match certain criteria. Stealth rule is a firewall rule that prevents direct access to the Security Gateway from external sources.

The commands you could use to set the IP to 192.168.80.200/24 and default gateway to 192.168.80.1 after the initial installation on Check Point appliance are:

set interface Mgmt ipv4-address 192.168.80.200 mask-length 24. This command sets the IPv4 address and subnet mask of the Management interface.

set static-route default nexthop gateway address 192.168.80.1 on. This command sets the default gateway for IPv4 routing.

save config. This command saves the configuration changes.

References: [Check Point R81 Gaia CLI Reference Guide], [Check Point R81 Gaia Administration Guide]

This answer is correct because this is the recommended way to configure a VPN tunnel between two subnets and not all subnets defined in the default VPN domain of your gateway1. By creating a dedicated VPN Community, you can specify the VPN peers and the encryption settings for the VPN tunnel2. By selecting the local gateway in the Community, you can set the VPN Domain to ‘User defined’ and put in the local network that you want to include in the VPN tunnel1. This way, you can limit the VPN traffic to the subnets that you want and avoid unnecessary encryption and decryption of other traffic.

The other answers are not correct because they are either outdated or incorrect ways to configure a VPN tunnel between two subnets. Answer A and C are outdated methods that involve editing the user.def file, which is not recommended and can cause problems with the VPN configuration3. Answer D is incorrect because creating an in-line layer rule with source and destination containing the two networks used for the IKE P2 SA will not affect the VPN tunnel establishment, but only the access control policy4. The VPN column in the rule is used to specify the VPN direction, not the VPN Community name4.

How to configure a Site-to-Site VPN with a universal tunnel

Site to Site VPN R81 Administration Guide - Check Point Software

How to configure a Site-to-Site VPN with a 3rd-party remote gateway

Access Control Policy R81 Administration Guide - Check Point Software

The components of Check Point Capsule are Capsule Docs, Capsule Cloud, and Capsule Workspace123. There is no Capsule Enterprise component. Capsule Docs protects business documents everywhere they go. Capsule Cloud protects mobile users outside the enterprise security perimeter. Capsule Workspace creates a secure business environment on mobile devices. References: Check Point Capsule Datasheet, Check Point Capsule Workspace Datasheet, Mobile Secure Workspace with Capsule

When dealing with rule base layers, two layer types can be utilized: Ordered Layers and Inline Layers5. Ordered Layers are executed sequentially according to their order in the policy. Inline Layers are embedded in a parent layer and are executed only if the parent rule matches. References: Check Point R81 Firewall Administration Guide, [Check Point R81 Security Management Administration Guide]

Each cluster, at a minimum, should have at least three interfaces4. These are:

A sync interface for synchronizing state information between cluster members.

A cluster interface for sending and receiving cluster control packets.

A production interface for handling regular traffic that passes through the cluster4. References: Check Point R80.20 – How to configure Cluster firewalls – First Time Setup