Pass the Checkpoint CCSE R81 156-315.81 Questions and answers with ExamsMirror

 When SecureXL is enabled, all packets should be accelerated, except packets that match the following conditions: CIFS packets. SecureXL is a technology that accelerates network traffic processing by offloading intensive operations from the Firewall kernel to a dedicated SecureXL device. However, some packets cannot be accelerated by SecureXL due to various reasons, such as unsupported features, security policy settings, or protocol limitations. One example of packets that cannot be accelerated by SecureXL are CIFS packets, which are used for file sharing and access over SMB protocol. CIFS packets are not accelerated by SecureXL because they require stateful inspection by the Firewall kernel. 

 UserCheck is a communication tool used to inform a user about a website or application they are trying to access. UserCheck allows administrators to interact with users in real time, informing them of the security policy and the actions they need to take. UserCheck can also enable users to self-remediate incidents or request exceptions from the administrator. References: Training & Certification | Check Point Software, Check Point Resource Library

 Office mode is a feature that allows a security gateway to assign a remote client an IP address from a network that is protected by the security gateway. This way, the remote client can access resources on the internal network as if it was physically connected to it. The IP address is assigned to the remote client after the user authenticates for a tunnel, and it is routable, meaning that it can be reached by other hosts on the network. Office mode is useful for scenarios where the remote client needs to use applications that rely on IP addresses, such as VoIP or file sharing12.

References: 1: Support, Support Requests, Training … - Check Point Software 2: Gaia R81.20 Administration Guide - Check Point Software

The command to show SecureXL status is fwaccel stat. This command displays information about SecureXL acceleration, such as the number of accelerated and non-accelerated connections, the reason for non-acceleration, and the SecureXL device name and mode. The other commands are either invalid or show different statistics.

 Application Control is the software blade that provides Application Security and identity control. It allows administrators to define granular policies based on users or groups to identify, block or limit the usage of web applications and widgets. Application Control also integrates with Identity Awareness to provide user-level visibility and control. References: Training & Certification | Check Point Software, Check Point Resource Library

The responsibility of SOLR process on R81.20 management server is to generate indexes of data written to the database. SOLR is an open source search platform that provides fast and scalable indexing and querying capabilities. SOLR is used by the R81.20 management server to index data such as logs, objects, policies, tasks, and events, and to enable quick and efficient searches on this data by SmartConsole and SmartView applications. 

The tool that is used to enable ClusterXL is cpconfig. ClusterXL is a software-based Load Sharing and High Availability solution that distributes network traffic between clusters of redundant Security Gateways1. ClusterXL can be enabled on Check Point Security Gateways running on Gaia OS, SecurePlatform OS, IPSO OS, or X-Series XOS2.

To enable ClusterXL, the administrator must run the cpconfig command on each cluster member and select the option to enable ClusterXL. This will prompt the administrator to choose the ClusterXL mode (High Availability or Load Sharing) and the Cluster Control Protocol (CCP) mode (Broadcast or Multicast). After enabling ClusterXL, the administrator must reboot the cluster members for the changes to take effect34.

Therefore, the correct answer is B. The tool that is used to enable ClusterXL is cpconfig.

References:

1, Introduction to ClusterXL - Check Point Software

2, ClusterXL Requirements and Compatibility - Check Point Software

3, Configuring ClusterXL - Check Point Software

4, How to configure ClusterXL - Check Point Software Technologies

 SmartEvent automatically defines events based on IPS (Intrusion Prevention System) alerts. IPS is a feature that detects and prevents malicious network traffic based on predefined or custom signatures. IPS alerts are generated when IPS detects an attack or an anomaly that matches a signature. SmartEvent collects and correlates IPS alerts from different gateways and displays them as events in SmartEventWeb. The other options are not automatically defined as events by SmartEvent. 

 To ensure that VMAC mode is enabled, the CLI command that should be run on all cluster members is fw ctl get int fwha_vmac_global_param_enabled; result of command should return value 1. VMAC mode is a feature that allows ClusterXL to use virtual MAC addresses for cluster interfaces, instead of physical MAC addresses. This improves the failover performance and compatibility of ClusterXL with switches and routers. To check if VMAC mode is enabled, the command fw ctl get int fwha_vmac_global_param_enabled can be used, which returns 1 if VMAC mode is enabled, and 0 if VMAC mode is disabled. 

With SecureXL enabled, accelerated packets will pass through the following: Network Interface Card and the Acceleration Device. SecureXL is a technology that accelerates network traffic processing by offloading intensive operations from the Firewall kernel to a dedicated SecureXL device. Accelerated packets are packets that match certain criteria and can be handled by SecureXL without involving the Firewall kernel. These packets bypass the OSI Network Layer, OS IP Stack, and Check Point Firewall Kernel, and are processed directly by the Network Interface Card and the Acceleration Device. The other options are either incorrect or describe non-accelerated packets. 

 The command that would be used to enable the Penalty Box feature is sim erdos -e 1. Penalty Box is a feature that protects the Security Gateway from DDoS attacks by dropping packets from sources that send excessive traffic. Sim erdos is a command that allows administrators to configure and manage the Penalty Box feature. Sim erdos -e 1 enables the Penalty Box feature on the Security Gateway. The other options are either invalid or perform different functions. 

 For best practices, the recommended time for automatic unlocking of locked admin accounts is 30 minutes at least. Admin accounts can be locked due to failed login attempts, password expiration, or manual locking by another admin. To prevent unauthorized access or brute force attacks, locked admin accounts should not be unlocked automatically too soon. The recommended minimum time for automatic unlocking is 30 minutes, which can be configured from the SmartConsole under Manage > Permissions and Administrators > Advanced > Unlock locked administrators after. 

 For Stateful Mode configuration, chain modules marked with 2 will not apply. Stateful Mode configuration is a feature that allows administrators to define how packets are processed by different firewall kernel modules in inbound and outbound directions. Chain modules are firewall kernel modules that perform various security functions, such as VPN, IPS, QoS, etc. Each chain module is associated with a key, which specifies the type of traffic applicable to the chain module. The key can be one of the following values: 0 for all packets, 1 for stateful packets, 2 for stateless packets, and 3 for no match packets. For Stateful Mode configuration, only chain modules with key 0 or 1 will apply, as they handle all packets or stateful packets. Chain modules with key 2 will not apply, as they handle stateless packets, which are not relevant for Stateful Mode configuration.

The default commands that appear when right-clicking the IP address, source or destination, in an event in SmartEvent are ping, whois, nslookup, and Telnet. SmartEvent is a unified security event management solution that provides visibility, analysis, and reporting of security events across multiple Check Point products. SmartEvent has a feature that allows administrators to run common command line executables that can assist in investigating events. Right-clicking the IP address, source or destination, in an event provides a list of default and customized commands that can be executed on the IP address of the active cell. The default commands are ping, whois, nslookup, and Telnet. Ping is a command that tests the connectivity and latency between two hosts by sending packets and measuring the response time. Whois is a command that queries a database for information about the owner and registrar of a domain name or an IP address. Nslookup is a command that queries a DNS server for information about a domain name or an IP address, such as its IP address, name server, mail server, etc. Telnet is a command that establishes a remote connection to another host using the Telnet protocol. 

 According to the Check Point R81 training course, the medium path is available only when CoreXL is enabled. CoreXL is a performance-enhancing technology that allows multiple CPU cores to process traffic simultaneously. The medium path handles packets that require deeper inspection or content awareness, such as IPS, Anti-Virus, or URL Filtering. The other paths are either available regardless of CoreXL or not valid terms. References: Certified Security Expert (CCSE) R81.20 Course Overview