Pass the Checkpoint CCSE R81 156-315.81 Questions and answers with ExamsMirror

 In ClusterXL Load Sharing Multicast Mode, every member of the cluster receives all of the packets sent to the cluster IP address. This mode uses multicast MAC addresses to distribute packets to all cluster members. Each member decides whether to accept or reject the packet based on a load balancing algorithm. This mode provides better performance and scalability than Unicast mode, but requires a switch that supports multicast MAC addresses. 

According to the Check Point Resource Library, the minimum amount of RAM needed for a Threat Prevention Appliance is 4 GB. This applies to both physical and virtual appliances. The other options are either incorrect or irrelevant. References: Check Point Resource Library

The cpinfo tool generates a R81 Security Gateway configuration report that includes information about the hardware, operating system, product version, patches, and configuration settings. References: cpinfo - Check Point Support Center

NAT rules are prioritized in the following order:

Automatic Static NAT: This is the highest priority NAT rule and it translates the source or destination IP address to a different IP address without changing the port number. It is configured in the network object properties.

Automatic Hide NAT: This is the second highest priority NAT rule and it translates the source IP address and port number to a different IP address and port number. It is configured in the network object properties.

Manual/Pre-Automatic NAT: This is the third highest priority NAT rule and it allows you to create custom NAT rules that are not possible with automatic NAT. It is configured in the NAT policy rulebase before the automatic NAT rules.

Post-Automatic/Manual NAT rules: This is the lowest priority NAT rule and it allows you to create custom NAT rules that are not possible with automatic NAT. It is configured in the NAT policy rulebase after the automatic NAT rules.

The statement that is true regarding redundancy is Both ClusterXL and VRRP are fully supported by Gaia and available to all Check Point appliances, open servers, and virtualized environments. ClusterXL and VRRP are two technologies that provide high availability and load sharing for Security Gateways. They are both supported by Gaia OS and can be deployed on various platforms5. The other statements are either false or incomplete regarding redundancy. References: Check Point R81 ClusterXL Administration Guide, Check Point R81 Gaia Administration Guide

The correct command to observe the Sync traffic in a VRRP environment is fw monitor –e “accept dst=224.0.0.18;”. This command captures the packets that have the destination IP address of 224.0.0.18, which is the multicast address used by VRRP for synchronization. The other commands are either not valid or not specific to VRRP Sync traffic. References: [Check Point R81 ClusterXL Administration Guide], Check Point R81 Performance Tuning Administration Guide

SmartEvent Processes use two Check Point Protocols: ELA (Event Log Agent) and CPLOG (Check Point Log). ELA collects logs from Security Gateways and forwards them to the Log Server. CPLOG is used by the Log Server to communicate with the SmartEvent Server. References: [SmartEvent Architecture]

An event is a notification that something significant has occurred on a Check Point product or network. Events are generated by various sources, such as blades, gateways, servers, SmartEvent, etc. You can view and manage events in SmartConsole by using the Events tab in the Logs & Monitor view. Selecting an event displays its configurable properties in the Detail pane and a description of the event in the Description pane. The configurable properties include:

Severity: The level of importance or urgency of the event. You can change the severity of an event by selecting a different value from the drop-down list.

Automatic reactions: The actions that are triggered when an event occurs. You can add, edit, or delete automatic reactions for an event by clicking on the + icon or the pencil icon.

Threshold: The minimum number or frequency of occurrences of an event that triggers an automatic reaction. You can change the threshold of an event by entering a different value in the text box.

The policy is not an option to adjust or configure for an event. The policy is a set of rules that define how to handle events based on their source, type, severity, etc. You can create and manage policies in SmartEvent by using the Policies tab in the Logs & Monitor view. References: R81 Logging and Monitoring Administration Guide

The Check Point ThreatCloud is a worldwide collaborative security network that collects and analyzes threat data from millions of sensors, security gateways, and other sources, and delivers real-time threat intelligence and protection to Check Point products. References: Check Point ThreatCloud

 TACACS+ is not an authentication method that is used for Mobile Access. Mobile Access supports the following authentication methods: username and password (internal, LDAP, or RADIUS), certificate, SecurID, DynamicID, and SMS2. TACACS+ is a protocol that provides access control for routers, network access servers, and other network devices, but it is not supported by Mobile Access3. References: Check Point R81 Mobile Access Administration Guide, TACACS+ - Wikipedia

Check Point recommends configuring Disk Space Management parameters to delete old log entries when available disk space is less than or equal to a certain threshold. In this case, the correct threshold is specified as option D: 15%.

So, when the available disk space reaches or falls below 15%, old log entries should be deleted to free up space.

Options A, B, and C do not represent the recommended threshold for deleting old log entries according to Check Point's best practices.

References: Check Point Certified Security Expert (CCSE) R81 documentation and learning resources.

The fw tab -s command lists all tables in Gaia. The fw tab command displays information about the firewall tables, such as connections, NAT translations, SAM rules, etc. The -s option shows a summary of all tables. References: fw tab - Check Point Support Center

Check Point currently supports four types of APIs: R81 Management API, Identity Awareness Web Services API, OPSEC SDK, and Gaia REST API. The Open REST API is not a valid option. References: Check Point APIs

 The process that pulls application monitoring status is cpd. cpd is a daemon that runs on Check Point products and performs various tasks related to management communication, policy installation, license verification, logging, etc. cpd also monitors the status of other processes and applications on the system and reports it to the management server. cpd uses SNMP to collect information from various sources, such as blades, gateways, servers, etc. You can view the application monitoring status in SmartConsole by using the Gateways & Servers tab in the Logs & Monitor view. References: Check Point Processes and Daemons

 Check Point Mobile Web Portal is a Mobile Access Application that allows a secure container on mobile devices to give users access to internal websites, file shares and emails. The Mobile Web Portal is a web-based application that can be accessed from any browser on any device. It provides a user-friendly interface to access various resources on the corporate network without requiring a VPN client or additional software installation. The Mobile Web Portal supports authentication methods such as user name and password, certificate, one-time password (OTP), etc. The Mobile Web Portal also supports security features such as encryption, data leakage prevention (DLP), threat prevention, etc. References: R81 Mobile Access Administration Guide