Pass the Cisco CCNP Security 350-701 Questions and answers with ExamsMirror

Joining Cisco WSAs to an appliance group simplifies the task of patching multiple appliances. An appliance group is a collection of WSAs that share the same configuration settings and software versions. Administrators can use appliance groups to apply configuration changes and software updates to multiple WSAs at once, instead of performing these tasks individually for each appliance12. This reduces the administrative overhead and ensures consistency across the WSAs. References:

Appliance groups, section “Appliance Groups”.

What is the purpose of joining Cisco WSAs to an appliance group?

 The Decrypt for Application Detection feature within the WSA Decryption options enhances the ability of AsyncOS to detect HTTPS applications. The HTTPS Proxy can decrypt HTTPS connections to web applications. This allows the Application Visibility and Control (AVC) engine to more accurately detect and block web applications that use HTTPS. This feature can help improve the security and performance of the network by identifying and controlling the usage of web applications that may consume bandwidth, pose security risks, or violate compliance policies.

DNSSEC (Domain Name System Security Extensions) is a technology that protects DNS from cache poisoning and spoofing attacks by digitally signing DNS data with cryptographic keys. DNSSEC ensures the integrity and authenticity of DNS responses, preventing attackers from redirecting traffic to malicious domains. Cisco Umbrella supports DNSSEC by performing validation on queries sent from Umbrella resolvers to upstream authorities. This means that Umbrella will only accept DNS responses that are signed and verified by the authoritative servers for each domain. To enable DNSSEC validation, the organization needs to configure Cisco Umbrella and use DNSSEC for domain authentication to authoritative servers. This will ensure that Umbrella resolvers will reject any forged or tampered DNS responses and provide secure DNS resolution for the organization’s network. References :=

Some possible references are:

Implementing and Operating Cisco Security Core Technologies (SCOR) v1.0, Module 2: Network Security, Lesson 2.5: Implement DNS Security

What is DNSSEC and Why Is It Important? - Cisco Umbrella

DNSSEC General Availability – Cisco Umbrella

Multifactor authentication (MFA) is a security measure that requires two or more proofs of identity to grant access to network resources. These proofs can be something the user knows (such as a password or a PIN), something the user has (such as a token or a card), or something the user is (such as a fingerprint or a face scan). The benefit of using MFA is that it adds an extra layer of protection against unauthorized access, especially if the first factor (such as a password) is compromised or stolen. By requiring a second validation of identity, MFA reduces the risk of data breaches and identity theft. MFA can also help comply with regulatory and industry standards that mandate strong authentication for sensitive data and systems. References :=

Some possible references are:

Implementing and Operating Cisco Security Core Technologies (SCOR) v1.0, Module 1: Security Concepts, Lesson 1.3: Identity and Access Management

Multi-factor authentication best practices & strategy, NordLayer Blog

How to implement Multi-Factor Authentication (MFA), Microsoft Security Blog

Multi-factor authentication, Cyber.gov.au

What is Multi-Factor Authentication?, IBM

The Cisco Identity Services Engine (ISE) posture module provides a service that allows you to check the compliance of endpoints with corporate security policies. This service consists of three main components: client provisioning, posture policy, and authorization policy. Client provisioning ensures that the endpoints receive the appropriate posture agent, such as the AnyConnect ISE Posture Agent or the Network Admission Control (NAC) Agent. Posture policy defines the conditions and requirements that the endpoints must meet to be considered compliant, such as having the latest antivirus updates or patches installed. Authorization policy determines the level of network access granted to the endpoints based on their posture assessment results, such as allowing full access, limited access, or quarantine.

The two actions that the Cisco ISE posture module provides that ensure endpoint security are:

The latest antivirus updates are applied before access is allowed. This action prevents malware infections and protects the network from potential threats. The posture policy can include predefined or custom conditions that check the antivirus status of the endpoints, such as the product name, version, definition date, and scan result. If the endpoint does not meet the antivirus requirement, the posture agent can trigger a remediation action, such as launching the antivirus update or scan, before allowing network access.

Patch management remediation is performed. This action ensures that the endpoints have the latest security patches installed and are not vulnerable to known exploits. The posture policy can include predefined or custom conditions that check the patch status of the endpoints, such as the operating system, service pack, hotfix, or update. If the endpoint does not meet the patch requirement, the posture agent can trigger a remediation action, such as redirecting the endpoint to a patch management server or launching the patch installation, before allowing network access.

References :=

Cisco Identity Services Engine Administrator Guide, Release 2.2 - Configure Client Posture Policies

Configuring posture services with the Cisco Identity Services Engine

Cisco Identity Services Engine Administrator Guide, Release 2.0 - Posture Policy

GETVPN and IPsec are both VPN technologies that use ESP (Encapsulating Security Payload) to encrypt and authenticate data packets. However, they differ in the following aspects:

GETVPN uses a group IPSec security paradigm, which means that all group members share the same IPSec SA (Security Association) and can communicate with each other without having to establish point-to-point tunnels. IPsec, on the other hand, uses a pair-wise IPSec security paradigm, which requires each pair of devices to negotiate and maintain their own IPSec SAs and tunnels.

GETVPN uses GDOI (Group Domain of Interpretation) as a key management protocol, which allows a Key Server (KS) to distribute the encryption keys and policies to all group members. IPsec uses IKE (Internet Key Exchange) as a key management protocol, which involves two phases of negotiation between each pair of devices to establish the IPSec SAs.

GETVPN supports multicast traffic without the need for GRE (Generic Routing Encapsulation) tunneling, as it preserves the original IP header of the packet. IPsec does not support multicast traffic natively, and requires GRE tunneling to encapsulate the multicast packets with a new IP header.

GETVPN relies on the underlying WAN routing to deliver the encrypted packets to the destination, as it does not create any overlay routing. IPsec creates an overlay routing, which may introduce additional latency and complexity.

References :=

Some possible references are:

[Implementing and Operating Cisco Security Core Technologies (SCOR) v1.0], Module 6: Secure Connectivity, Lesson 6.2: Implementing Site-to-Site VPNs, Topic 6.2.2: Group Encrypted Transport VPN

Group Encrypted Transport VPN (GETVPN)

GETVPN - Cisco Community

Cisco Get VPN vs DMVPN: Difference and Comparison

What is a difference between GETVPN and IPsec?

Explanation

Diffie Hellman (DH) uses a private-public key pair to establish a shared secret, typically a symmetric key. DH is not a symmetric algorithm – it is an asymmetric algorithm used to establish a shared secret for a symmetric key algorithm.

 Cisco NBAR2 is a classification engine that recognizes and classifies a wide variety of protocols and applications based on their deep packet inspection (DPI) signatures. NBAR2 enables the platform to identify and output various applications within the network traffic flows, such as web, email, voice, video, and so on. NBAR2 also supports custom protocols and applications, allowing the platform to classify traffic based on user-defined criteria. NBAR2 helps the platform to apply the appropriate quality of service (QoS), security, and policy for each application or protocol. References :=

Some possible references are:

Cisco NBAR2

Classifying Network Traffic Using NBAR

Next Generation NBAR (NBAR2)

Explanation

A destination list is a list of internet destinations that can be blocked or allowed based on the administrative

preferences for the policies applied to the identities within your organization. A destination is an IP address

(IPv4), URL, or fully qualified domain name. You can add a destination list to Umbrella at any time; however, a

destination list does not come into use until it is added to a policy.

A DoS (Denial of Service) attack is a type of cyberattack that aims to disrupt the normal functioning of a server, service, or network by overwhelming it with a large amount of traffic or requests. A DoS attack typically uses a single computer or device to launch the attack, sending TCP (Transmission Control Protocol) or UDP (User Datagram Protocol) packets to the target server. TCP and UDP are two common protocols used to send data over the internet. TCP packets require a connection to be established between the sender and the receiver, and ensure that the data is delivered reliably and in order. UDP packets do not require a connection, and do not guarantee the delivery or order of the data. Both TCP and UDP packets can be used to flood a server with requests, consuming its resources and bandwidth, and preventing legitimate users from accessing the service.

A DDoS (Distributed Denial of Service) attack is a type of DoS attack that uses multiple computers or devices to launch the attack, creating a large network of attackers that can generate more traffic or requests than a single source. A DDoS attack often involves a botnet, which is a network of compromised computers or devices that are controlled by a malicious actor, usually through malware or hacking. The botnet can send TCP or UDP packets to the target server from different locations and IP addresses, making it harder to trace and block the attack. A DDoS attack can also target multiple servers or services that are distributed over a LAN (Local Area Network), such as a web hosting service or a cloud computing platform, affecting the availability and performance of the entire network.

The main difference between a DoS attack and a DDoS attack is the number and diversity of the sources that are involved in the attack. A DoS attack comes from a single source, while a DDoS attack comes from multiple sources. This makes a DDoS attack more powerful, faster, and harder to stop than a DoS attack.

Explanation

Explanation

NetFlow is a network protocol developed by Cisco for the collection and monitoring of network traffic flow data

generated by NetFlow-enabled routers and switches. The flows do not contain actual packet data, but rather the

metadata for communications. It is a standard form of session data that details who, what, when, and where of

network traffic -> Answer A is not correct.